Evaluation of the color reproducibility of all-ceramic restorations fabricated by the digital veneering method
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The objective of this study was to evaluate the clinical acceptability of all-ceramic crowns fabricated by the digital veneering method vis-à-vis the traditional method. MATERIALS AND METHODS. Zirconia specimens manufactures by two different manufacturing method, conventional vs digital veneering, with three different thickness (0.3 mm, 0.5 mm, 0.7 mm) were prepared for analysis. Color measurement was performed using a spectrophotometer for the prepared specimens. The differences in shade in relation to the build-upmethod were calculated by quantifying ΔE* (mean color difference), with the use of color difference equations representing the distance from the measured values L*, a*, and b*, to the three-dimensional space of two colors. Two-way analysis of variance (ANOVA) combined with a Tukey multiple-range test was used to analyze the data (α=0.05). RESULTS. In comparing means and standard deviations of L*, a*, and b* color values there was no significant difference by the manufacturing method and zirconia core thickness according to a two-way ANOVA. The color differences between two manufacturing methods were in a clinically acceptable range less than or equal to 3.7 in all the specimens. CONCLUSION. Based on the results of this study, a carefully consideration is necessary while selecting upper porcelain materials, even if it is performed on a small scale. However, because the color reproducibility of the digital veneering system was within the clinically acceptable range when comparing with conventional layering system, it was possible to estimate the possibility of successful aesthetic prostheses in the latest technology.
Abstract
PURPOSE. The objective of this study was to evaluate the clinical acceptability of all-ceramic crowns fabricated by the digital veneering method vis-à-vis the traditional method. MATERIALS AND METHODS. Zirconia specimens manufactures by two different manufacturing method, conventional vs digital veneering, with three different thickness (0.3 mm, 0.5 mm, 0.7 mm) were prepared for analysis. Color measurement was performed using a spectrophotometer for the prepared specimens. The differences in shade in relation to the build-upmethod were calculated by quantifying ΔE* (mean color difference), with the use of color difference equations representing the distance from the measured values L*, a*, and b*, to the three-dimensional space of two colors. Two-way analysis of variance (ANOVA) combined with a Tukey multiple-range test was used to analyze the data (α=0.05). RESULTS. In comparing means and standard deviations of L*, a*, and b* color values there was no significant difference by the manufacturing method and zirconia core thickness according to a two-way ANOVA. The color differences between two manufacturing methods were in a clinically acceptable range less than or equal to 3.7 in all the specimens. CONCLUSION. Based on the results of this study, a carefully consideration is necessary while selecting upper porcelain materials, even if it is performed on a small scale. However, because the color reproducibility of the digital veneering system was within the clinically acceptable range when comparing with conventional layering system, it was possible to estimate the possibility of successful aesthetic prostheses in the latest technology.
참고문헌 (22)
- Preston JD., "Current status of shade selection and color matching", Quintessence Int, 16, pp.47~58 (1985)
- Dozić A., "The influence of porcelain layer thickness on the final shade of ceramic restorations", J Prosthet Dent, 90, pp.563~570 (2003)
- Seghi RR., "Spectrophotometric analysis of color differences between porcelain systems", J Prosthet Dent, 56, pp.35~40 (1986)
- O'Brien WJ., "Sources of color variation on firing porcelain", Dent Mater, 7, pp.170~173 (1991)
- Guazzato M., "Strength, fracture toughness and microstructure of a selection of allceramic materials. Part II. Zirconia-based dental ceramics", Dent Mater, 20, pp.449~456 (2004)
- Braga RR., "Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin", Dent Mater, 16, pp.303~310 (2000)
- Aboushelib MN., "Effect of zirconia type on its bond strength with different veneer ceramics", J Prosthodont, 17, pp.401~408 (2008)
- 최유성, "In vitro evaluation of fracture strength of zirconia restoration veneered with various ceramic materials", The Journal of Advanced of Prosthodontics, 4(3), pp.162~169 (2012), 대한치과보철학회[DOI]
- Hochman N., "New all-ceramic indirect post-andcore system", J Prosthet Dent, 81, pp.625~629 (1999)
- Douglas RD., "Predicting porcelain thickness required for dental shade matches", J Prosthet Dent, 82, pp.143~149 (1999)
- Heffernan MJ., "Relative translucency of six all-ceramic systems. Part I : core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- O'Brien WJ., "A new, small-color-difference equation for dental shades", J Dent Res, 69, pp.1762~1764 (1990)
- Johnston WM., "Assessment of appearance match by visual observation and clinical colorimetry", J Dent Res, 68, pp.819~822 (1989)
- Shotwell JL., "Color stability of longterm soft denture liners", J Prosthet Dent, 68, pp.836~838 (1992)
- Douglas RD., "Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch", J Prosthet Dent, 97, pp.200~208 (2007)
- Preston JD., "Current status of shade selection and color matching", Quintessence Int, 16, pp.47~58 (1985)
- Kelly JR., "Ceramics in dentistry : historical roots and current perspectives", J Prosthet Dent, 75, pp.18~32 (1996)
- Knispel G., "Factors affecting the process of color matching restorative materials to natural teeth", Quintessence Int, 22, pp.525~531 (1991)
- Fasbinder DJ., "Digital dentistry: innovation for restorative treatment", Compend Contin Educ Dent, 31, pp.2~11 (2010)
- Luo XP., "Effect of veneering techniques on color and translucency of Y-TZP", J Prosthodont, 19, pp.465~470 (2010)
- Lee YK., "Layered color of all-ceramic core and veneer ceramics", J Prosthet Dent, 97, pp.279~286 (2007)
- Lund PS., "Color changes of porcelain surface colorants resulting from firing", Int J Prosthodont, 5, pp.22~27 (1992)