Critical evaluation of fracture strength testing for endodontically treated teeth: a finite element analysis study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: The aim of this study was to investigate whether the diameter and direction of the plunger and simulation of the periodontal ligament (PDL) affected the stress distribution in endodontically treated premolars. Methods: A fracture strength test was simulated via finite element analysis. A base model was set up, and the following parameters were modified: plunger diameter (3 mm vs. 6 mm), plunger direction (vertical vs. 135° angular to the central fossa), and PDL simulation. The analysis was conducted using the CosmosWorks structural analysis program, and the results are presented in terms of von Mises stresses. Results: The smaller plunger increased the stresses at the contact area of the crown, but the plunger diameter had no effect on the stress distribution within the root. An angular plunger direction increased stresses within the root, as well as at the buccal cusp of the crown, compared with the vertical direction. Simulation of the PDL caused higher stress accumulation, especially in the cervical region of the root. Conclusions: The plunger diameter had no effect on the stress distribution in the roots, whereas the plunger direction and PDL simulation did affect the stress distribution. More stringent standards can be established by taking such parameters into account when performing fracture testing in future studies.
Abstract
Objectives: The aim of this study was to investigate whether the diameter and direction of the plunger and simulation of the periodontal ligament (PDL) affected the stress distribution in endodontically treated premolars. Methods: A fracture strength test was simulated via finite element analysis. A base model was set up, and the following parameters were modified: plunger diameter (3 mm vs. 6 mm), plunger direction (vertical vs. 135° angular to the central fossa), and PDL simulation. The analysis was conducted using the CosmosWorks structural analysis program, and the results are presented in terms of von Mises stresses. Results: The smaller plunger increased the stresses at the contact area of the crown, but the plunger diameter had no effect on the stress distribution within the root. An angular plunger direction increased stresses within the root, as well as at the buccal cusp of the crown, compared with the vertical direction. Simulation of the PDL caused higher stress accumulation, especially in the cervical region of the root. Conclusions: The plunger diameter had no effect on the stress distribution in the roots, whereas the plunger direction and PDL simulation did affect the stress distribution. More stringent standards can be established by taking such parameters into account when performing fracture testing in future studies.
참고문헌 (32)
- de Chevigny C, "Treatment outcome in endodontics : the Toronto study--phase 4 : initial treatment", J Endod, 34, pp.258~263 (2008)
- Fonzar F, "The prognosis of root canal therapy : a 10-year retrospective cohort study on 411 patients with 1175 endodontically treated teeth", Eur J Oral Implantology, 2, pp.201~208 (2009)
- Touré B, "Analysis of reasons for extraction of endodontically treated teeth : a prospective study", J Endod, 37, pp.1512~1515 (2011)
- Tsesis I, "Diagnosis of vertical root fractures in endodontically treated teeth based on clinical and radiographic indices : a systematic review", J Endod, 36, pp.1455~1458 (2010)
- Khasnis SA, "Vertical root fractures and their management", J Conserv Dent, 17, pp.103~110 (2014)
- Zadik Y, "Analysis of factors related to extraction of endodontically treated teeth", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 106, pp.e31~e35 (2008)
- Guneser MB, "Fracture resistance of roots obturated with a novel calcium silicate-based endodontic sealer (BioRoot RCS)", J Adhes Sci Technol, 30, pp.2420~2428 (2016)
- Hshad ME, "Influence of different restoration techniques on fracture resistance of root-filled teeth : in vitro investigation", Oper Dent, 43, pp.162~169 (2018)
- Faggion CM Jr, "Guidelines for reporting pre-clinical in vitro studies on dental materials", J Evid Based Dent Pract, 12, pp.182~189 (2012)
- Krithikadatta J, "CRIS Guidelines(Checklist for Reporting In-vitro Studies) : a concept note on the need for standardized guidelines for improving quality and transparency in reporting in-vitro studies in experimental dental research", J Conserv Dent, 17, pp.301~304 (2014)
- Pegoretti A, "Finite element analysis of a glass fibre reinforced composite endodontic post", Biomaterials, 23, pp.2667~2682 (2002)
- Hu T, "Finite element analysis", pp.99~120 (2010), IntechOpen
- Williams KR, "A finite element stress analysis of an endodontically restored tooth", Eng Med, 13, pp.167~173 (1984)
- Belli S, "Effect of root filling on stress distribution in premolars with endodontic-periodontal lesion : a finite elemental analysis study", J Endod, 42, pp.150~155 (2016)
- Baumgaertel S, "Cortical bone thickness and bone depth of the posterior palatal alveolar process for mini-implant insertion in adults", Am J Orthod Dentofacial Orthop, 140, pp.806~811 (2011)
- Ash MM, "Wheeler's dental anatomy, physiology, and occlusion" (2003), Saunders
- Ausiello P, "Effect of adhesive layer properties on stress distribution in composite restorations--a 3D finite element analysis", Dent Mater, 18, pp.295~303 (2002)
- Craig RG, "Elastic and mechanical properties of human dentin", J Dent Res, 37, pp.710~718 (1958)
- Kawasaki T, "Relationship between the stress distribution and the shape of the alveolar residual ridge--three-dimensional behaviour of a lower complete denture", J Oral Rehabil, 28, pp.950~957 (2001)
- Rees J, "The elastic moduli of enamel and dentine", Clin Mater, 14, pp.35~39 (1993)
- Ruse ND, "Propagation of erroneous data for the modulus of elasticity of periodontal ligament and gutta percha in FEM", FEA papers : a story of broken links, 2008, pp.24, 1717~1719
- Onnink PA, "An in vitro comparison of incomplete root fractures associated with three obturation techniques", J Endod, 20, pp.32~37 (1994)
- Lertchirakarn V, "Finite element analysis and strain-gauge studies of vertical root fracture", J Endod, 29, pp.529~534 (2003)
- Sathorn C, "A comparison of the effects of two canal preparation techniques on root fracture susceptibility and fracture pattern", J Endod, 31, pp.283~287 (2005)
- Testori T, "Vertical root fractures in endodontically treated teeth : a clinical survey of 36 cases", J Endod, 19, pp.87~91 (1993)
- Soares CJ, "Influence of root embedment material and periodontal ligament simulation on fracture resistance tests", Braz Oral Res, 19, pp.11~16 (2005)
- Marchionatti AM, "Influence of periodontal ligament simulation on bond strength and fracture resistance of roots restored with fiber posts", J Appl Oral Sci, 22, pp.450~458 (2014)
- von Arx T, "Vertical root fractures of endodontically treated posterior teeth : a histologic analysis with clinical and radiographic correlates", Swiss Dent J, 127, pp.14~23 (2017)
- González-Lluch C, "Inclusion of the periodontal ligament in studies on the biomechanical behavior of fiber post-retained restorations : an in vitro study and three-dimensional finite element analysis", Proc Inst Mech Eng H, 230, pp.230~238 (2016)
- Yang HS, "The effects of dowel design and load direction on dowel-and-core restorations", J Prosthet Dent, 85, pp.558~567 (2001)
- Eraslan Ö, "Conservative restoration of severely damaged endodontically treated premolar teeth : a FEM study", Clin Oral Investig, 15, pp.403~408 (2011)
- Soares PV, "Fracture resistance and stress distribution in endodontically treated maxillary premolars restored with composite resin", J Prosthodont, 17, pp.114~119 (2008)