고정성 임시 보철물 재료의 색 안정성에 대한 절삭 및 적층가공법의 비교평가
Comparative evaluation of the subtractive and additive manufacturing on the color stability of fixed provisional prosthesis materials
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
목적: 본 연구의 목적은 CAD-CAM 방식 중 절삭가공과 적층가공으로 제작한 임시 보철 재료의 색 안정성을 비교 연구하는 것이다. 연구 재료 및 방법: 절삭가공을 통해 제작한 PMMA계열, DLP타입 프린터와 광경화성 수지를 이용해 적층가공으로 제작한 bis-acryl계열 그리고 전통적인 방법으로 제작한 PMMA계열의 시편을 각 20개씩 제작하였다. 시편을 커피용액과 와인용액에 침전시킨 후, 비색계를 이용하여 4주간 매주 색 측정을 시행하였다. 색 변화(ΔE*)값의 비교분석을 위해 One-way ANOVA와 사후 검정으로 Tukey test를 실시하였다(α = 0.05). 결과: 절삭가공을 통해 제작된 PMMA계열의 시편은 적층가공을 통해 제작된 bis-acryl계열의 시편에 비해 뛰어난 색 안정성을 보였고(P < 0.05), 전통적인 방법을 통해 제작된 PMMA계열의 시편과 유사한 색 안정성을 보였다(P > 0.05). 결론: 전치부와 같이 심미가 중요한 부위에서는 절삭가공을 통한 임시 보철물의 제작을 추천하며, 적층가공을 이용한 임시 보철물 제작 시에는 색 안정성에 대한 고려가 필요하다. (구강회복응용과학지 2021;37(2):73-80)
Abstract
Purpose: The purpose of this study is to compare the color stability of provisional restorative materials fabricated by subtractive and additive manufacturing. Materials and Methods: PMMA specimens by subtractive manufacturing and conventional method and bis-acryl specimens by additive manufacturing were fabricated each 20. After immersing specimens in the coffee solution and the wine solution, the color was measured as CIE Lab with a colorimeter weekly for 4 weeks. Color change was calculated and data were analyzed with one-way ANOVA and the Tukey multiple comparisons test (α = 0.05). Results: PMMA provisional prosthetic materials by subtractive manufacturing showed superior color stability compared to bis-acryl provisional prosthetic materials by additive manufacturing (P < 0.05), and showed similar color stability to the PMMA provisional prosthetic materials by conventional method (P > 0.05). Conclusion: It is recommended to fabricate provisional restorations by subtractive manufacturing in areas where esthetics is important, such as anterior teeth, and consideration of the color stability will be required when making provisional prosthetic using additive manufacturing. (J Dent Rehabil Appl Sci 2021;37(2):73-80)
참고문헌 (29)
- Nejatidanesh F, "Marginal accuracy of interim restorations fabricated from four interim autopolymerizing resins", J Prosthet Dent, 95, pp.364~367 (2006)
- Bello A, "A review of esthetic alternatives for the restoration of anterior teeth", J Prosthet Dent, 78, pp.437~440 (1997)
- Sham AS, "Color stability of provisional prosthodontic materials", J Prosthet Dent, 91, pp.447~452 (2004)
- Doray PG, "Color stability of provisional restorative materials after accelerated aging", J Prosthodont, 10, pp.212~216 (2001)
- Tallarico M, "Computerization and digital workflow in medicine : Focus on digital dentistry", Materials, 13, pp.2172~ (2020)
- Rayyan MM, "Comparison of interim restorations fabricated by CAD", CAM with those fabricated manually, 2015, pp.114, 414~419
- Almohareb T, "Influence of experimental staining on the color stability of indirect computer-aided design", computeraided manufacturing dental provisional materials, 2018, pp.12, 269~274
- Elagra MI, "Color stability and marginal integrity of interim crowns : An in vitro study", Eur J Dent, 11, pp.330~334 (2017)
- Shin JW, "Evaluation of the color stability of 3D-printed crown and bridge materials against various sources of discoloration : An in vitro study", Materials, 13, pp.5359~ (2020)
- Simon Gruber, "CAD", CAM Complete Denture Resins: An In Vitro Evaluation of Color Stability, 2021, pp.30(5), 430~439[DOI]
- Revilla-León M, "Color dimensions of additive manufactured interim restorative dental material", J Prosthet Dent, 123, pp.754~760 (2020)
- Rosentritt M, "In vivo color stability of resin composite veneers and acrylic resin teeth in removable partial dentures", Quintessence Int, 29, pp.517~522 (1998)
- 박진서, "시효처리가 폴리머 임시수복물 재료의 굽힘특성에 미치는 영향", 대한치과재료학회지, 40(3), pp.215~221 (2013), 대한치과재료학회
- Wyszecki G, "Color Science: Concepts and Methods, Quantitative Data and Formulae", pp.83~116 (2000), John Wiley and Sons
- Schulze KA, "Color stability and hardness in dental composites after accelerated aging", Dent Mater, 19, pp.612~619 (2003)
- Ruyter IE, "Color stability of dental composite resin materials for crown and bridge veneers", Dent Mater, 3, pp.246~251 (1987)
- Ruyter IE, "Remaining methacrylate groups in composite restorative materials", Acta Odontol Scand, 36, pp.75~82 (1978)
- Garcia CR, "Effects of extreme surface roughness on 3D printed horn antenna", Electron Lett, 49, pp.734~736 (2013)
- Ngo TD, "Additive manufacturing (3D printing): A review of materials, methods, applications and challenges", Compos B Eng, 143, pp.172~196 (2018)
- Vaezi M, "A review on 3D microadditive manufacturing technologies", Int J Adv Manuf Technol, 67, pp.1721~1754 (2013)
- Ferracane JL, "Ultraviolet light-induced yellowing of dental restorative resins", J Prosthet Dent, 54, pp.483~487 (1985)
- Abu-Bakr N, "Color stability of compomer after immersion in various media", J Esthet Dent, 12, pp.258~263 (2000)
- Asmussen E, "Factors affecting the color stability of restorative resins", Acta Odontol Scand, 41, pp.11~18 (1983)
- 박서진, "다양한 조성의 3D 프린팅 임시치관용 레진의 물성 비교", 대한치과재료학회지, 46(3), pp.139~152 (2019), 대한치과재료학회[DOI]
- Bertolo MV, "Influence of Photoinitiator System on Physical-Chemical Properties of Experimental Self-Adhesive Composites", Braz Dent J, 28, pp.35~39 (2017)
- Hadis MA, "Competitive light absorbers in photoactive dental resin-based materials", Dent Mater, 28, pp.831~841 (2012)
- Kim JE, "Color and Translucency Stability of Three-Dimensional Printable Dental Materials for Crown and Bridge Restorations", Materials, 14, pp.650~ (2021)
- Mazaro JVQ, "Evaluation of color stability of different temporary restorative materials", Rev Odontol UNESP, 44, pp.262~267 (2015)
- Berli C, "Comparing the mechanical properties of pressed, milled, and 3Dprinted resins for occlusal devices", J Prosthet Dent, 124, pp.780~786 (2020)