Comparison of light-transmittance in dental tissues and dental composite restorations using incremental layering build-up with varying enamel resin layer thickness
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to 16 J/cm2 with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the supra-nanofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.
Abstract
Objectives To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to 16 J/cm2 with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the supra-nanofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.
참고문헌 (23)
- da Costa J, "Comparison of various resin composite shades and layering technique with a shade guide", J Esthet Restor Dent, 22, pp.114~124 (2010)[DOI]
- Carney MN, "Appearance differences between lots and brands of similar shade designations of dental composite resins", J Esthet Restor Dent, 29, pp.E6~E14 (2017)[DOI]
- Mikhail SS, "Optical characteristics of contemporary dental composite resin materials", J Dent, 41, pp.771~778 (2013)[DOI]
- Mikhail SS, "Confirmation of theoretical colour predictions for layering dental composite materials", J Dent, 42, pp.419~424 (2014)[DOI]
- Khashayar G, "The influence of varying layer thickness on the color predictability of two different composite layering concepts", Dent Mater, 30, pp.493~498 (2014)[DOI]
- Meng Z, "Measurement of the refractive index of human teeth by optical coherence tomography", J Biomed Opt, 14, pp.034010~ (2009)[DOI]
- Pop-Ciutrila IS, "Dentin translucency and color evaluation in human incisors, canines, and molars", J Prosthet Dent, 115, pp.475~481 (2016)[DOI]
- Arikawa H, "Effect of filler properties in composite resins on light transmittance characteristics and color", Dent Mater J, 26, pp.38~44 (2007)[DOI]
- Lee YK, "Influence of scattering", absorption characteristics on the color of resin composites, 2007, pp.23, 124~131
- [URL]
- [URL]
- [URL]
- [URL]
- Beun S, "Characterization of nanofilled compared to universal and microfilled composites", Dent Mater, 23, pp.51~59 (2007)[DOI]
- Pahlevan A, "Enamel thickness after preparation of tooth for porcelain laminate", J Dent (Tehran), 11, pp.428~432 (2014)
- Burki Z, "A randomised controlled trial to investigate the effects of dehydration on tooth colour", J Dent, 41, pp.250~257 (2013)[DOI]
- Perez MM, "Optical properties of supra-nano spherical filled resin composites compared to nanofilled, nano-hybrid and micro-hybrid composites", Dent Mater J, 35, pp.353~359 (2016)[DOI]
- Randolph LD, "Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties", Dent Mater, 32, pp.1586~1599 (2016)[DOI]
- de Oliveira DC, "Effect of nanofiller loading on cure efficiency and potential color change of model composites", J Esthet Restor Dent, 28, pp.171~177 (2016)[DOI]
- Curtis AR, "The mechanical properties of nanofilled resin-based composites: characterizing discrete fillerparticles and agglomerates using a micromanipulation technique", Dent Mater, 25, pp.180~187 (2009)[DOI]
- Azzopardi N, "Effect of resin matrix composition on the translucency of experimental dental composite resins", Dent Mater, 25, pp.1564~1568 (2009)[DOI]
- Lee YK, "Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites", Dent Mater, 24, pp.1243~1247 (2008)[DOI]
- Shortall AC, "Refractive index mismatch and monomer reactivity influence composite curing depth", J Dent Res, 87, pp.84~88 (2008)[DOI]