Chitosan/hydroxyapatite composite coatings on porous Ti6Al4V titanium implants: in vitro and in vivo studies
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: Titanium implants are widely used in the treatment of dentition defects; however, due to problems such as osseointegration failure, peri-implant bone resorption, and periimplant inflammation, their application is subject to certain restrictions. The surface modification of titanium implants can improve the implant success rate and meet the needs of clinical applications. The goal of this study was to evaluate the effect of the use of porous titanium with a chitosan/hydroxyapatite coating on osseointegration. Methods: Titanium implants with a dense core and a porous outer structure were prepared using a computer-aided design model and selective laser sintering technology, with a fabricated chitosan/hydroxyapatite composite coating on their surfaces. In vivo and in vitro experiments were used to assess osteogenesis. Results: The quasi-elastic gradient and compressive strength of porous titanium implants were observed to decrease as the porosity increased. The in vitro experiments demonstrated that, the porous titanium implants had no biological toxicity; additionally, the porous structure was shown to be superior to dense titanium with regard to facilitating the adhesion and proliferation of osteoblast-like MC3T3-E1 cells. The in vivo experimental results also showed that the porous structure was beneficial, as bone tissue could grow into the pores, thereby exhibiting good osseointegration. Conclusions: Porous titanium with a chitosan/hydroxyapatite coating promoted MC3T3-E1 cell proliferation and differentiation, and also improved osseointegration in vitro. This study has meaningful implications for research into ways of improving the surface structures of implants and promoting implant osseointegration.
Abstract
Purpose: Titanium implants are widely used in the treatment of dentition defects; however, due to problems such as osseointegration failure, peri-implant bone resorption, and periimplant inflammation, their application is subject to certain restrictions. The surface modification of titanium implants can improve the implant success rate and meet the needs of clinical applications. The goal of this study was to evaluate the effect of the use of porous titanium with a chitosan/hydroxyapatite coating on osseointegration. Methods: Titanium implants with a dense core and a porous outer structure were prepared using a computer-aided design model and selective laser sintering technology, with a fabricated chitosan/hydroxyapatite composite coating on their surfaces. In vivo and in vitro experiments were used to assess osteogenesis. Results: The quasi-elastic gradient and compressive strength of porous titanium implants were observed to decrease as the porosity increased. The in vitro experiments demonstrated that, the porous titanium implants had no biological toxicity; additionally, the porous structure was shown to be superior to dense titanium with regard to facilitating the adhesion and proliferation of osteoblast-like MC3T3-E1 cells. The in vivo experimental results also showed that the porous structure was beneficial, as bone tissue could grow into the pores, thereby exhibiting good osseointegration. Conclusions: Porous titanium with a chitosan/hydroxyapatite coating promoted MC3T3-E1 cell proliferation and differentiation, and also improved osseointegration in vitro. This study has meaningful implications for research into ways of improving the surface structures of implants and promoting implant osseointegration.
참고문헌 (29)
- Wu SL, "Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants", Surf Coat Tech, 233, pp.13~26 (2013)
- Traini T, "Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants", Dent Mater, 24, pp.1525~1533 (2008)
- Cook SD, "The influence of implant elastic modulus on the stress distribution around LTI carbon and aluminum oxide dental implants", J Biomed Mater Res, 15, pp.879~887 (1981)
- Zhao D, "Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material", J Mech Behav Biomed Mater, 28, pp.171~182 (2013)
- Nie L, "β-Type Zr-Nb-Ti biomedical materials with high plasticity and low modulus for hard tissue replacements", J Mech Behav Biomed Mater, 29, pp.1~6 (2014)
- Jorgensen DJ, "Structure and mechanical properties of Ti-6Al-4V with a replicated network of elongated pores", Acta Mater, 59, pp.640~650 (2011)
- Li F, "Fabrication, pore structure and compressive behavior of anisotropic porous titanium for human trabecular bone implant applications", J Mech Behav Biomed Mater, 46, pp.104~114 (2015)
- El-Hajje A, "Physical and mechanical characterisation of 3D-printed porous titanium for biomedical applications", J Mater Sci Mater Med, 25, pp.2471~2480 (2014)
- Torres Y, "Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions", Mater Des, 63, pp.316~324 (2014)
- Torres Y, "Design, processing and characterization of titanium with radial graded porosity for bone implants", Mater Des, 110, pp.179~187 (2016)
- Luthringer BJ, "Production, characterisation, and cytocompatibility of porous titanium-based particulate scaffolds", J Mater Sci Mater Med, 24, pp.2337~2358 (2013)
- Ninomiya JT, "Porous ongrowth surfaces alter osteoblast maturation and mineralization", J Biomed Mater Res A, 103, pp.276~281 (2015)
- de Vasconcellos LM, "Novel production method of porous surface Ti samples for biomedical application", J Mater Sci Mater Med, 23, pp.357~364 (2012)
- Wang GQ, "Titanium based hydroxyapatite", chitosan coating prepared by microarc oxidation process and its biological characteristics, 2013, pp.42, 2586~2589
- Cheng A, "Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner", Biofabrication, 6, pp.045007~ (2014)
- Wieding J, "The effect of structural design on mechanical properties and cellular response of additive manufactured titanium scaffolds", Materials(Basel), 5, pp.1336~1347 (2012)
- Van der Stok J, "Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects", J Orthop Res, 31, pp.792~799 (2013)
- Beaman JJ, "Selective laser sintering with assisted powder handling", ~ (1990)
- Dillon PM, "Adenoid cystic carcinoma: a review of recent advances, molecular targets, and clinical trials", Head Neck, 38, pp.620~627 (2016)
- Kim BS, "Growth and osteogenic differentiation of alveolar human bone marrow-derived mesenchymal stem cells on chitosan", hydroxyapatite composite fabric, 2013, pp.101, 1550~1558
- Xie B, "Geniposide alleviates glucocorticoid-induced inhibition of osteogenic differentiation in MC3T3-E1 cells by ERK pathway", Front Pharmacol, 10, pp.411~ (2019)
- Suzuki H, "Regulation of MC3T3-E1 differentiation by actin cytoskeleton through lipid mediators reflecting the cell differentiation stage", Biochem Biophys Res Commun, 514, pp.393~400 (2019)
- Wei T, "Verification of osteoblast differentiation on airborneparticle abrasion, large-grit, acid-etched surface of titanium implants regulated by yes-associated protein and transcriptional coactivator with PDZ-binding motif", J Oral Sci, 61, pp.431~440 (2019)
- Pang X, "Electrophoretic deposition of composite hydroxyapatite-chitosan coatings", Mater Charact, 58, pp.339~348 (2007)
- Zaharin HA, "Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds", Materials(Basel), 11, pp.2402~ (2018)
- Cheng A, "Enhanced osteoblast response to porosity and resolution of additively manufactured Ti-6Al-4V constructs with trabeculae-inspired porosity", 3D Print Addit Manuf, 3, pp.10~21 (2016)
- Pattanayak DK, "Bioactive Ti metal analogous to human cancellous bone : Fabrication by selective laser melting and chemical treatments", Acta Biomater, 7, pp.1398~1406 (2011)
- Ding R, "Selective Laser Sintering-produced porous titanium alloy scaffold for bone tissue engineering", Zhonghua Yi Xue Za Zhi, 94, pp.1499~1502 (2014)
- Muñoz S, "On the influence of space holder in the development of porous titanium implants: mechanical, computational and biological evaluation", Mater Charact, 108, pp.68~78 (2015)