In vitro comparison of the cyclic fatigue resistance of HyFlex EDM, One G, and ProGlider nickel titanium glide path instruments in single and double curvature canals
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Objectives: It was aimed to compare the cyclic fatigue resistances of ProGlider (PG), One G (OG), and HyFlex EDM (HEDM) nickel titanium glide path files in single- and double-curved artificial canals. Materials and Methods: 40 PG (16/0.02), 40 OG (14/0.03), and 40 HEDM (10/0.05) single-file glide path files were used in the present study. Sixty files were subjected to cyclic fatigue test by using double-curved canals and 60 files by using single-curved canal (n = 20). The number of cycles to fracture (NCF) was calculated and the length of the fractured fragment (FL) was determined by a digital micro-caliper. Twelve pieces of fractured files were examined with scanning electron microscope to determine fracture types of the files (n = 2). The NCF and the FL data were analyzed using one-way analysis of variance and post hoc Tukey test using SPSS 21 software (p < 0.05). Results: In all of the groups, NCF values were significantly lower in double-curved canals when compared to single-curved canals (p < 0.05). For both of single- and double-curved canals, NCF values of HEDM group in apical and coronal curvatures were found to be significantly higher than NCF values of PG and OG groups (p < 0.05). In both of single- and double-curved canals, NCF value of PG group was found significantly higher than OG group (p < 0.05). Conclusions: Within the limitations of this study, HEDM glide path files were found to have the highest cyclic fatigue resistance in both of single- and double-curved canals.
Abstract
Objectives: It was aimed to compare the cyclic fatigue resistances of ProGlider (PG), One G (OG), and HyFlex EDM (HEDM) nickel titanium glide path files in single- and double-curved artificial canals. Materials and Methods: 40 PG (16/0.02), 40 OG (14/0.03), and 40 HEDM (10/0.05) single-file glide path files were used in the present study. Sixty files were subjected to cyclic fatigue test by using double-curved canals and 60 files by using single-curved canal (n = 20). The number of cycles to fracture (NCF) was calculated and the length of the fractured fragment (FL) was determined by a digital micro-caliper. Twelve pieces of fractured files were examined with scanning electron microscope to determine fracture types of the files (n = 2). The NCF and the FL data were analyzed using one-way analysis of variance and post hoc Tukey test using SPSS 21 software (p < 0.05). Results: In all of the groups, NCF values were significantly lower in double-curved canals when compared to single-curved canals (p < 0.05). For both of single- and double-curved canals, NCF values of HEDM group in apical and coronal curvatures were found to be significantly higher than NCF values of PG and OG groups (p < 0.05). In both of single- and double-curved canals, NCF value of PG group was found significantly higher than OG group (p < 0.05). Conclusions: Within the limitations of this study, HEDM glide path files were found to have the highest cyclic fatigue resistance in both of single- and double-curved canals.
참고문헌 (29)
- Peters OA, "Current challenges and concepts in the preparation of root canal systems: a review", J Endod, 30, pp.559~567 (2004)
- Walia HM, "An initial investigation of the bending and torsional properties of Nitinol root canal files", J Endod, 14, pp.346~351 (1988)
- Sattapan B, "Defects in rotary nickel-titanium files after clinical use", J Endod, 26, pp.161~165 (2000)
- Cheung GS, "Instrument fracture: mechanisms, removal of fragments, and clinical outcomes", Endod Topics, 16, pp.1~26 (2007)
- Patiño PV, "The influence of a manual glide path on the separation rate of NiTi rotary instruments", J Endod, 31, pp.114~116 (2005)
- 하정홍, "Influence of glide path on the screw-in effect and torque of nickel-titanium rotary files in simulated resin root canals", Restorative Dentistry and Endodontics, 37(4), pp.215~219 (2012), 대한치과보존학회[DOI]
- Gambarini G, "Fatigue resistance of engine-driven rotary nickel-titanium instruments produced by new manufacturing methods", J Endod, 34, pp.1003~1005 (2008)
- "Dentsply: Pro·glider™"[URL]
- "Micro Mega: One G"[URL]
- "Coltene: HyFlex® EDM"[URL]
- Al-Sudani D, "Cyclic fatigue of nickel-titanium rotary instruments in a double (S-shaped) simulated curvature", J Endod, 38, pp.987~989 (2012)
- Neelakantan P, "Cyclic fatigue of two different single files with varying kinematics in a simulated double-curved canal", J Investig Clin Dent, 7, pp.272~277 (2016)
- Topçuoğlu HS, "Laboratory comparison of cyclic fatigue resistance of WaveOne Gold, Reciproc and WaveOne files in canals with a double curvature", Int Endod J, 50, pp.713~717 (2017)
- Berutti E, "Use of nickel-titanium rotary PathFile to create the glide path: comparison with manual preflaring in simulated root canals", J Endod, 35, pp.408~412 (2009)
- Pruett JP, "Cyclic fatigue testing of nickel-titanium endodontic instruments", J Endod, 23, pp.77~85 (1997)
- Plotino G, "A comparison of cyclic fatigue between used and new Mtwo Ni-Ti rotary instruments", Int Endod J, 39, pp.716~723 (2006)
- Topçuoğlu HS, "In vitro comparison of cyclic fatigue resistance of ProTaper Next, HyFlex CM, OneShape, and ProTaper Universal Instruments in a canal with a double curvature", J Endod, 42, pp.969~971 (2016)
- Versluis A, "Flexural stiffness and stresses in nickel-titanium rotary files for various pitch and cross-sectional geometries", J Endod, 38, pp.1399~1403 (2012)
- Arias A, "Influence of clinical usage of GT and GTX files on cyclic fatigue resistance", Int Endod J, 47, pp.257~263 (2014)
- Frick CP, "Thermal processing of polycrystalline NiTi shape memory alloys", Mater Sci Eng A Struct Mater, 405, pp.34~49 (2005)
- Braga LC, "Impact of heat treatments on the fatigue resistance of different rotary nickel-titanium instruments", J Endod, 40, pp.1494~1497 (2014)
- Capar ID, "Comparison of the cyclic fatigue resistance of 5 different rotary pathfinding instruments made of conventional nickel-titanium wire, M-wire, and controlled memory wire", J Endod, 41, pp.535~538 (2015)
- Capar ID, "Comparison of cyclic fatigue resistance of nickel-titanium coronal flaring instruments", J Endod, 40, pp.1182~1185 (2014)
- Plotino G, "Fatigue resistance of rotary instruments manufactured using different nickel-titanium alloys: a comparative study", Odontology, 102, pp.31~35 (2014)
- Pongione G, "Flexibility and resistance to cyclic fatigue of endodontic instruments made with different nickel-titanium alloys: a comparative test", Ann Stomatol (Roma), 3, pp.119~122 (2012)
- Capar ID, "Comparison of cyclic fatigue resistance of novel nickel-titanium rotary instruments", Aust Endod J, 41, pp.24~28 (2015)
- Uslu G, "Comparison of cyclic fatigue resistance of ProGlider and One G glide path files", J Endod, 42, pp.1555~1558 (2016)
- Johnson E, "Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25", .04 rotary instruments, 2008, pp.34, 1406~1409
- Shen Y, "Fatigue resistance of a 3-dimensional conforming nickel-titanium rotary instrument in double curvatures", J Endod, 42, pp.961~964 (2016)