Three-dimensional analysis of tooth movement in Class II malocclusion treatment using arch wire with continuous tip-back bends and intermaxillary elastics
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to analyze three-dimensional (3D) changes in maxillary dentition in Class II malocclusion treatment using arch wire with continuous tip-back bends or compensating curve, together with intermaxillary elastics by superimposing 3D virtual models. Methods: The subjects were 20 patients (2 men and 18 women; mean age 20 years 7 months ± 3 years 9 months) with Class II malocclusion treated using 0.016 × 0.022- inch multiloop edgewise arch wire with continuous tip-back bends or titanium molybdenum alloy ideal arch wire with compensating curve, together with intermaxillary elastics. Linear and angular measurements were performed to investigate maxillary teeth displacement by superimposing pre- and posttreatment 3D virtual models using Rapidform 2006 and analyzing the results using paired t -tests. Results: There were posterior displacement of maxillary teeth (p < 0.01) with distal crown tipping of canine, second premolar and first molar (p < 0.05), expansion of maxillary arch (p < 0.05) with buccoversion of second premolar and first molar (p < 0.01), and distal-in rotation of first molar (p < 0.01). Reduced angular difference between anterior and posterior occlusal planes (p < 0.001), with extrusion of anterior teeth (p < 0.05) and intrusion of second premolar and first molar (p < 0.001) was observed. Conclusions: Class II treatment using an arch wire with continuous tip-back bends or a compensating curve, together with intermaxillary elastics, could retract and expand maxillary dentition, and reduce occlusal curvature. These results will help clinicians in understanding the mechanism of this Class II treatment.
Abstract
Objective: The aim of this study was to analyze three-dimensional (3D) changes in maxillary dentition in Class II malocclusion treatment using arch wire with continuous tip-back bends or compensating curve, together with intermaxillary elastics by superimposing 3D virtual models. Methods: The subjects were 20 patients (2 men and 18 women; mean age 20 years 7 months ± 3 years 9 months) with Class II malocclusion treated using 0.016 × 0.022- inch multiloop edgewise arch wire with continuous tip-back bends or titanium molybdenum alloy ideal arch wire with compensating curve, together with intermaxillary elastics. Linear and angular measurements were performed to investigate maxillary teeth displacement by superimposing pre- and posttreatment 3D virtual models using Rapidform 2006 and analyzing the results using paired t -tests. Results: There were posterior displacement of maxillary teeth (p < 0.01) with distal crown tipping of canine, second premolar and first molar (p < 0.05), expansion of maxillary arch (p < 0.05) with buccoversion of second premolar and first molar (p < 0.01), and distal-in rotation of first molar (p < 0.01). Reduced angular difference between anterior and posterior occlusal planes (p < 0.001), with extrusion of anterior teeth (p < 0.05) and intrusion of second premolar and first molar (p < 0.001) was observed. Conclusions: Class II treatment using an arch wire with continuous tip-back bends or a compensating curve, together with intermaxillary elastics, could retract and expand maxillary dentition, and reduce occlusal curvature. These results will help clinicians in understanding the mechanism of this Class II treatment.
참고문헌 (25)
- Kim YH, "Anterior openbite and its treatment with multiloop edgewise archwire", Angle Orthod, 57, pp.290~321 (1987)
- Liu J, "Successful treatment of postpeak stage patients with class II division 1 malocclusion using non-extraction and multiloop edgewise archwire therapy : a report on 16 cases", Int J Oral Sci, 1, pp.207~216 (2009)
- Locatelli R, "Molar distalization with superelastic NiTi wire", J Clin Orthod, 26, pp.277~279 (1992)
- Carano A, "The distal jet for upper molar distalization", J Clin Orthod, 30, pp.374~380 (1996)
- Keles A., "Maxillary unilateral molar distalization with sliding mechanics : a preliminary investigation", Eur J Orthod, 23, pp.507~515 (2001)
- Duran GS, "Three-dimensional analysis of tooth movements after palatal miniscrew-supported molar distalization", Am J Orthod Dentofacial Orthop, 150, pp.188~197 (2016)
- Dler Ali, "Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage", 대한치과교정학회지, 46(5), pp.280~289 (2016), 대한치과교정학회
- Chang YI, "Three-dimensional finite element analysis in distal en masse movement of the maxillary dentition with the multiloop edgewise archwire", Eur J Orthod, 26, pp.339~345 (2004)
- Enacar A, "A method for correction of open bite", J Clin Orthod, 30, pp.43~48 (1996)
- Küçükkeleş N, "Cephalometric evaluation of open bite treatment with NiTi arch wires and anterior elastics", Am J Orthod Dentofacial Orthop, 116, pp.555~562 (1999)
- 민샘, "III급 부정교합 환자에서 초탄성 Ni-Ti alloy wire를 이용한 비발치 치료", 대한치과교정학회지, 41(4), pp.297~306 (2011), 대한치과교정학회
- Shin SJ, "Three dimensional finite element analysis of the phenomenon during distal en masse movement of the maxillary dentition", Korean J Orthod, 28, pp.563~580 (1998)
- Malkoc S, "The effect of head rotation on cephalometric radiographs", Eur J Orthod, 27, pp.315~321 (2005)
- Gaddam R, "Assessment of image distortion from head rotation in lateral cephalometry", J Int Oral Health, 7, pp.35~40 (2015)
- Trpkova B, "Cephalometric landmarks identification and reproducibility : a meta analysis", Am J Orthod Dentofacial Orthop, 112, pp.165~170 (1997)
- Cha BK, "Analysis of tooth movement in extraction cases using three-dimensional reverse engineering technology", Eur J Orthod, 29, pp.325~331 (2007)
- Choi DS, "Accuracy and reliability of palatal superimposition of three-dimensional digital models", Angle Orthod, 80, pp.497~503 (2010)
- Cho MY, "Three-dimensional analysis of the tooth movement and arch dimension changes in Class I malocclusions treated with first premolar extractions : a guideline for virtual treatment planning", Am J Orthod Dentofacial Orthop, 138, pp.747~757 (2010)
- Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
- Hoggan BR, "The use of palatal rugae for the assessment of anteroposterior tooth movements", Am J Orthod Dentofacial Orthop, 119, pp.482~488 (2001)
- Chen G, "Stable region for maxillary dental cast superimposition in adults, studied with the aid of stable miniscrews", Orthod Craniofac Res, 14, pp.70~79 (2011)
- Joffe L., "OrthoCAD : digital models for a digital era", J Orthod, 31, pp.344~347 (2004)
- Yang WS, "A study of the regionalload deflection rate of multiloop edgewise arch wire", Angle Orthod, 71, pp.103~109 (2001)
- Fushima K, "Significance of the cant of the posterior occlusal plane in class II division 1 malocclusions", Eur J Orthod, 18, pp.27~40 (1996)
- 박헌묵, "Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage", 대한치과교정학회지, 42(6), pp.280~290 (2012), 대한치과교정학회