Osteoblastic behavior to zirconium coating on Ti-6Al-4V alloy
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS. The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy were evaluated. Electrochemical test was performed to evaluate the corrosion behavior. Cell proliferation, alkaline phosphatase (ALP) activity and gene expression of mineralized matrix markers were measured. RESULTS. SEM and EDS analysis showed that zirconium deposition was performed successfully on Ti-6Al-4V alloy substrate. Ti-6Al-4V group and Zr-coating group showed no significant difference in surface roughness (P>.05). Surface energy was significantly higher in Zr-coating group than in Ti-6Al-4V group (P<.05). No difference in cell morphology was observed between Ti-6Al-4V group and Zr-coating group. Cell proliferation was higher in Zr-coating group than Ti-6Al-4V group at 1, 3 and 5 days (P<.05). Zr-coating group showed higher ALP activity level than Ti-6Al-4V group (P<.05). The mRNA expressions of bone sialoprotein (BSP) and osteocalcin (OCN) on Zr-coating group increased approximately 1.2-fold and 2.1-fold respectively, compared to that of Ti-6Al-4V group. CONCLUSION. These results suggest that zirconium coating on Ti-6Al-4V alloy could enhance the early osteoblast responses. This property could make non-toxic metal coatings on Ti-6Al-4V alloy suitable for orthopedic and dental implants.
Abstract
PURPOSE. The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS. The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy were evaluated. Electrochemical test was performed to evaluate the corrosion behavior. Cell proliferation, alkaline phosphatase (ALP) activity and gene expression of mineralized matrix markers were measured. RESULTS. SEM and EDS analysis showed that zirconium deposition was performed successfully on Ti-6Al-4V alloy substrate. Ti-6Al-4V group and Zr-coating group showed no significant difference in surface roughness (P>.05). Surface energy was significantly higher in Zr-coating group than in Ti-6Al-4V group (P<.05). No difference in cell morphology was observed between Ti-6Al-4V group and Zr-coating group. Cell proliferation was higher in Zr-coating group than Ti-6Al-4V group at 1, 3 and 5 days (P<.05). Zr-coating group showed higher ALP activity level than Ti-6Al-4V group (P<.05). The mRNA expressions of bone sialoprotein (BSP) and osteocalcin (OCN) on Zr-coating group increased approximately 1.2-fold and 2.1-fold respectively, compared to that of Ti-6Al-4V group. CONCLUSION. These results suggest that zirconium coating on Ti-6Al-4V alloy could enhance the early osteoblast responses. This property could make non-toxic metal coatings on Ti-6Al-4V alloy suitable for orthopedic and dental implants.
참고문헌 (33)
- Park JB, "Biomaterials: an introduction", pp.89~92 (1992), Plenum Press
- Oshida Y., "Bioscience and bioenginerring of titanium materials", pp.11~24 (2007), Elsevier Press
- Khan MA., "In-vitro corrosion and wear of titanium alloys in the biological environment", Biomaterials, 17, pp.2117~2126 (1996)
- Khan MA., "Conjoint corrosion and wear in titanium alloys", Biomaterials, 20, pp.765~772 (1999)
- Matono Y., "Corrosion behavior of pure titanium and titanium alloys in various concentrations of Acidulated Phosphate Fluoride(APF)solutions", Dent Mater J, 25, pp.104~112 (2006)
- Okazaki Y., "Comparison of metal concentrations in rat tibia tissues with various metallic implants", Biomaterials, 25, pp.5913~5920 (2004)
- Okazaki Y., "Comparison of metal release from various metallic biomaterials in vitro", Biomaterials, 26, pp.11~21 (2005)
- Gomes CC., "Assessment of the genetic risks of a metallic alloy used in medical implants", Genet Mol Biol, 34, pp.116~121 (2011)
- Liu C., "Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti-6Al-4V artificial hip joints", Surf Coat Technol, 163-164, pp.597~604 (2003)
- Arnould C., "Titanium modified with layer-by-layer sol-gel tantalum oxide and an organodiphosphonic acid : a coating for hydroxyapatite growth", J Colloid Interface Sci, 336, pp.497~503 (2009)
- Qian MA., "Effect of soluble and insoluble zirconium on the grain refinement of magnesium alloys", Mater Sci Forum, 419-422, pp.593~598 (2003)
- Samuel S., "Corrosion resistance and in vitro response of laser-deposited Ti-Nb-Zr-Ta alloys for orthopedic implant applications", J Biomed Mater Res A, 94, pp.1251~1256 (2010)
- Rosalbino F., "Study of the in vitro corrosion behavior and biocompatibility of Zr-2. 5Nb and Zr-1. 5Nb-1Ta(at%)crystalline alloys", J Mater Sci Mater Med, 22, pp.1293~1302 (2011)
- Duygulu O., "Diffusion bonding of magnesium, zirconium and titanium as implant material", Mater Sci Forum, 546-549, pp.417~420 (2007)
- Gómez-Florit M., "Human gingival fibroblasts function is stimulated on machined hydrided titanium zirconium dental implants", J Dent, 42, pp.30~38 (2014)
- Kurella A., "Laser induced multi-scale textured zirconia coating on Ti-6Al-4V", J Mater Sci Mater Med, 17, pp.565~572 (2006)
- Zhang S., "Adhesion, proliferation and differentiation of osteoblasts on zirconia films prepared by cathodic arc deposition", Biomed Mater Eng, 23, pp.373~385 (2013)
- Sollazzo V., "Zirconium oxide coating improves implant osseointegration in vivo", Dent Mater, 24, pp.357~361 (2008)
- Yang Y., "A review on calcium phosphate coatings produced using a sputtering process--an alternative to plasma spraying", Biomaterials, 26, pp.327~337 (2005)
- Nelea V., "Microstructure and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering", Surf Coat Technol, 173, pp.315~322 (2003)
- Wan T., "RF-magnetron sputtering technique for producing hydroxyapatite coating film on various substrates", Biomed Mater Eng, 17, pp.291~297 (2007)
- van Oss CJ., "Monopolar surfaces", Adv Colloid Interface Sci, 28, pp.35~64 (1987)
- Rajaraman R., "A scanning electron microscope study of cell adhesion and spreading in vitro", Exp Cell Res, 88, pp.327~339 (1974)
- Hanawa T., "Biofunctional hybride of titanium with polymers", Mater Sci Forum, 539-543, pp.563~566 (2007)
- Kawahara H., "In vitro study on bone formation and surface topography from the standpoint of biomechanics", J Mater Sci Mater Med, 15, pp.1297~1307 (2004)
- Lincks J., "Response of MG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition", Biomaterials, 19, pp.2219~2232 (1998)
- Kawahara H., "In vitro study on bone formation and surface topography from the standpoint of biomechanics", J Mater Sci Mater Med, 15, pp.1297~1307 (2004)
- Pessková V., "The influence of implant surface properties on cell adhesion and proliferation", J Mater Sci Mater Med, 18, pp.465~473 (2007)
- Gerstenfeld LC., "Expression of differentiated function by mineralizing cultures of chicken osteoblasts", Dev Biol, 122, pp.49~60 (1987)
- Ganss B., "Bone sialoprotein", Crit Rev Oral Biol Med, 10, pp.79~98 (1999)
- Hunter GK., "Nucleation of hydroxyapatite by bone sialoprotein", Proc Natl Acad Sci USA, 90, pp.8562~8565 (1993)
- Paredes R., "The Runx2 transcription factor plays a key role in the 1alpha,25-dihydroxy Vitamin D3- dependent upregulation of the rat osteocalcin (OC) gene expression in osteoblastic cells", J Steroid Biochem Mol Biol, 89-90, pp.269~271 (2004)
- Bacakova L1., "Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants", Biotechnol Adv, 29, pp.739~767 (2011)