Cell attachment and proliferation of bone marrow-derived osteoblast on zirconia of various surface treatment
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. This study was performed to characterize the effects of zirconia coated with calcium phosphate and hydroxyapatite compared to smooth zirconia after bone marrow-derived osteoblast culture. MATERIALS AND METHODS. Bone marrow-derived osteoblasts were cultured on (1) smooth zirconia, (2) zirconia coated with calcium phosphate (CaP), and (3) zirconia coated with hydroxyapatite (HA). The tetrazolium-based colorimetric assay (MTT test) was used for cell proliferation evaluation. Scanning electron microscopy (SEM) and alkalinephosphatase (ALP) activity was measured to evaluate the cellular morphology and differentiation rate. X-ray photoelectron spectroscopy (XPS) was employed for the analysis of surface chemistry. The genetic expression of the osteoblasts and dissolution behavior of the coatings were observed. Assessment of the significance level of the differences between the groups was done with analysis of variance (ANOVA). RESULTS. From the MTT assay, no significant difference between smooth and surface coated zirconia was found (P>.05). From the SEM image, cells on all three groups of discs were sporadically triangular or spread out in shape with formation of filopodia. From the ALP activity assay, the optical density of osteoblasts on smooth zirconia discs was higher than that on surface treated zirconia discs (P>.05). Most of the genes related to cell adhesion showed similar expression level between smooth and surface treated zirconia. The dissolution rate was higher with CaP than HA coating. CONCLUSION. The attachment and growth behavior of bone-marrow-derived osteoblasts cultured on smooth surface coated zirconia showed comparable results. However, the HA coating showed more time-dependentstability compared to the CaP coating.
Abstract
PURPOSE. This study was performed to characterize the effects of zirconia coated with calcium phosphate and hydroxyapatite compared to smooth zirconia after bone marrow-derived osteoblast culture. MATERIALS AND METHODS. Bone marrow-derived osteoblasts were cultured on (1) smooth zirconia, (2) zirconia coated with calcium phosphate (CaP), and (3) zirconia coated with hydroxyapatite (HA). The tetrazolium-based colorimetric assay (MTT test) was used for cell proliferation evaluation. Scanning electron microscopy (SEM) and alkalinephosphatase (ALP) activity was measured to evaluate the cellular morphology and differentiation rate. X-ray photoelectron spectroscopy (XPS) was employed for the analysis of surface chemistry. The genetic expression of the osteoblasts and dissolution behavior of the coatings were observed. Assessment of the significance level of the differences between the groups was done with analysis of variance (ANOVA). RESULTS. From the MTT assay, no significant difference between smooth and surface coated zirconia was found (P>.05). From the SEM image, cells on all three groups of discs were sporadically triangular or spread out in shape with formation of filopodia. From the ALP activity assay, the optical density of osteoblasts on smooth zirconia discs was higher than that on surface treated zirconia discs (P>.05). Most of the genes related to cell adhesion showed similar expression level between smooth and surface treated zirconia. The dissolution rate was higher with CaP than HA coating. CONCLUSION. The attachment and growth behavior of bone-marrow-derived osteoblasts cultured on smooth surface coated zirconia showed comparable results. However, the HA coating showed more time-dependentstability compared to the CaP coating.
참고문헌 (29)
- Pae A., "Attachment and growth behaviour of human gingival fibroblasts on titanium and zirconia ceramic surfaces", Biomed Mater, 4, pp.025005~ (2009)
- Mustafa K., "Attachment and proliferation of human oral fibroblasts to titanium surfaces blasted with TiO2 particles. A scanning electron microscopic and histomorphometric analysis", Clin Oral Implants Res, 9, pp.195~207 (1998)
- Pae A., "Osteoblast-like cell attachment and proliferation on turned, blasted, and anodized titanium surfaces", Int J Oral Maxillofac Implants, 26, pp.475~481 (2011)
- Orsini G., "Surface analysis of machined versus sandblasted and acidetched titanium implants", Int J Oral Maxillofac Implants, 15, pp.779~784 (2000)
- Bächle M., "Behavior of CAL72 osteoblast-like cells cultured on zirconia ceramics with different surface topographies", Clin Oral Implants Res, 18, pp.53~59 (2007)
- Gahlert M., "Biomechanical and histomorphometric comparison between zirconia implants with varying surface textures and a titanium implant in the maxilla of miniature pigs", Clin Oral Implants Res, 18, pp.662~668 (2007)
- Ichikawa Y., "Tissue compatibility and stability of a new zirconia ceramic in vivo", J Prosthet Dent, 68, pp.322~326 (1992)
- Josset Y., "In vitro reactions of human osteoblasts in culture with zirconia and alumina ceramics", J Biomed Mater Res, 47, pp.481~493 (1999)
- Scarano A., "Bacterial adhesion on commercially pure titanium and zirconium oxide disks : an in vivo human study", J Periodontol, 75, pp.292~296 (2004)
- Rimondini L., "Bacterial colonization of zirconia ceramic surfaces : an in vitro and in vivo study", Int J Oral Maxillofac Implants, 17, pp.793~798 (2002)
- Degidi M., "Inflammatory infiltrate, microvessel density, nitric oxide synthase expression, vascular endothelial growth factor expression, and proliferative activity in peri-implant soft tissues around titanium and zirconium oxide healing caps", J Periodontol, 77, pp.73~80 (2006)
- Ismail FS., "The influence of surface chemistry and topography on the contact guidance of MG63 osteoblast cells", J Mater Sci Mater Med, 18, pp.705~714 (2007)
- Mustafa K., "Influence of modifying and veneering the surface of ceramic abutments on cellular attachment and proliferation", Clin Oral Implants Res, 19, pp.1178~1187 (2008)
- Hulbert SF., "Potential of ceramic materials as permanently implantable skeletal prostheses", J Biomed Mater Res, 4, pp.433~456 (1970)
- Maniatopoulos C., "Bone formation in vitro by stromal cells obtained from bone marrow of young adult rats", Cell Tissue Res, 254, pp.317~330 (1988)
- Kim HW., "Sol-gel derived fluor-hydroxyapatite biocoatings on zirconia substrate", Biomaterials, 25, pp.2919~2926 (2004)
- Takemoto M., "Bone-bonding ability of a hydroxyapatite coated zirconia-alumina nanocomposite with a microporous surface", J Biomed Mater Res A, 78, pp.693~701 (2006)
- Boyan BD., "Titanium surface roughness alters responsiveness of MG63 osteoblastlike cells to 1 alpha, 25-(OH)2D3", J Biomed Mater Res, 39, pp.77~85 (1998)
- Jarcho M., "Calcium phosphate ceramics as hard tissue prosthetics", Clin Orthop Relat Res, 157, pp.259~278 (1981)
- Sennerby L., "Bone tissue responses to surface-modified zirconia implants: A histomorphometric and removal torque study in the rabbit", Clin Implant Dent Relat Res, 7, pp.S13~S20 (2005)
- Wang G., "Microstructure, bioactivity and osteoblast behavior of monoclinic zirconia coating with nanostructured surface", Acta Biomater, 6, pp.990~1000 (2010)
- Sun L., "Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings : a review", J Biomed Mater Res, 58, pp.570~592 (2001)
- Zeng H., "The study of surface transformation of pulsed laser deposited hydroxyapatite coatings", J Biomed Mater Res, 50, pp.239~247 (2000)
- de Groot K., "Mechanical failure of artificial teeth made of dense calcium hydroxyapatite", Sci Ceram, 11, pp.433~437 (1981)
- Cui FZ., "Highly adhesive hydroxyapatite coatings on titanium alloy formed by ion beam assisted deposition", J Mater Sci Mater Med, 8, pp.403~405 (1997)
- Benzaid R., "Fracture toughness, strength and slow crack growth in a ceria stabilized zirconia-alumina nanocomposite for medical applications", Biomaterials, 29, pp.3636~3641 (2008)
- Piattelli A., "Residual aluminum oxide on the surface of titanium implants has no effect on osseointegration", Biomaterials, 24, pp.4081~4089 (2003)
- Zinelis S., "Surface characterization of zirconia dental implants", Dent Mater, 26, pp.295~305 (2010)
- Jha LJ., "Preparation and characterization of fluoride-substituted apatites", J Mater Sci Mater Med, 8, pp.185~191 (1997)