Effect of polishing methods on color change by water absorption in several composite resins
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in 34°C distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE L*a*b* color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in 34°C distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ΔE values compared to PoGo and control group (P < 0.05). The ΔE values of polished group showed the significantly lower than the ΔE values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ΔE values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ΔE values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.
Abstract
Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in 34°C distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE L*a*b* color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in 34°C distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ΔE values compared to PoGo and control group (P < 0.05). The ΔE values of polished group showed the significantly lower than the ΔE values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ΔE values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ΔE values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.
참고문헌 (24)
- Schmitt VL, "Effect of the polishing procedures on color stability and surface roughness of composite resins", ISRN Dent, 2011, pp.617672~ (2011)
- Douglas WH, "Resistance to extrinsic stains by hydrophobic composite resin systems", J Dent Res, 61, pp.41~43 (1982)
- Shamszadeh S, "Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee", Water Immersion, 2016, pp.2016, 7186140~
- Rueggeberg FA, "The effect of oxygen inhibition on an unfilled", filled composite system, 1990, pp.69, 1652~1658
- Attar N, "The effect of finishing and polishing procedures on the surface roughness of composite resin materials", J Contemp Dent Pract, 8, pp.27~35 (2007)
- Patel B, "Effect of different polishing systems on the surface roughness of nanohybrid composites", J Conserv Dent, 19, pp.37~40 (2016)
- Kritzinger D, "The effect of different polishing systems on the surface roughness of a nanocomposite and a microhybrid composite", SADJ, 72, pp.249~257 (2017)
- Munteanu B, "Evaluation of surface condition after finishing and polishing of a flowable composite material", Int J Med Dent, 6, pp.124~129 (2016)
- Ilie N, "Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance", Oper Dent, 38, pp.618~625 (2013)
- Bucuta S, "Light transmittance and micromechanical properties of bulk fill vs. conventional resin based composites", Clin Oral Investig, 18, pp.1991~2000 (2014)
- Liberman R, "Development and assessment of an objective method of colour change measurement for acrylic denture base resins", J Oral Rehabil, 22, pp.445~449 (1995)
- Ergücü Z, "Color stability of nanocomposites polished with one-step systems", Oper Dent, 33, pp.413~420 (2008)
- Türkün LS, "The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials", Oper Dent, 29, pp.203~211 (2004)
- Lu H, "Effect of polishing systems on the surface roughness of microhybrid composites", J Esthet Restor Dent, 15, pp.297~304 (2003)
- Venturini D, "Effect of polishing techniques and time on surface roughness, hardness and microleakage of resin composite restorations", Oper Dent, 31, pp.11~17 (2006)
- Sideridou I, "Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins", Biomaterials, 24, pp.655~665 (2003)
- Choi MS, "Changes in surface characteristics of dental resin composites after polishing", J Mater Sci Mater Med, 16, pp.347~353 (2005)
- Villalta P, "Effects of staining and bleaching on color change of dental composite resins", J Prosthet Dent, 95, pp.137~142 (2006)
- Ertaş E, "Color stability of resin composites after immersion in different drinks", Dent Mater J, 25, pp.371~376 (2006)
- Thumu J, "Effect of Staining Solutions on the Color Stability of Conventional and Bulk Fill Nanohybrid Resin Composites: A Spectrophotometric Analysis", J Oper Dent Endod, 2, pp.1~5 (2017)
- Buchalla W, "The effect of water storage and light exposure on the color and translucency of a hybrid and a microfilled composite", J Prosthet Dent, 87, pp.264~270 (2002)
- Johnston WM, "Assessment of appearance match by visual observation and clinical colorimetry", J Dent Res, 68, pp.819~822 (1989)
- Inokoshi S, "Opacity and color changes of tooth-colored restorative materials", Oper Dent, 21, pp.73~80 (1996)
- Moore RJ, "Burritt DJ. Intra-oral temperature variation over 24 hours", Eur J Orthod, 21, pp.249~261 (1999)