Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150−200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results: Mean maxillary 1st molar distalization was 2.3 ± 1.1 mm, at a rate of 0.4 ± 0.2 mm/ month, and rotation was not significant. Intermolar width increased by 2.9 ± 1.8 mm. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement. [Korean J Orthod 2015;45(5):236-244]
Abstract
Objective: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150−200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results: Mean maxillary 1st molar distalization was 2.3 ± 1.1 mm, at a rate of 0.4 ± 0.2 mm/ month, and rotation was not significant. Intermolar width increased by 2.9 ± 1.8 mm. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement. [Korean J Orthod 2015;45(5):236-244]
참고문헌 (29)
- Ruhi Nalçaci, "Noncompliance screw supported maxillary molar distalization in a parallel manner", 대한치과교정학회지, 40(4), pp.250~259 (2010), 대한치과교정학회
- Choi YJ, "Total distalization of the maxillary arch in a patient with skeletal Class II malocclusion", Am J Orthod Dentofacial Orthop, 139, pp.823~833 (2011)
- Choi NC, "Treatment of Class II protrusion with severe crowding using indirect miniscrew anchorage", Angle Orthod, 77, pp.1109~1118 (2007)
- Grec RH, "Intraoral distalizer effects with conventional and skeletal anchorage:a meta-analysis", Am J Orthod Dentofacial Orthop, 143, pp.602~615 (2013)
- Sugawara J, "Distal movement of maxillary molars in nongrowing patients with the skeletal anchorage system", Am J Orthod Dentofacial Orthop, 129, pp.723~733 (2006)
- Kinzinger GS, "Treatment effects of intraoral appliances with conventional anchorage designs for non-compliance maxillary molar distalization: a literature review", Eur J Orthod, 30, pp.558~571 (2008)
- Sodagar A, "Fabrication and evaluation of a noncompliant molar distalizing appliance: bonded molar distalizer", J Dent (Tehran), pp.107~116 (2011)
- McSherry PF, "Class II correction-reducing patient compliance: a review of the available techniques", J Orthod, 27, pp.219~225 (2000)
- Mavropoulos A, "Efficiency of noncompliance simultaneous first and second upper molar distalization:a three-dimensional tooth movement analysis", Angle Orthod, 75, pp.532~539 (2005)
- Gelgör IE, "Intraosseous screw-supported upper molar distalization", Angle Orthod, 74, pp.838~850 (2004)
- Cornelis MA, "Maxillary molar distalization with miniplates assessed on digital models:a prospective clinical trial", Am J Orthod Dentofacial Orthop, 132, pp.373~377 (2007)
- Gelgor IE, "Comparison of 2 distalization systems supported by intraosseous screws", Am J Orthod Dentofacial Orthop, 131, pp.161~ (2007)
- Kuroda S, "Class II malocclusion treated with miniscrew anchorage: comparison with traditional orthodontic mechanics outcomes", Am J Orthod Dentofacial Orthop, 135, pp.302~309 (2009)
- Park HS, "Group distal movement of teeth using microscrew implant anchorage", Angle Orthod, 75, pp.602~609 (2005)
- Blaya MG, "Patient’s perception on mini-screws used for molar distalization", Rev Odonto Ciênc, 25, pp.266~270 (2010)
- Park HS, "Nonextraction treatment with microscrew implants", Angle Orthod, 74, pp.539~549 (2004)
- Goyal A, "Miniimplant supported molar distalization", J Dent Implant, 2, pp.136~140 (2013)
- Villela HM, "Use of orthodontic miniscrews in asymmetrical corrections", Dental Press J Orthod, 13, pp.107~117 (2008)
- Kang YG, "Control of maxillary dentition with 2 midpalatal orthodontic miniscrews", Am J Orthod Dentofacial Orthop, 140, pp.879~885 (2011)
- Yamada K, "Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region", Angle Orthod, 79, pp.78~84 (2009)
- Graber LW, "Orthodontics, current principles and techniques biomechanical considerations with temporary anchorage devices", pp.381~420 (2012), Mosby
- Oberti G, "Maxillary molar distalization with the dualforce distalizer supported by mini-implants: a clinical study", Am J Orthod Dentofacial Orthop, 135, pp.282~ (2009)
- Almeida MA, "Stability of the palatal rugae as landmarks for analysis of dental casts", Angle Orthod, 65, pp.43~48 (1995)
- Kircelli BH, "Maxillary molar distalization with a bone-anchored pendulum appliance", Angle Orthod, 76, pp.650~659 (2006)
- Escobar SA, "Distalization of maxillary molars with the bone-supported pendulum: a clinical study", Am J Orthod Dentofacial Orthop, 131, pp.545~549 (2007)
- Lai EH, "Threedimensional dental model analysis of treatment outcomes for protrusive maxillary dentition: comparison of headgear, miniscrew, and miniplate skeletal anchorage", Am J Orthod Dentofacial Orthop, 134, pp.636~645 (2008)
- Polat-Ozsoy O, "Pendulum appliances with 2anchorage designs: conventional anchorage vs bone anchorage", Am J Orthod Dentofacial Orthop, 133, pp.339~ (2008)
- Sar C, "Comparison of two implant-supported molar distalization systems", Angle Orthod, 83, pp.460~467 (2013)
- Hoggan BR, "The use of palatal rugae for the assessment of anteroposterior tooth movements", Am J Orthod Dentofacial Orthop, 119, pp.482~488 (2001)