본문 바로가기
KERD
논문KCI 등재

Effect of ferrule on the fracture resistance of mandibular premolars with prefabricated posts and cores

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

초록

PURPOSE. This study evaluated fracture resistance with regard to ferrule lengths and post reinforcement on endodontically treated mandibular premolars incorporating a prefabricated post and resin core. MATERIALS AND METHODS. One hundred extracted mandibular premolars were randomly divided into 5 groups (n=20): intact teeth (NR); endodontically treated teeth (ETT) without post (NP); ETT restored with a prefabricated post with ferrule lengths of either 0 mm (F0), 1 mm (F1), or 2 mm (F2). Prepared teeth were restored with metalcrowns. A thermal cycling test was performed for 1,000 cycles. Loading was applied at an angle of 135 degrees to the axis of the tooth using a universal testing machine with a crosshead speed of 2.54 mm/min. Fracture loads were analyzed by one-way ANOVA and Tukey HSD test using a statistical program (α=.05). RESULTS. There were statistical differences in fracture loads among groups (P<.001). The fracture load of F2 (237.7 ± 83.4) was significantly higher than those of NP (155.6 ± 74.3 N), F0 (98.8 ± 43.3 N), and F1 (152.8 ± 78.5 N) (P=.011, P<.001, and P=.008, respectively). CONCLUSION. Fracture resistance of ETT depends on the length of the ferrule, as shown by the significantly increased fracture resistance in the 2 mm ferrule group (F2) compared to the groups with shorter ferrule lengths (F0, F1) and without post (NP).

Abstract

PURPOSE. This study evaluated fracture resistance with regard to ferrule lengths and post reinforcement on endodontically treated mandibular premolars incorporating a prefabricated post and resin core. MATERIALS AND METHODS. One hundred extracted mandibular premolars were randomly divided into 5 groups (n=20): intact teeth (NR); endodontically treated teeth (ETT) without post (NP); ETT restored with a prefabricated post with ferrule lengths of either 0 mm (F0), 1 mm (F1), or 2 mm (F2). Prepared teeth were restored with metalcrowns. A thermal cycling test was performed for 1,000 cycles. Loading was applied at an angle of 135 degrees to the axis of the tooth using a universal testing machine with a crosshead speed of 2.54 mm/min. Fracture loads were analyzed by one-way ANOVA and Tukey HSD test using a statistical program (α=.05). RESULTS. There were statistical differences in fracture loads among groups (P<.001). The fracture load of F2 (237.7 ± 83.4) was significantly higher than those of NP (155.6 ± 74.3 N), F0 (98.8 ± 43.3 N), and F1 (152.8 ± 78.5 N) (P=.011, P<.001, and P=.008, respectively). CONCLUSION. Fracture resistance of ETT depends on the length of the ferrule, as shown by the significantly increased fracture resistance in the 2 mm ferrule group (F2) compared to the groups with shorter ferrule lengths (F0, F1) and without post (NP).

참고문헌 (47)

  1. Tang W, "Identifying and reducing risks for potential fractures in endodontically treated teeth", J Endod, 36, pp.609~617 (2010)
  2. Al-Omiri MK, "Fracture resistance of teeth restored with post-retained restorations:an overview", J Endod, 36, pp.1439~1449 (2010)
  3. Fernandes AS, "Factors affecting the fracture resistance of post-core reconstructed teeth: a review", Int J Prosthodont, 14, pp.355~363 (2001)
  4. Schwartz RS, "Post placement and restoration of endodontically treated teeth: a literature review", J Endod, 30, pp.289~301 (2004)
  5. Mangold JT, "Influence of glass-fiber posts on the fracture resistance and failure pattern of endodontically treated premolars with varying substance loss: an in vitro study", J Prosthet Dent, 105, pp.387~393 (2011)
  6. Stankiewicz NR, "The ferrule effect: a literature review", Int Endod J, 35, pp.575~581 (2002)
  7. Tamse A, "An evaluation of endodontically treated vertically fractured teeth", J Endod, 25, pp.506~508 (1999)
  8. McLaren JD, "The effect of post type and length on the fracture resistance of endodontically treated teeth", J Prosthet Dent, 101, pp.174~182 (2009)
  9. Hayashi M, "Fracture resistance of pulpless teeth restored with post-cores and crowns", Dent Mater, 22, pp.477~485 (2006)
  10. Büttel L, "Influence of post fit and post length on fracture resistance", Int Endod J, 42, pp.47~53 (2009)
  11. Pereira JR, "Evaluation of push-out bond strength of four luting agents and SEM observation of the dentine", fibreglass bond interface, 2013, pp.46, 982~992
  12. Ibrahim AM, "Effect of remaining tooth structure on the fracture resistance of endodonticallytreated maxillary premolars: An in vitro study", J Prosthet Dent, 115, pp.290~295 (2016)
  13. Pereira JR, "Effect of a crown ferrule on the fracture resistance of endodontically treated teeth restored with prefabricated posts", J Prosthet Dent, 95, pp.50~54 (2006)
  14. Samran A, "The influence of substance loss and ferrule height on the fracture resistance of endodontically treated premolars. An in vitro study", Dent Mater, 29, pp.1280~1286 (2013)
  15. Forberger N, "Influence of the type of post and core on in vitro marginal continuity, fracture resistance, and fracture mode of lithia disilicate-based all-ceramic crowns", J Prosthet Dent, 100, pp.264~273 (2008)
  16. Gegauff AG., "Effect of crown lengthening and ferrule placement on static load failure of cemented cast post-cores and crowns", J Prosthet Dent, 84, pp.169~179 (2000)
  17. Zhi-Yue L, "Effects of post-core design and ferrule on fracture resistance of endodontically treated maxillary central incisors", J Prosthet Dent, 89, pp.368~373 (2003)
  18. Salameh Z, "Fracture resistance and failure patterns of endodontically treated mandibular molars with and without glass fiber post in combination with a zirconia-ceramic crown", J Dent, 36, pp.513~519 (2008)
  19. Cagidiaco MC, "Placement of fiber prefabricated or custom made posts affects the 3-year survival of endodontically treated premolars", Am J Dent, 21, pp.179~184 (2008)
  20. Sorensen JA, "Intracoronal reinforcement and coronal coverage: a study of endodontically treated teeth", J Prosthet Dent, 51, pp.780~784 (1984)
  21. Sorensen JA, "Ferrule design and fracture resistance of endodontically treated teeth", J Prosthet Dent, 63, pp.529~536 (1990)
  22. Fokkinga WA, "Ex vivo fracture resistance of direct resin composite complete crowns with and without posts on maxillary premolars", Int Endod J, 38, pp.230~237 (2005)
  23. Mohammadi N, "Effect of fiber post and cusp coverage on fracture resistance of endodontically treated maxillary premolars directly restored with composite resin", J Endod, 35, pp.1428~1432 (2009)
  24. Heydecke G, "Fracture strength and survival rate of endodontically treated maxillary incisors with approximal cavities after restoration with different post and core systems:an in-vitro study", J Dent, 29, pp.427~433 (2001)
  25. Guzy GE, "In vitro comparison of intact endodontically treated teeth with and without endo-post reinforcement", J Prosthet Dent, 42, pp.39~44 (1979)
  26. Hoag EP, "A comparative evaluation of three post and core techniques", J Prosthet Dent, 47, pp.177~181 (1982)
  27. Trope M, "Resistance to fracture of restored endodontically treated teeth", Endod Dent Traumatol, 1, pp.108~111 (1985)
  28. Stockton LW, "Factors affecting retention of post systems: a literature review", J Prosthet Dent, 81, pp.380~385 (1999)
  29. Torbjörner A, "A literature review on the prosthetic treatment of structurally compromised teeth", Int J Prosthodont, 17, pp.369~376 (2004)
  30. Standlee JP, "Retention of endodontic dowels: effects of cement, dowel length, diameter, and design", J Prosthet Dent, 39, pp.400~405 (1978)
  31. Ruemping DR, "Retention of dowels subjected to tensile and torsional forces", J Prosthet Dent, 41, pp.159~162 (1979)
  32. Sherfudhin H, "Effect of different ferrule designs on the fracture resistance and failure pattern of endodontically treated teeth restored with fiber posts and all-ceramic crowns", J Appl Oral Sci, 19, pp.28~33 (2011)
  33. Ng CC, "Influence of remaining coronal tooth structure location on the fracture resistance of restored endodontically treated anterior teeth", J Prosthet Dent, 95, pp.290~296 (2006)
  34. Aykent F, "Effect of dentin bonding and ferrule preparation on the fracture strength of crowned teeth restored with dowels and amalgam cores", J Prosthet Dent, 95, pp.297~301 (2006)
  35. Arunpraditkul S, "Fracture resistance of endodontically treated teeth: three walls versus four walls of remaining coronal tooth structure", J Prosthodont, 18, pp.49~53 (2009)
  36. Akkayan B, "An in vitro study evaluating the effect of ferrule length on fracture resistance of endodontically treated teeth restored with fiber-reinforced and zirconia dowel systems", J Prosthet Dent, 92, pp.155~162 (2004)
  37. Wagnild G, "The restoration of the endodontically treated tooth", pp.765~794 (2002), Mosby
  38. Tan PL, "In vitro fracture resistance of endodontically treated central incisors with varying ferrule heights and configurations", J Prosthet Dent, 93, pp.331~336 (2005)
  39. Santos-Filho PC, "Influence of ferrule, post system, and length on biomechanical behavior of endodontically treated anterior teeth", J Endod, 40, pp.119~123 (2014)
  40. Torbjörner A, "Survival rate and failure characteristics for two post designs", J Prosthet Dent, 73, pp.439~444 (1995)
  41. Samran A, "Effect of ferrule location on the fracture resistance of crowned mandibular premolars: An in vitro study", J Prosthet Dent, 114, pp.86~91 (2015)
  42. Lindemuth JS, "Effect of restoration size on fracture resistance of bonded amalgam restorations", Oper Dent, 25, pp.177~181 (2000)
  43. Görücü J, "Fracture resistance of teeth with Class II bonded amalgam and new tooth-colored restorations", Oper Dent, 28, pp.501~507 (2003)
  44. Barcellos RR, "Fracture resistance of endodontically treated teeth restored with intra-radicular post: the effects of post system and dentine thickness", J Biomech, 46, pp.2572~2577 (2013)
  45. Wegner PK, "Survival rate of endodontically treated teeth with posts after prosthetic restoration", J Endod, 32, pp.928~931 (2006)
  46. Sorensen JA, "Endodontically treated teeth as abutments", J Prosthet Dent, 53, pp.631~636 (1985)
  47. Reynolds JM., "Abutment selection for fixed prosthodontics", J Prosthet Dent, 19, pp.483~488 (1968)

관련 논문AI추천

Influence of modification in core building procedure on fracture strength and failure patterns of premolars restored with fiber post and composite core김영회, 이종혁대한치과보철학회 · The Journal of Advanced of Prosthodontics2012 · 제4권 제1호Fracture resistance of upper central incisors restored with different posts and coresKamran Amirian Chaijan, Saeid Tavanafar, Saeid Tavanafar,대한치과보존학회 · Restorative Dentistry and Endodontics2015 · 제40권 제3호A comparison of the fracture resistances of endodontically treated mandibular premolars restored with endocrowns and glass fiber postcore retained conventional crownsChaoyang Sun, Erdong Gao, Hongbo Li, Jing Guo, Xuesheng Li, Zhiming Wang대한치과보철학회 · The Journal of Advanced of Prosthodontics2016 · 제8권 제6호Fracture resistances of zirconia, cast Ni-Cr, and fiber-glass composite posts under all-ceramic crowns in endodontically treated premolarsHabib Hajmiragha, Hamid Reza Rajati, Mohamadjavad Kharazifard, Sareh Habibzadeh, Shima Esmailzadeh대한치과보철학회 · The Journal of Advanced of Prosthodontics2017 · 제9권 제3호A comparative evaluation of fracture resistance of endodontically treated teeth restored with different post core systems - an in-vitro studyChetana S. Makade, Ganesh K. Meshram, Manjusha Warhadpande, Pravinkumar G. Patil대한치과보철학회 · The Journal of Advanced of Prosthodontics2011 · 제3권 제2호Fracture resistance of endodontically treated canines restored with different sizes of fiber post and all-ceramic crownsBuket Akalin, Hasan Necdet Alkumru, Sebnem Begum Turker대한치과보철학회 · The Journal of Advanced of Prosthodontics2016 · 제8권 제2호

이 간행물의 다른 논문 (11건)