Cell response to a newly developed Ti-10Ta-10Nb alloy and its sputtered nanoscale coating
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
STATEMENT OF PROBLEM. The success of titanium implants is due to osseointegration or the direct contact of the implant surface and bone without a fibrous connective tissue interface. PURPOSE. The purpose of this study was to evaluate the osteoblast precursor response to titanium - 10 tantalum - 10 niobium (Ti-Ta-Nb) alloy and its sputtered coating. MATERIAL AND METHODS. Ti-Ta-Nb coatings were sputtered onto the Ti-Ta-Nb disks. Ti6-Al-4V alloy disks were used as controls. An osteoblast precursor cell line, were used to evaluate the cell responses to the 3 groups. Cell attachment was measured using coulter counter and the cell morphology during attachment period was observed using fluorescent microscopy. Cell culture was performed at 4, 8, 12 and 16 days. RESULTS. The sputtered Ti-Ta-Nb coatings consisted of dense nanoscale grains in the range of 30 to 100 nm with alpha-Ti crystal structure. The Ti-Ta-Nb disks and its sputtered nanoscale coatings exhibited greater hydrophilicity and rougher surfaces compared to the Ti-6Al-4V disks. The sputtered nanoscale Ti-Ta-Nb coatings exhibited significantly greater cell attachment compared to Ti-6Al-4V and Ti-Ta-Nb disks. Nanoscale Ti-Ta-Nb coatings exhibited significantly greater ALP specific activity and total protein production compared to the other 2 groups CONCLUSIONS. It was concluded that nanoscale Ti-Ta-Nb coatings enhance cell adhesion. In addition, Ti-Ta-Nb alloy and its nanoscale coatings enhanced osteoblast differentiation, but did not support osteoblast precursor proliferation compared to Ti-6Al-4V. These results indicate that the new developed Ti-Ta-Nb alloy and its nanoscale Ti-Ta-Nb coatings may be useful as an implant material.
Abstract
STATEMENT OF PROBLEM. The success of titanium implants is due to osseointegration or the direct contact of the implant surface and bone without a fibrous connective tissue interface. PURPOSE. The purpose of this study was to evaluate the osteoblast precursor response to titanium - 10 tantalum - 10 niobium (Ti-Ta-Nb) alloy and its sputtered coating. MATERIAL AND METHODS. Ti-Ta-Nb coatings were sputtered onto the Ti-Ta-Nb disks. Ti6-Al-4V alloy disks were used as controls. An osteoblast precursor cell line, were used to evaluate the cell responses to the 3 groups. Cell attachment was measured using coulter counter and the cell morphology during attachment period was observed using fluorescent microscopy. Cell culture was performed at 4, 8, 12 and 16 days. RESULTS. The sputtered Ti-Ta-Nb coatings consisted of dense nanoscale grains in the range of 30 to 100 nm with alpha-Ti crystal structure. The Ti-Ta-Nb disks and its sputtered nanoscale coatings exhibited greater hydrophilicity and rougher surfaces compared to the Ti-6Al-4V disks. The sputtered nanoscale Ti-Ta-Nb coatings exhibited significantly greater cell attachment compared to Ti-6Al-4V and Ti-Ta-Nb disks. Nanoscale Ti-Ta-Nb coatings exhibited significantly greater ALP specific activity and total protein production compared to the other 2 groups CONCLUSIONS. It was concluded that nanoscale Ti-Ta-Nb coatings enhance cell adhesion. In addition, Ti-Ta-Nb alloy and its nanoscale coatings enhanced osteoblast differentiation, but did not support osteoblast precursor proliferation compared to Ti-6Al-4V. These results indicate that the new developed Ti-Ta-Nb alloy and its nanoscale Ti-Ta-Nb coatings may be useful as an implant material.
참고문헌 (27)
- Albrektsson T, "Bone-metal interface in osseointegration", J Prosthet Dent, 57, pp.597~607 (1987)
- Kasemo B, "Biocompatibility of titanium implants: surface science aspects", J Prosthet Dent, 49, pp.832~837 (1983)
- Linter CM, "Neuropsychiatric aspects of trace elements", Br J Hosp Med, 34, pp.361~365 (1985)
- Srinivasan DP, "Trace elements in psychiatric illness", Br J Hosp Med, 32, pp.77~79 (1984)
- Levine S, "The management of resistant depression", Acta Psychiatr Belg, 86, pp.141~151 (1986)
- Li SJ, "Fatigue characteristics of bioactive glass-ceramic-coated Ti-29Nb-13Ta- 4.6Zr for biomedical application", Biomaterials, 25, pp.3369~3378 (2004)
- Niinomi M, "Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti-29Nb-13Ta-4.6Zr", Biomaterials, 24, pp.2673~2683 (2003)
- Black J, "Biological performance of tantalum", Clin Mater, 16, pp.167~173 (1994)
- Meenaghan MA, "Tissue response to surface-treated tantalum implants: preliminary observations in primates", J Biomed Mater Res, 13, pp.631~643 (1979)
- Cohen R, "A porous tantalum trabecular metal: basic science", Am J Orthop, 31, pp.216~217 (2002)
- "Dtsch Stomatol", 1991, 407~410
- Johansson CB, "Qualitative interfacial study between bone and tantalum, niobium or commercially pure titanium", Biomaterials, 11, pp.277~280 (1990)
- Breme J, "Comparison of titanium-tantalum and titanium- niobium alloys for application as dental implants", Int J Oral Maxillofac Implants, 4, pp.113~118 (1989)
- Zitter H, "The electrochemical behavior of metallic implant materials as an indicator of their biocompatibility", J Biomed Mater Res, 21, pp.881~896 (1987)
- "Z Orthop Ihre Grenzgeb", 1984, 349~355
- Fontaine AB, "Polymeric surface modifications of tantalum stents", J Endovasc Surg, 3, pp.276~283 (1996)
- Tepe G, "Covered stents for prevention of restenosis. Experimental and clinical results with different stent designs", Invest Radiol, 31, pp.223~229 (1996)
- Crochet D, "Plasma treatment effects on the tantalum Strecker stent implanted in femoral arteries of sheep", Cardiovasc Intervent Radiol, 17, pp.285~291 (1994)
- Z Exp Chir Transplant Kunstliche Organe, "1989", 22
- Shimko DA, "Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds", J Biomed Mater Res B Appl Biomater, 73, pp.315~324 (2005)
- Zardiackas LD, "Structure, metallurgy, and mechanical properties of a porous tantalum foam", J Biomed Mater Res, 58, pp.180~187 (2001)
- Hacking SA, "Fibrous tissue ingrowth and attachment to porous tantalum", J Biomed Mater Res, 52, pp.631~638 (2000)
- Bagley J, "Extended culture of multipotent hematopoietic progenitors without cytokine augmentation in a novel three-dimensional device", Exp Hematol, 27, pp.496~504 (1999)
- Webster TJ, "Osteoblast adhesion on nanophase ceramics", Biomaterials, 20, pp.1221~1227 (1999)
- Shah AK, "High-resolution morphometric analysis of human osteoblastic cell adhesion on clinically relevant orthopedic alloys", Bone, 24, pp.499~506 (1999)
- Berube P, "The effect of sputtered calcium phosphate coatings of different crystallinity on osteoblast differentiation", J Periodontol, 76, pp.1697~1709 (2005)
- Kartsogiannis V, "Cell lines and primary cell cultures in the study of bone cell biology", Mol Cell Endocrinol, 228, pp.79~102 (2004)