Effect of surface treatment on the mechanical properties of nickel-titanium files with a similar cross-section
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: The aim of this study was to compare the mechanical properties of various nickel-titanium (NiTi) files with similar tapers and cross-sectional areas depending on whether they were surface-treated. Materials and Methods: Three NiTi file systems with a similar convex triangular cross-section and the same ISO #25 tip size were selected for this study: G6 (G6), ProTaper Universal (PTU), and Dia-PT (DPT). To test torsional resistance, 5 mm of the straightened file's tip was fixed between polycarbonate blocks (n = 15/group) and continuous clockwise rotation until fracture was conducted using a customized device. To evaluate cyclic fatigue resistance, files were rotated in an artificial curved canal until fracture in a dynamic mode (n = 15/group). The torsional data were analyzed using 1-way analysis of variance and the Tukey post-hoc comparison test, while the cyclic fatigue data were analyzed using the Mann-Whitney U test at a significance level of 95%. Results: PTU showed significantly greater toughness, followed by DPT and G6 (p < 0.05). G6 showed the lowest resistance in ultimate torsional strength, while it showed a higher fracture angle than the other files (p < 0.05). In the cyclic fatigue test, DPT showed a significantly higher number of cycles to failure than PTU or G6 (p < 0.05). Conclusions: Within the limitations of this study, it can be concluded that the torsional resistance of NiTi files was affected by the cross-sectional area, while the cyclic fatigue resistance of NiTi files was influenced by the surface treatment.
Abstract
Objectives: The aim of this study was to compare the mechanical properties of various nickel-titanium (NiTi) files with similar tapers and cross-sectional areas depending on whether they were surface-treated. Materials and Methods: Three NiTi file systems with a similar convex triangular cross-section and the same ISO #25 tip size were selected for this study: G6 (G6), ProTaper Universal (PTU), and Dia-PT (DPT). To test torsional resistance, 5 mm of the straightened file's tip was fixed between polycarbonate blocks (n = 15/group) and continuous clockwise rotation until fracture was conducted using a customized device. To evaluate cyclic fatigue resistance, files were rotated in an artificial curved canal until fracture in a dynamic mode (n = 15/group). The torsional data were analyzed using 1-way analysis of variance and the Tukey post-hoc comparison test, while the cyclic fatigue data were analyzed using the Mann-Whitney U test at a significance level of 95%. Results: PTU showed significantly greater toughness, followed by DPT and G6 (p < 0.05). G6 showed the lowest resistance in ultimate torsional strength, while it showed a higher fracture angle than the other files (p < 0.05). In the cyclic fatigue test, DPT showed a significantly higher number of cycles to failure than PTU or G6 (p < 0.05). Conclusions: Within the limitations of this study, it can be concluded that the torsional resistance of NiTi files was affected by the cross-sectional area, while the cyclic fatigue resistance of NiTi files was influenced by the surface treatment.
참고문헌 (30)
- Schäfer E, "Comparison of hand stainless steel and nickel titanium rotary instrumentation: a clinical study", J Endod, 30, pp.432~435 (2004)
- Peters OA, "Current challenges and concepts in the preparation of root canal systems: a review", J Endod, 30, pp.559~567 (2004)
- Cheung GS, "A retrospective study of endodontic treatment outcome between nickel-titanium rotary and stainless steel hand filing techniques", J Endod, 35, pp.938~943 (2009)
- Sonntag D, "Root canal shaping with manual stainless steel files and rotary Ni-Ti files performed by students", Int Endod J, 36, pp.246~255 (2003)
- Glossen CR, "A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-Flex endodontic instruments", J Endod, 21, pp.146~151 (1995)
- Sattapan B, "Defects in rotary nickel-titanium files after clinical use", J Endod, 26, pp.161~165 (2000)
- Alapati SB, "SEM observations of nickel-titanium rotary endodontic instruments that fractured during clinical use", J Endod, 31, pp.40~43 (2005)
- 조옥인, "Cyclic fatigue resistance tests of Nickel-Titanium rotary files using simulated canal and weight loading conditions", Restorative Dentistry and Endodontics, 38(1), pp.31~35 (2013), 대한치과보존학회[DOI]
- Cheung GS, "Instrument fracture: mechanisms, removal of fragments, and clinical outcomes", Endod Topics, 16, pp.1~26 (2007)
- Tsujimoto M, "Comparison of conventional and new-generation nickel-titanium files in regard to their physical properties", J Endod, 40, pp.1824~1829 (2014)
- Kim HC, "Mechanical response of nickel-titanium instruments with different cross-sectional designs during shaping of simulated curved canals", Int Endod J, 42, pp.593~602 (2009)
- Kwak SW, "Effects of pitch length and heat treatment on the mechanical properties of the glide path preparation instruments", J Endod, 42, pp.788~792 (2016)
- Shen Y, "Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments", J Endod, 39, pp.163~172 (2013)
- Kuhn G, "Influence of structure on nickel-titanium endodontic instruments failure", J Endod, 27, pp.516~520 (2001)
- Yum J, "Torsional strength and toughness of nickel-titanium rotary files", J Endod, 37, pp.382~386 (2011)
- Schneider SW, "A comparison of canal preparations in straight and curved root canals", Oral Surg Oral Med Oral Pathol, 32, pp.271~275 (1971)
- Pruett JP, "Cyclic fatigue testing of nickel-titanium endodontic instruments", J Endod, 23, pp.77~85 (1997)
- Panitvisai P, "Impact of a retained instrument on treatment outcome: a systematic review and meta-analysis", J Endod, 36, pp.775~780 (2010)
- McGuigan MB, "The impact of fractured endodontic instruments on treatment outcome", Br Dent J, 214, pp.285~289 (2013)
- Xu X, "Comparative study of torsional and bending properties for six models of nickel-titanium root canal instruments with different cross-sections", J Endod, 32, pp.372~375 (2006)
- Park SY, "Dynamic torsional resistance of nickel-titanium rotary instruments", J Endod, 36, pp.1200~1204 (2010)
- Wycoff RC, "An in vitro comparison of torsional stress properties of three different rotary nickel-titanium files with a similar cross-sectional design", J Endod, 38, pp.1118~1120 (2012)
- Baek SH, "Comparison of torsional stiffness of nickel-titanium rotary files with different geometric characteristics", J Endod, 37, pp.1283~1286 (2011)
- Yao JH, "Cyclic fatigue of three types of rotary nickel-titanium files in a dynamic model", J Endod, 32, pp.55~57 (2006)
- Li UM, "Cyclic fatigue of endodontic nickel titanium rotary instruments: static and dynamic tests", J Endod, 28, pp.448~451 (2002)
- Ray JJ, "Cyclic fatigue of EndoSequence and K3 rotary files in a dynamic model", J Endod, 33, pp.1469~1472 (2007)
- Cheung GS, "Does electropolishing improve the low-cycle fatigue behavior of a nickel-titanium rotary instrument in hypochlorite?", J Endod, 33, pp.1217~1221 (2007)
- Kim HC, "Cyclic fatigue and fracture characteristics of ground and twisted nickel-titanium rotary files", J Endod, 36, pp.147~152 (2010)
- Kim BH, "Effect from surface treatment of nickel-titanium rotary files on the fracture resistance", Scanning, 37, pp.82~87 (2015)
- Anderson ME, "Fracture resistance of electropolished rotary nickel-titanium endodontic instruments", J Endod, 33, pp.1212~1216 (2007)