5 nm 급 반도체 배선 공정 기술 개발
Development of Interconnect Process Technology for 5 nm Technology Nodes
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The semiconductor industry has been developed mainly by micronization process due to many advantages of miniaturization of devices. Mass production of semiconductors of 10 nm class has been started recently, and it is expected that the technology generation of 5 nm & 7 nm technology will come. However, excessive linewidth reduction affects physical limits and device reliability. To solve these problems, new process technology development and new concept devices are being studied. In this review, we introduce the next generation technology and introduce the advanced research for the new concept device.
Abstract
The semiconductor industry has been developed mainly by micronization process due to many advantages of miniaturization of devices. Mass production of semiconductors of 10 nm class has been started recently, and it is expected that the technology generation of 5 nm & 7 nm technology will come. However, excessive linewidth reduction affects physical limits and device reliability. To solve these problems, new process technology development and new concept devices are being studied. In this review, we introduce the next generation technology and introduce the advanced research for the new concept device.
참고문헌 (44)
- 조영학, "3D 적층 IC를 위한 웨이퍼 레벨 본딩 기술", 마이크로전자 및 패키징학회지, 20(1), pp.7~13 (2013), 한국마이크로전자및패키징학회[DOI]
- R. K. Cavin, "Science and engineering beyond Moore's law", Proceedings of the IEEE 2012, 100(Special Centennial Issue), pp.1720~ (2012)
- J. A. Hutchby, "A “Moore's Law”-like approach to roadmapping photovoltaic technologies", Renewable and Sustainable Energy Reviews, 29, pp.883~ (2014)
- K. Chang, "In Power benefit study of monolithic 3D IC at the 7nm technology node, Low Power Electronics and Design (ISLPED)", 2015 IEEE, 2015, 201~[DOI]
- M. Xu, "Improved short channel effect control in bulk finFETs with vertical implantation to form self-aligned halo and punch-through stop pocke", IEEE Electron Device Letters, 36(7), pp.648~ (2015)
- Y. Xiao, "A compact model of subthreshold current with source", drain depletion effect for the short-channel junctionless cylindrical surrounding-gate MOSFETs, 2016, pp.63(5), 2176~
- C. Auth, "In A 22 nm high performance and low-power CMOS tech nology featuring fully-depleted tri-gate transistors, selfaligned contacts and high density MIM capacitors", VLSI technology (VLSIT), 2012 symposium on, pp.131~ (2012), IEEE
- G. A. Rodriguez-Ruiz, "Experimental and Simulation Results of Magnetic Modulation of Gate Oxide Tunneling Current in Nanoscaled MOS Transistors", IEEE Electron Device Letters, 36(4), pp.387~ (2015)
- Y. K. Lin, "Modeling of Subsurface Leakage Current in Low Short Channel MOSFET at Accumulation Bias", IEEE Transactions on Electron Devices, 63(5), pp.1840~ (2016)
- R. H. Dennard, "Design of ion-implanted MOSFET's with very small physical dimensions", IEEE Journal of Solid-State Circuits, 9(5), pp.256~ (1974)
- M. Ieong, "Silicon device scaling to the sub-10-nm regime", Science, 306(5704), pp.2057~ (2004)
- S. M. Jung, "In Three dimensionally stacked NAND flash memory technology using stacking single crystal Si layers on ILD and TANOS structure for beyond 30 nm node", 2006 International Electron Devices Meeting, pp.1~ (2006), IEEE
- C. Qiu, "Carbon nanotube feedback-gate field-effect transistor: suppressing current leakage and increasing on", off ratio, 2015, pp.9(1), 969~
- Y. Yang, "Processing assessment and adhesion evaluation of copper through-silicon vias (TSVs) for three-dimensional stacked-integrated circuit (3D-SIC) architectures", Microelectronics Reliability, 50(9), pp.1636~ (2010)
- S. Y. Chou, "Imprint lithography with 25-nanometer resolution", Science, 272(5258), pp.85~ (1996)
- J. de Klerk, "In Performance of a 1.35 NA ArF immersion lithography system for 40-nm applications", Advanced Lithography, International Society for Optics and Photonics, pp.65201Y~ (2007)
- L. Liebmann, "In The daunting complexity of scaling to 7nm without EUV: Pushing DTCO to the extreme", SPIE Advanced Lithography, International Society for Optics and Photonics, pp.942702~ (2015)
- D. Ingerly, "In Low-k interconnect stack with metal-insulator-metal capacitors for 22nm high volume manufacturing", 2012 IEEE International Interconnect Technology Conference, pp.1~ (2012), IEEE
- X. Liu, "A Model of Air-Gap Through-Silicon Vias (TSVs) for Microwave Applications", IEEE Microwave and Wireless Components Letters, 25(8), pp.493~ (2015)
- Y. H. Cheng, "Deep trench isolation with air-gap in backside illumination image sensor chips", US Patents 9293490 B2, ~ (2016)
- K. Fischer, "In Low-k interconnect stack with multi-layer air gap and trimetal-insulator-metal capacitors for 14nm high volume manufacturing", 2015 IEEE International Interconnect Technology Conference and 2015 IEEE Materials for Advanced Metallization Conference (IITC, 2015, 5~[DOI]
- K. Fischer, "In Performance enhancement for 14 nm high volume manufacturing microprocessor and system on a chip processes", Interconnect Technology Conference, AMC), 2016 IEEE International, pp.2016[DOI]
- R. Ramos, "In Nanocarbon interconnects combining vertical CNT interconnects and horizontal graphene lines", Interconnect Technology Conference, AMC), 2016 IEEE International, pp.2016[DOI]
- S. Iijima, "Helical microtubules of graphitic carbon", Nature, 354(6348), pp.56~ (1991)
- S. J. Tans, "Room-temperature transistor based on a single carbon nanotube", Nature, 393(6680), pp.49~ (1998)
- R. Martel, "Single-and multi-wall carbon nanotube field-effect transistors", Appl. Phys. Lett, 73(17), pp.2447~ (1998)
- H. Shimotani, "Gate capacitance in electrochemical transistor of single-walled carbon nanotube", Appl. Phys. Lett, 88(7), pp.073104~ (2006)
- P. Beecher, "Inkjet printing of carbon nanotube thin film transistors", J. Appl. Phys, 102(4), pp.043710~ (2007)
- J. Guo, "A numerical study of scaling issues for Schottky-barrier carbon nanotube transistors", IEEE transactions on electron devices, 51(2), pp.172~ (2004)
- S. Heinze, "Carbon nanotubes as Schottky barrier transistors", Phys. Rev. Lett, 89(10), pp.106801~ (2002)
- Q. Shao, "Hightemperature quenching of electrical resistance in graphene interconnects", Appl. Phys. Lett, 92(20), pp.202108~ (2008)
- X. Li, "Chemically derived, ultrasmooth graphene nanoribbon semiconductors", Science, 319(5867), pp.1229~ (2008)
- F. Schwierz, "Graphene transistors", Nat. Nanotechnol, 5(7), pp.487~ (2010)
- J. B. Oostinga, "Gate-induced insulating state in bilayer graphene devices", Nat. Mater, 7(2), pp.151~ (2008)
- V. M. Pereira, "Tight-binding approach to uniaxial strain in graphene", Phys. Rev, B80(4), pp.045401~ (2009)
- J. Bai, "Graphene nanomes", Nanotechnol, 5(3), pp.190~ (2010)
- C. G. Kang, "Effects of multi-layer graphene capping on Cu interconnects", Nanotechnology, 24(11), pp.115707~ (2013)
- K. Ghosh, "Graphene-CNT hetero-structure for next generation interconnects", RSC Adv, 6(58), pp.53054~ (2016)
- S. B. Lee, "An inductively powered scalable 32-channel wireless neural recording system-on-a-chip for neuroscience applications", IEEE Trans. Biomed. Circuits. Syst, 4(6), pp.360~ (2010)
- P. H. Pham, "In Neuflow: Dataflow vision processing system-on-a-chip", 2012 IEEE 55th International Midwest Symposium on Circuits and Systems (MWSCAS), pp.1044~ (2012), IEEE
- P. Zarkesh-Ha, "In An integrated architecture for global interconnects in a gigascale system-on-a-chip (GSoC)", Proc. 12th International Conference on Microelectronics, 2000 (ICM 2000), pp.149~ (2000), IEEE
- M. F. Chang, "In Supply-variation-resilient nonvolatile 3D IC and 3D memory using low peak-current on-chip charge-pump circuits", Electron Devices and Solid-State Circuits (EDSSC), 2015 IEEE International Conference on, pp.118~ (2015), IEEE
- 이강욱, "3-D Hetero-Integration Technologies for Multifunctional Convergence Systems", 마이크로전자 및 패키징학회지, 22(2), pp.11~19 (2015), 한국마이크로전자및패키징학회[DOI]
- M. Vinet, "In Monolithic 3D integration: A powerful alternative to classical 2D scaling", 2014 SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), pp.1~ (2014), IEEE
