Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle’s Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5o, p < 0.001; 3.0o, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars. [Korean J Orthod 2016;46(5):280-289]
Abstract
Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle’s Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5o, p < 0.001; 3.0o, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars. [Korean J Orthod 2016;46(5):280-289]
참고문헌 (33)
- Park HS, "Group distal movement of teeth using microscrew implant anchorage", Angle Orthod, 75, pp.602~609 (2005)
- Egolf RJ, "Factors associated with orthodontic patient compliance with intraoral elastic and headgear wear", Am J Orthod Dentofacial Orthop, 97, pp.336~348 (1990)
- Keles A, "A new approach in maxillary molar distalization: intraoral bodily molar distalizer", Am J Orthod Dentofacial Orthop, 117, pp.39~48 (2000)
- Hilgers JJ, "The pendulum appliance for Class II noncompliance therapy", J Clin Orthod, 26, pp.706~714 (1992)
- Gianelly AA, "Japanese NiTi coils used to move molars distally", Am J Orthod Dentofacial Orthop, 99, pp.564~566 (1991)
- Gianelly AA, "The use of magnets to move molars distally", Am J Orthod Dentofacial Orthop, 96, pp.161~167 (1989)
- Locatelli R, "Molar distalization with superelastic NiTi wire", J Clin Orthod, 26, pp.277~279 (1992)
- Carano A, "The distal jet for upper molar distalization", J Clin Orthod, 30, pp.374~380 (1996)
- Keles A, "Maxillary unilateral molar distalization with sliding mechanics: a preliminary investigation", Eur J Orthod, 23, pp.507~515 (2001)
- Gelgör IE, "Intraosseous screw-supported upper molar distalization", Angle Orthod, 74, pp.838~850 (2004)
- Grec RH, "Intraoral distalizer effects with conventional and skeletal anchorage:a meta-analysis", Am J Orthod Dentofacial Orthop, 143, pp.602~615 (2013)
- 마수정, "Analysis of midpalatal miniscrew-assisted maxillary molar distalization patterns with simultaneous use of fixed appliances: A preliminary study", 대한치과교정학회지, 46(1), pp.55~61 (2016), 대한치과교정학회
- Amirfarhang Miresmaeili, "Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches", 대한치과교정학회지, 45(5), pp.236~244 (2015), 대한치과교정학회
- Alberto Caprioglio, "Comparative evaluation of molar distalization therapy using pendulum and distal screw appliances", 대한치과교정학회지, 45(4), pp.171~179 (2015), 대한치과교정학회
- Park HS, "Nonextraction treatment with microscrew implants", Angle Orthod, 74, pp.539~549 (2004)
- Trpkova B, "Cephalometric landmarks identification and reproducibility:a meta analysis", Am J Orthod Dentofacial Orthop, 112, pp.165~170 (1997)
- Hatcher DC, "Diagnosis goes digital", Am J Orthod Dentofacial Orthop, 125, pp.512~515 (2004)
- Moles R, "The SureSmile system in orthodontic practice", J Clin Orthod, 43, pp.161~174 (2009)
- Joffe L, "OrthoCAD: digital models for a digital era", J Orthod, 31, pp.344~347 (2004)
- Cha BK, "Analysis of tooth movement in extraction cases using three-dimensional reverse engineering technology", Eur J Orthod, 29, pp.325~331 (2007)
- Thiruvenkatachari B, "Measuring 3-dimensional tooth movement with a 3-dimensional surface laser scanner", Am J Orthod Dentofacial Orthop, 135, pp.480~485 (2009)
- Cho MY, "Three-dimensional analysis of the tooth movement and arch dimension changes in Class I malocclusions treated with first premolar extractions: a guideline for virtual treatment planning", Am J Orthod Dentofacial Orthop, 138, pp.747~757 (2010)
- 박헌묵, "Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage", 대한치과교정학회지, 42(6), pp.280~290 (2012), 대한치과교정학회
- Hoggan BR, "The use of palatal rugae for the assessment of anteroposterior tooth movements", Am J Orthod Dentofacial Orthop, 119, pp.482~488 (2001)
- Choi DS, "Accuracy and reliability of palatal superimposition of three-dimensional digital models", Angle Orthod, 80, pp.497~503 (2010)
- Chen G, "Stable region for maxillary dental cast superimposition in adults, studied with the aid of stable miniscrews", Orthod Craniofac Res, 14, pp.70~79 (2011)
- Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
- Oh YH, "Treatment effects of microimplant-aided sliding mechanics on distal retraction of posterior teeth", Am J Orthod Dentofacial Orthop, 139, pp.470~481 (2011)
- Lai EH, "Threedimensional dental model analysis of treatment outcomes for protrusive maxillary dentition:comparison of headgear, miniscrew, and miniplate skeletal anchorage", Am J Orthod Dentofacial Orthop, 134, pp.636~645 (2008)
- Yamada K, "Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region", Angle Orthod, 79, pp.78~84 (2009)
- Eui-Hyang Sung, "Distalization pattern of whole maxillary dentition according to force application points", 대한치과교정학회지, 45(1), pp.20~28 (2015), 대한치과교정학회
- Jeon JM, "En-masse distalization with miniscrew anchorage in Class II nonextract ion treatment", J Clin Orthod, 40, pp.472~476 (2006)
- Giuntini V, "Mesial rotation of upper first molars in Class II division 1 malocclusion in the mixed dentition: a controlled blind study", Prog Orthod, 12, pp.107~113 (2011)