A study of fracture loads and fracture characteristics of teeth
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The purpose of this in vitro study was to investigate the fracture loads and modes of failure for the full range of natural teeth under simulated occlusal loading. MATERIALS AND METHODS. One hundred and forty natural teeth were taken from mandibles and maxillas of patients. There were 14 groups of teeth with 10 teeth in each group (5 males and 5 females). Each specimen was embedded in resin and mounted on a positioning jig, with the long axis of the tooth at an inclined angle of 30 degrees. A universal testing machine was used to measure the compression load at which fracture of the tooth specimen occurred; loads were applied on the incisal edge and/or functional cusp. RESULTS. The mean fracture load for the mandibular first premolar was the highest (2002 N) of all the types of teeth, while the mean fracture load for the maxillary first premolar was the lowest (525 N). Mean fracture loads for the mandibular and maxillary incisors, and the first and second maxillary premolars, had significantly lower values compared to the other types of teeth. The mean fracture load for the teeth from males was significantly greater than that for the teeth from females. There was an inverse relationship between age and mean fracture load, in which older teeth had lower fracture loads compared to younger teeth. CONCLUSION. The mean fracture loads for natural teeth were significantly different, with dependence on tooth position and the sex and age of the individual.
Abstract
PURPOSE. The purpose of this in vitro study was to investigate the fracture loads and modes of failure for the full range of natural teeth under simulated occlusal loading. MATERIALS AND METHODS. One hundred and forty natural teeth were taken from mandibles and maxillas of patients. There were 14 groups of teeth with 10 teeth in each group (5 males and 5 females). Each specimen was embedded in resin and mounted on a positioning jig, with the long axis of the tooth at an inclined angle of 30 degrees. A universal testing machine was used to measure the compression load at which fracture of the tooth specimen occurred; loads were applied on the incisal edge and/or functional cusp. RESULTS. The mean fracture load for the mandibular first premolar was the highest (2002 N) of all the types of teeth, while the mean fracture load for the maxillary first premolar was the lowest (525 N). Mean fracture loads for the mandibular and maxillary incisors, and the first and second maxillary premolars, had significantly lower values compared to the other types of teeth. The mean fracture load for the teeth from males was significantly greater than that for the teeth from females. There was an inverse relationship between age and mean fracture load, in which older teeth had lower fracture loads compared to younger teeth. CONCLUSION. The mean fracture loads for natural teeth were significantly different, with dependence on tooth position and the sex and age of the individual.
참고문헌 (21)
- Jordan RE, "Dental anatomy and occlusion", pp.43~66 (1992), Mosby-Year Book
- Habelitz S, "Mechanical properties of human dental enamel on the nanometre scale", Arch Oral Biol, 46, pp.173~183 (2001)
- Pegoretti A, "Finite element analysis of a glass fibre reinforced composite endodontic post", Biomaterials, 23, pp.2667~2682 (2002)
- Strub JR, "Fracture strength of 5 different allceramic crown systems", Int J Prosthodont, 11, pp.602~609 (1998)
- Potiket N, "In vitro fracture strength of teeth restored with different all-ceramic crown systems", J Prosthet Dent, 92, pp.491~495 (2004)
- Attia A, "Fracture strength of all-ceramic crowns luted using two bonding methods", J Prosthet Dent, 91, pp.247~252 (2004)
- Al-Omiri MK, "Fracture resistance of teeth restored with post-retained restorations : an overview", J Endod, 36, pp.1439~1449 (2010)
- Dong JK, "Fracture strength of the IPS empress crown : The effect of occlusal depth and axial inclination on upper first premolar crowns", J Korean Acad Prosthodont, 37, pp.127~133 (1999)
- 이인섭, "치아 부위에 따른 지르코니아 도재관의 파절강도", 대한치과보철학회지, 48(02), pp.94~100 (2010), 대한치과보철학회[DOI]
- Lee JH, "Enamel thickness of maxillary first premolar", J Korean Acad Stoma Func Occl, 18, pp.31~38 (2002)
- 신동국, "IPS Empress 도재관의 파절강도:상악 견치에서 절단연 삭제량과 축면 경사도에 따른 영향", 대한치과보철학회지, 43(1), pp.30~40 (2005), 대한치과보철학회
- Song BK, "Fracture strength of the IPS empress crown. The effect of occlusal depth and axial inclination on upper central incisor", J Korean Acad Stoma Func Occl, 16, pp.237~245 (2000)
- Nam YS, "Fracture strength of the IPS empress crown. The effect of incisal reduction and axial inclination on lower central incisor", J Korean Acad Stomato Func Occlu, 19, pp.207~217 (2003)
- 김희진, "IPS Empress 도재관의 파절강도 : 하악 제2소구치에서 교합면 두께와 축면 경사도에 따른 영향", 대한치과보철학회지, 40(5), pp.441~450 (2002), 대한치과보철학회
- Ottl P, "Fracture characteristics of carbon fibre, ceramic and non-palladium endodontic post systems at monotonously increasing loads", J Oral Rehabil, 29, pp.175~183 (2002)
- Wall JG, "Incisal-edge strength of porcelain laminate veneers restoring mandibular incisors", Int J Prosthodont, 5, pp.441~446 (1992)
- Oh SC, "A study on morphology and size of clinical crown of permanent mandibular molar in Korean adult", J Korean Acad Prosthodont, 37, pp.242~255 (1999)
- Browning JD, "Movement of three removable partial denture clasp assemblies under occlusal loading", J Prosthet Dent, 55, pp.69~74 (1986)
- Jo JH, "Stress analysis of various esthetic restorations by finite element method", J Korean Acad Prosthodont, 29, pp.129~146 (1991)
- Stanford JW, "Compressive properties of hard tooth tissues and some restorative materials", J Am Dent Assoc, 60, pp.746~756 (1960)
- Meredith N, "Measurement of the microhardness and Young’s modulus of human enamel and dentine using an indentation technique", Arch Oral Biol, 41, pp.539~545 (1996)