The effect of preheating resin composites on surface hardness: a systematic review and meta-analysis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives This paper presents a systematic review and meta-analysis of the effect of preheating on the hardness of nanofilled, nanoceramic, nanohybrid, and microhybrid resin composites. Materials and Methods An electronic search of papers on MEDLINE/PubMed, ScienceDirect, and EBSCOhost was performed. Only in vitro studies were included. Non-English studies, case reports, clinical trials, and review articles were excluded. A meta-analysis of the reviewed studies was conducted to quantify differences in the microhardness of the Z250 microhybrid resin composite using the Comprehensive Meta-Analysis software. Results Only 13 studies met the inclusion criteria for this systematic review. The meta-analysis showed that there were significant differences between the non-preheated and preheated modes for both the top and bottom surfaces of the specimens (p < 0.05). The microhardness of the Z250 resin composite on the top surface in the preheated mode (78.1 ± 2.9) was higher than in the non-preheated mode (67.4 ± 4.0; p < 0.001). Moreover, the microhardness of the Z250 resin composite on the bottom surface in the preheated mode (71.8 ± 3.8) was higher than in the non-preheated mode (57.5 ± 5.7, p < 0.001). Conclusions Although the results reported in the reviewed studies showed great variability, sufficient scientific evidence was found to support the hypothesis that preheating can improve the hardness of resin composites.
Abstract
Objectives This paper presents a systematic review and meta-analysis of the effect of preheating on the hardness of nanofilled, nanoceramic, nanohybrid, and microhybrid resin composites. Materials and Methods An electronic search of papers on MEDLINE/PubMed, ScienceDirect, and EBSCOhost was performed. Only in vitro studies were included. Non-English studies, case reports, clinical trials, and review articles were excluded. A meta-analysis of the reviewed studies was conducted to quantify differences in the microhardness of the Z250 microhybrid resin composite using the Comprehensive Meta-Analysis software. Results Only 13 studies met the inclusion criteria for this systematic review. The meta-analysis showed that there were significant differences between the non-preheated and preheated modes for both the top and bottom surfaces of the specimens (p < 0.05). The microhardness of the Z250 resin composite on the top surface in the preheated mode (78.1 ± 2.9) was higher than in the non-preheated mode (67.4 ± 4.0; p < 0.001). Moreover, the microhardness of the Z250 resin composite on the bottom surface in the preheated mode (71.8 ± 3.8) was higher than in the non-preheated mode (57.5 ± 5.7, p < 0.001). Conclusions Although the results reported in the reviewed studies showed great variability, sufficient scientific evidence was found to support the hypothesis that preheating can improve the hardness of resin composites.
참고문헌 (39)
- McGlone P, "Evidence-based dentistry : an overview of the challenges in changing professional practice", Br Dent J, 190, pp.636~639 (2001)
- Gilbert TT, "How to evaluate and implement clinical policies", Fam Pract Manag, 6, pp.28~33 (1999)
- Ilie N, "Low-shrinkage composite for dental application", Dent Mater J, 26, pp.149~155 (2007)
- Ferracane JL, "Resin composite--state of the art", Dent Mater, 27, pp.29~38 (2011)
- Van Meerbeek B, "The clinical performance of adhesives", J Dent, 26, pp.1~20 (1998)
- Browne RM, "Microbial microleakage and pulpal inflammation : a review", Endod Dent Traumatol, 2, pp.177~183 (1986)
- Clelland NL, "Relative wear of flowable and highly filled composite", J Prosthet Dent, 93, pp.153~157 (2005)
- Lucey S, "Effect of pre-heating on the viscosity and microhardness of a resin composite", J Oral Rehabil, 37, pp.278~282 (2010)
- Deb S, "Pre-warming of dental composites", Dent Mater, 27, pp.e51~e59 (2011)
- Wagner WC, "Effect of pre-heating resin composite on restoration microleakage", Oper Dent, 33, pp.72~78 (2008)
- Elsayad I, "Cuspal movement and gap formation in premolars restored with preheated resin composite", Oper Dent, 34, pp.725~731 (2009)
- Fróes-Salgado NR, "Composite pre-heating : effects on marginal adaptation, degree of conversion and mechanical properties", Dent Mater, 26, pp.908~914 (2010)
- Daronch M, "Monomer conversion of pre-heated composite", J Dent Res, 84, pp.663~667 (2005)
- El-Korashy DI, "Post-gel shrinkage strain and degree of conversion of preheated resin composite cured using different regimens", Oper Dent, 35, pp.172~179 (2010)
- Sarrett DC, "Clinical challenges and the relevance of materials testing for posterior composite restorations", Dent Mater, 21, pp.9~20 (2005)
- Muñoz CA, "Effect of pre-heating on depth of cure and surface hardness of light-polymerized resin composites", Am J Dent, 21, pp.215~222 (2008)
- Yan YL, "Changes in degree of conversion and microhardness of dental resin cements", Oper Dent, 35, pp.203~210 (2010)
- Ciccone-Nogueira JC, "Microhardness of composite resins at different depths varying the post-irradiation time", J Appl Oral Sci, 15, pp.305~309 (2007)
- Tantbirojn D, "Hardness and postgel shrinkage of preheated composites", Quintessence Int, 42, pp.e51~e59 (2011)
- Yap AU, "Effects of in-office tooth whiteners on hardness of tooth-colored restoratives", Oper Dent, 27, pp.137~141 (2002)
- Osternack FH, "Effects of preheating and precooling on the hardness and shrinkage of a composite resin cured with QTH and LED", Oper Dent, 38, pp.E1~E8 (2013)
- D'Amario M, "Influence of a repeated preheating procedure on mechanical properties of three resin composites", Oper Dent, 40, pp.181~189 (2015)
- Jafarzadeh Kashi TS, "Effect of preheating on the microhardness of nanohybrid resin-based composites", Front Biomed Techno, 2, pp.15~22 (2015)
- Theobaldo JD, "Effect of preheating and light-curing unit on physicochemical properties of a bulk fill composite", Clin Cosmet Investig Dent, 9, pp.39~43 (2017)
- Ayub KV, "Effect of preheating on microhardness and viscosity of 4 resin composites", J Can Dent Assoc, 80, pp.e12~ (2014)
- Torres CR, "Influence of pre-cure temperature on Vickers microhardness of resin composite", Int J Contemp Dent, 2, pp.41~45 (2011)
- Mohammadi N, "Effect of pre-heating on the mechanical properties of silorane-based and methacrylate-based composites", J Clin Exp Dent, 8, pp.e373~e378 (2016)
- Awliya WY, "The influence of temperature on the efficacy of polymerization of composite resin", J Contemp Dent Pract, 8, pp.9~16 (2007)
- Theodoridis M, "Effect of preheating and shade on surface microhardness of silorane-based composites", J Investig Clin Dent, 8, pp.e12204~ (2017)
- Dionysopoulos D, "Effect of temperature, curing time, and filler composition on surface microhardness of composite resins", J Conserv Dent, 18, pp.114~118 (2015)
- Borenstein M, "Introduction to meta-analysis" (2011), John Wiley & Sons
- Greenhalgh T, "Papers that summarise other papers(systematic reviews and meta-analyses)", BMJ, 315, pp.627~625 (1997)
- Linde K, "How objective are systematic reviews? Differences between reviews on complementary medicine", J R Soc Med, 96, pp.17~22 (2003)
- Trujillo M, "Use of near-IR to monitor the influence of external heating on dental composite photopolymerization", Dent Mater, 20, pp.766~777 (2004)
- Daronch M, "Polymerization kinetics of pre-heated composite", J Dent Res, 85, pp.38~43 (2006)
- Rueggeberg FA, "Effect of light intensity and exposure duration on cure of resin composite", Oper Dent, 19, pp.26~32 (1994)
- Prasanna N, "Degree of conversion and residual stress of preheated and room-temperature composites", Indian J Dent Res, 18, pp.173~176 (2007)
- Rueggeberg F, "Resin cure determination by polymerization shrinkage", Dent Mater, 11, pp.265~268 (1995)
- Kusgoz A, "Silorane-based composite : depth of cure, surface hardness, degree of conversion, and cervical microleakage in Class II cavities", J Esthet Restor Dent, 23, pp.324~335 (2011)