Influence of 10-MDP concentration on the adhesion and physical properties of self-adhesive resin cements
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used for chemical bonding to calcium in hydroxyapatite is 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). The aim of this study was to evaluate the influence of the10-MDP concentration on the bond strength and physical properties of self-adhesive resin cements. Materials and Methods: We used experimental resin cements containing 3 different concentrations of 10-MDP: 3.3 wt% (RC1), 6.6 wt% (RC2), or 9.9 wt% (RC3). The micro-tensile bond strength of each resin cement to dentin and a hybrid resin block (Estenia C&B, Kuraray Noritake Dental) was measured, and the fractured surface morphology was analyzed. Further, the flexural strength of the resin cements was measured using the three-point bending test. The water sorption and solubility of the cements following 30 days of immersion in water were measured. Results: The bond strength of RC2 was significantly higher than that of RC1. There was no significant difference between the bond strength of RC2 and that of RC3. The water sorption of RC3 was higher than that of any other cement. There were no significant differences in the three-point bending strength or water solubility among all three types of cements. Conclusions: Within the limitations of this study, it is suggested that 6.6 wt% 10-MDP showed superior properties than 3.3 wt% or 9.9 wt% 10-MDP in self-adhesive resin cement.
Abstract
Objectives: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used for chemical bonding to calcium in hydroxyapatite is 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). The aim of this study was to evaluate the influence of the10-MDP concentration on the bond strength and physical properties of self-adhesive resin cements. Materials and Methods: We used experimental resin cements containing 3 different concentrations of 10-MDP: 3.3 wt% (RC1), 6.6 wt% (RC2), or 9.9 wt% (RC3). The micro-tensile bond strength of each resin cement to dentin and a hybrid resin block (Estenia C&B, Kuraray Noritake Dental) was measured, and the fractured surface morphology was analyzed. Further, the flexural strength of the resin cements was measured using the three-point bending test. The water sorption and solubility of the cements following 30 days of immersion in water were measured. Results: The bond strength of RC2 was significantly higher than that of RC1. There was no significant difference between the bond strength of RC2 and that of RC3. The water sorption of RC3 was higher than that of any other cement. There were no significant differences in the three-point bending strength or water solubility among all three types of cements. Conclusions: Within the limitations of this study, it is suggested that 6.6 wt% 10-MDP showed superior properties than 3.3 wt% or 9.9 wt% 10-MDP in self-adhesive resin cement.
참고문헌 (33)
- Van Meerbeek B, "Hybridization effectiveness of a two-step versus a three-step smear layer removing adhesive system examined correlatively by TEM and AFM", J Adhes Dent, 1, pp.7~23 (1999)
- Asmussen E, "Short-and long-term bonding efficacy of a self-etching, one-step adhesive", J Adhes Dent, 5, pp.41~45 (2003)
- Beier US, "Clinical long-term evaluation and failure characteristics of 1, 335 all-ceramic restorations", Int J Prosthodont, 25, pp.70~78 (2012)
- van Dijken JW, "A prospective 15-year evaluation of extensive dentin-enamel-bonded pressed ceramic coverages", Dent Mater, 26, pp.929~939 (2010)
- Spencer P, "Unprotected protein at the dentin-adhesive interface", Quintessence Int, 30, pp.501~507 (1999)
- Walshaw PR, "Clinical considerations for optimal dentinal bonding", Quintessence Int, 27, pp.619~625 (1996)
- Frankenberger R, "Technique sensitivity of dentin bonding : effect of application mistakes on bond strength and marginal adaptation", Oper Dent, 25, pp.324~330 (2000)
- De Munck J, "Bonding of an auto-adhesive luting material to enamel and dentin", Dent Mater, 20, pp.963~971 (2004)
- Ibarra G, "Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self-adhesive resin-based dental cement", Dent Mater, 23, pp.218~225 (2007)
- Hosaka K, "Effect of wet vs. dry testing on the mechanical properties of hydrophilic self-etching primer polymers", Eur J Oral Sci, 115, pp.239~245 (2007)
- Ikemura K, "Design of new phosphonic acid monomers for dental adhesives--synthesis of(meth)acryloxyalkyl 3-phosphonopropionates and evaluation of their adhesion-promoting functions", Dent Mater J, 25, pp.566~575 (2006)
- Yoshida Y, "Comparative study on adhesive performance of functional monomers", J Dent Res, 83, pp.454~458 (2004)
- Braem M, "Mechanical properties and filler fraction of dental composites", Dent Mater, 5, pp.346~348 (1989)
- Söderholm KJ, "Influence of silane treatment and filler fraction on thermal expansion of composite resins", J Dent Res, 63, pp.1321~1326 (1984)
- Asmussen E, "Factors affecting the color stability of restorative resins", Acta Odontol Scand, 41, pp.11~18 (1983)
- Asmussen E, "Softening of BISGMA-based polymers by ethanol and by organic acids of plaque", Scand J Dent Res, 92, pp.257~261 (1984)
- Ito S, "Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity", Biomaterials, 26, pp.6449~6459 (2005)
- Vanlandingham MR, "Moisture diffusion in epoxy systems", J Appl Polym Sci, 71, pp.787~798 (1999)
- Ping ZH, "States of water in different hydrophilic polymers–DSC and FTIR studies", Polymer (Guildf), 42, pp.8461~8467 (2001)
- Liu M, "Study on diffusion behavior of water in epoxy resins cured by active ester", Phys Chem Chem Phys, 5, pp.1848~1852 (2003)
- Azevedo CG, "1-Year clinical study of indirect resin composite restorations luted with a self-adhesive resin cement : effect of enamel etching", Braz Dent J, 23, pp.97~103 (2012)
- Aschenbrenner CM, "Analysis of marginal adaptation and sealing to enamel and dentin of four self-adhesive resin cements", Clin Oral Investig, 16, pp.191~200 (2012)
- Pan Y, "Surface morphology and mechanical properties of conventional and self-adhesive resin cements after aqueous aging", J Appl Oral Sci, 27, pp.e20170449~ (2018)
- Sokolowski G, "Dental resin cements-the influence of water sorption on contraction stress changes and hydroscopic expansion", Materials(Basel), 11, pp.E973~ (2018)
- Tay FR, "Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers", Dent Mater, 17, pp.296~308 (2001)
- Hiraishi N, "Water concentration in self-etching primers affects their aggressiveness and bonding efficacy to dentin", J Dent Res, 84, pp.653~658 (2005)
- Bowen RL, "New surface-active comonomer for adhesive bonding", J Dent Res, 75, pp.606~610 (1996)
- Watanabe I, "Bonding to ground dentin by a phenyl-P self-etching primer", J Dent Res, 73, pp.1212~1220 (1994)
- Tay FR, "Water treeing in simplified dentin adhesives--déjà vu", Oper Dent, 30, pp.561~579 (2005)
- Tay FR, "Have dentin adhesives become too hydrophilic?", J Can Dent Assoc, 69, pp.726~731 (2003)
- Tay FR, "Single-step adhesives are permeable membranes", J Dent, 30, pp.371~382 (2002)
- Lin J, "Bonding of self-adhesive resin cements to enamel using different surface treatments : bond strength and etching pattern evaluations", Dent Mater J, 29, pp.425~432 (2010)
- Wu J, "Novel self-healing dental luting cements with microcapsules for indirect restorations", J Dent, 66, pp.76~82 (2017)