Discoloration of various CAD/CAM blocks after immersion in coffee
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: This study evaluated color differences (ΔEs) and translucency parameter changes (ΔTPs) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE L*a*b* values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ΔEs and ΔTPs of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey’s multiple comparisons (α = 0.05). The ΔEs after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ΔEs of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ΔTPs decreased. The ANOVA of ΔEs and ΔTPs revealed significant differences in two main factors, immersion periods and media, and their interaction except for ΔEs of TEL (Telio CAD, Ivoclar Vivadent). The ΔEs significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ΔEs and water sorption or solubility in water. Conclusions: The ΔEs of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.
Abstract
Objectives: This study evaluated color differences (ΔEs) and translucency parameter changes (ΔTPs) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE L*a*b* values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ΔEs and ΔTPs of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey’s multiple comparisons (α = 0.05). The ΔEs after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ΔEs of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ΔTPs decreased. The ANOVA of ΔEs and ΔTPs revealed significant differences in two main factors, immersion periods and media, and their interaction except for ΔEs of TEL (Telio CAD, Ivoclar Vivadent). The ΔEs significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ΔEs and water sorption or solubility in water. Conclusions: The ΔEs of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.
참고문헌 (36)
- Miyazaki T, "Current status of zirconia restoration", J Prosthodont Res, 57, pp.236~261 (2013)
- Li RW, "Ceramic dental biomaterials and CAD", CAM technology: state of the art, 2014, pp.58, 208~216
- Giordano R, "Materials for chairside CAD", CAM-produced restorations, 2006, pp.137, 14S~21S
- Nguyen JF, "Resin composite blocks via high-pressure high-temperature polymerization", Dent Mater, 28, pp.529~534 (2012)
- Coldea A, "Mechanical properties of polymer-infiltrated-ceramic-network materials", Dent Mater, 29, pp.419~426 (2013)
- "ISO 6872 Dentistry - Ceramic materials", Geneva:International Organization for Standardization, ~ (2008)
- Lauvahutanon S, "Mechanical properties of composite resin blocks for CAD", CAM, 2014, pp.33, 705~710
- Conrad HJ, "Current ceramic materials and systems with clinical recommendations:a systematic review", J Prosthet Dent, 98, pp.389~404 (2007)
- Mitra SB, "An application of nanotechnology in advanced dental materials", J Am Dent Assoc, 134, pp.1382~1390 (2003)
- Della Bona A, "The clinical success of allceramic restorations", J Am Dent Assoc, 139, pp.8S~13S (2008)
- Watts A, "Tooth discoloration and staining: a review of the literature", Br Dent J, 190, pp.309~316 (2001)
- Choi MS, "Changes in surface characteristics of dental resin composites after polishing", J Mater Sci Mater Med, 16, pp.347~353 (2005)
- Paravina RD, "Color difference thresholds in dentistry", J Esthet Restor Dent, 27, pp.S1~S9 (2015)
- Pallesen U, "Composite resin fillings and inlays. An 11-year evaluation", Clin Oral Investig, 7, pp.71~79 (2003)
- Karaarslan ES, "Clinical evaluation of direct composite restorations and inlays: results at 12months", J Restor Dent, 2, pp.70~77 (2014)
- Barutcigil Ç, "Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites", J Dent, 40, pp.e57~e63 (2012)
- Arocha MA, "Color stability of siloranes versus methacrylate-based composites after immersion in staining solutions", Clin Oral Investig, 17, pp.1481~1487 (2013)
- Imamura S, "Effect of filler type and polishing on the discoloration of composite resin artificial teeth", Dent Mater J, 27, pp.802~808 (2008)
- Schneider LF, "Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites", Dent Mater, 24, pp.1169~1177 (2008)
- Falkensammer F, "Color stability of different composite resin materials", J Prosthet Dent, 109, pp.378~383 (2013)
- Shin DH, "Degree of conversion and color stability of the light curing resin with new photoinitiator systems", Dent Mater, 25, pp.1030~1038 (2009)
- Stober T, "Color stability of highly filled composite resin materials for facings", Dent Mater, 17, pp.87~94 (2001)
- Shiozawa M, "Color stability of adhesive resin cements after immersion in coffee", Clin Oral Investig, 19, pp.309~317 (2015)
- Wang F, "Translucency of dental ceramics with different thickness", J Prosthet Dent, 110, pp.14~20 (2013)
- Johnston WM, "Color measurement in dentistry", J Dent, 37(Supplement 1), pp.e2~e6 (2009)
- Ghinea R, "Color difference thresolds in dental ceramics", J Dent, 38(Supplement 2), pp.e57~e64 (2010)
- Khashayar G, "Perceptibility and acceptability thresholds for colour differences in dentistry", J Dent, 42, pp.637~644 (2014)
- "ISO 4049 Dentistry - Polymer-based restorative materials", International Organization for Standardization, ~ (2009)
- Haselton DR, "Color stability of provisional crown and fixed partial denture resins", J Prosthet Dent, 93, pp.70~75 (2005)
- Amal Alharbi, "Stain susceptibility of composite and ceramic CAD", CAM blocks versus direct resin composites with different resinous matrices, 2017, pp.105(2), 162~169[DOI]
- Loquercio AD, "A 12-month clinical evaluation of composite resins in class III restorations", J Adhes Dent, 9, pp.57~64 (2007)
- Korkmaz Ceyhan Y, "Accelerated aging effects on color and translucency of flowable composites", J Esthet Restor Dent, 26, pp.272~278 (2014)
- Druck CC, "Adhesion to Y-TZP ceramic: study of silica nanofilm coating on the surface of Y-TZP", J Biomed Mater Res B Appl Biomater, 103, pp.143~150 (2015)
- Sideridou I, "Study of water sorption, solubility and modulus of elasticity of lightcured dimethacrylate-based dental resins", Biomaterials, 24, pp.655~665 (2003)
- Söderholm KJ, "Hydrolytic degradation of dental composites", J Dent Res, 63, pp.1248~1254 (1984)
- Ertaş E, "Color stability of resin composites after immersion in different drinks", Dent Mater J, 25, pp.371~376 (2006)