Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of M3 Rotary and M3 Pro Gold NiTi files
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental). Materials and Methods One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal (60° angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test. Results Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p < 0.001). No significant difference was observed between the files in the maximum torque load, while a significantly higher angular rotation to fracture was observed for M3 Pro Gold (p < 0.05). In the DSC analysis, the M3 Pro Gold files showed one prominent peak on the heating curve and 2 prominent peaks on the cooling curve. In contrast, the M3 Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve. Conclusions The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase.
Abstract
Objectives To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental). Materials and Methods One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal (60° angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test. Results Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p < 0.001). No significant difference was observed between the files in the maximum torque load, while a significantly higher angular rotation to fracture was observed for M3 Pro Gold (p < 0.05). In the DSC analysis, the M3 Pro Gold files showed one prominent peak on the heating curve and 2 prominent peaks on the cooling curve. In contrast, the M3 Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve. Conclusions The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase.
참고문헌 (32)
- Gavini G, "Cyclic fatigue resistance of rotary nickel-titanium instruments submitted to nitrogen ion implantation", J Endod, 36, pp.1183~1186 (2010)[DOI]
- Yum J, "Torsional strength and toughness of nickel-titanium rotary files", J Endod, 37, pp.382~386 (2011)[DOI]
- Parashos P, "Rotary NiTi instrument fracture and its consequences", J Endod, 32, pp.1031~1043 (2006)[DOI]
- Pedulla E, "Influence of cyclic torsional preloading on cyclic fatigue resistance of nickel - titanium instruments", Int Endod J, 48, pp.1043~1050 (2015)[DOI]
- Cheung GS, "Instrument fracture: mechanisms, removal of fragments, and clinical outcomes", Endod Topics, 16, pp.1~26 (2007)[DOI]
- Pruett JP, "Cyclic fatigue testing of nickel-titanium endodontic instruments", J Endod, 23, pp.77~85 (1997)[DOI]
- Haikel Y, "Dynamic and cyclic fatigue of engine-driven rotary nickel-titanium endodontic instruments", J Endod, 25, pp.434~440 (1999)[DOI]
- Bryant ST, "Shaping ability of Profile rotary nickel-titanium instruments with ISO sized tips in simulated root canals: part 1", Int Endod J, 31, pp.275~281 (1998)
- Ounsi HF, "Quantitative and qualitative elemental analysis of different nickel-titanium rotary instruments by using scanning electron microscopy and energy dispersive spectroscopy", J Endod, 34, pp.53~55 (2008)[DOI]
- Plotino G, "Blue treatment enhances cyclic fatigue resistance of vortex nickel-titanium rotary files", J Endod, 40, pp.1451~1453 (2014)[DOI]
- Shen Y, "Fatigue testing of controlled memory wire nickel-titanium rotary instruments", J Endod, 37, pp.997~1001 (2011)[DOI]
- [URL]
- [URL]
- Pedulla E, "Effects of 6 single-file systems on dentinal crack formation", J Endod, 43, pp.456~461 (2017)[DOI]
- Gambarini G, "Cyclic fatigue resistance of newly manufactured rotary nickel titanium instruments used in different rotational directions", Aust Endod J, 39, pp.151~154 (2013)
- Pedulla E, "Influence of rotational speed on the cyclic fatigue of Mtwo instruments", Int Endod J, 47, pp.514~519 (2014)[DOI]
- Chang SW, "Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of V taper 2 and V taper 2H rotary NiTi files", Scanning, 38, pp.564~570 (2016)[DOI]
- Gao Y, "Effects of raw material and rotational speed on the cyclic fatigue of ProFile Vortex rotary instruments", J Endod, 36, pp.1205~1209 (2010)[DOI]
- Kramkowski TR, "An in vitro comparison of torsional stress and cyclic fatigue resistance of ProFile GT and Profile GT Series X rotary nickel-titanium files", J Endod, 35, pp.404~407 (2009)[DOI]
- Ha JH, "Effect of R-phase heat treatment on torsional resistance and cyclic fatigue fracture", J Endod, 39, pp.389~393 (2013)[DOI]
- Choi J, "Fracture resistance of K3 nickel-titanium files made from different thermal treatments", Bioinorg Chem Appl, 2016, pp.6374721~ (2016)
- Shen Y, "Metallurgical characterization of controlled memory wire nickel-titanium rotary instruments", J Endod, 37, pp.1566~1571 (2011)[DOI]
- de Vasconcelos RA, "Evidence for reduced fatigue resistance of contemporary rotary instruments exposed to body temperature", J Endod, 42, pp.782~787 (2016)[DOI]
- Kusy RP, "A review of contemporary archwires: their properties and characteristics", Angle Orthod, 67, pp.197~207 (1997)
- Ninan E, "Torsion and bending properties of shape memory and superelastic nickel-titanium rotary instruments", J Endod, 39, pp.101~104 (2013)[DOI]
- Shen Y, "Effect of environment on fatigue failure of controlled memory wire nickel-titanium rotary instruments", J Endod, 38, pp.376~380 (2012)[DOI]
- Pedulla E, "Torsional and cyclic fatigue resistance of a new nickel-titanium instrument manufactured by electrical discharge machining", J Endod, 42, pp.156~159 (2016)[DOI]
- Wu SK, "A study of electrical resistivity, internal friction and shear modulus on an aged Ti49Ni51 alloy", Acta Metall Mater, 38, pp.95~102 (1990)[DOI]
- Peters OA, "Dynamic torque and apical forces of ProFile 0.04 rotary instruments during preparation of curved canals", Int Endod J, 35, pp.379~389 (2002)[DOI]
- Bahia MG, "Decrease in the fatigue resistance of nickel-titanium rotary instruments after clinical use in curved root canals", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 100, pp.249~255 (2005)[DOI]
- Plotino G, "Cyclic fatigue of Reciproc and WaveOne reciprocating instruments", Int Endod J, 45, pp.614~618 (2012)[DOI]
- Park SY, "Dynamic torsional resistance of nickel-titanium rotary instruments", J Endod, 36, pp.1200~1204 (2010)[DOI]