제작방법에 따른 임시 수복용 레진의 마모저항성에 관한 연구
In vitro evaluation of the wear resistance of provisional resin materials fabricated by different methods
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
목적: 본 연구의 목적은 적층 가공(additive manufacturing)법, 절삭 가공(subtractive manufacturing)법, 전통적인 방법에 따른 임시 수복용 레진의 마모 저항성을 조사하는 것이다. 재료 및 방법: 제작방법에 따라 4개의 군으로 나누었으며, 각 군은 전용의 임시 수복용 레진을 사용하였다: S3P군, Stereolithography apparatus (SLA) 3D 프린터 및 전용의 광경화성 수지로 제작한 군; D3P군, Digital Light Processing (DLP) 3D 프린터 및 전용의 광경화성 수지로 제작한 군; MIL군, Milling machine 및 밀링용 레진 블록으로 제작한 군; CON군, 전통적인 방법 및 자가중합형 레진으로 제작한 군. 한편, 3D 프린팅된 레진 시편을 제작함에 있어 적층 각도와 층 두께를 각각 0°와 100 μm로 설정하였다. 구강내 환경을 재현하기 위하여 열순환 처리와 수평, 수직운동이 가능한 2축 chewing simulator를 사용하였으며, 하부에는 한쪽면이 편평하게 제작된 임시 수복용 레진을, 상부에는 끝이 3 mm 직경을 가지는 원뿔형의 steatite를 고정하여 마모시험 진행하였다(5 kg, 30,000회, 0.8 Hz, 5°C/55°C). 임시 수복용 레진의 마모량은 마모 전후의 Standard Triangulated Language (STL) 파일과 전용의 CAD software를 이용하여 부피를 계산하였고, 주사전자현미경으로 마모 양상을 비교하였다. 결과: S3P군, D3P군, MIL군의 마모량은 CON군보다 유의하게 작았으며 (P < .05), S3P군, D3P군, MIL군 사이에는 통계학적으로 유의한 차이가 없었다 (P > .05). 주사전자현미경으로 마모면을 관찰한 결과, S3P군과 D3P군에서는 대합치의 운동 방향에 대해 수직적으로 갈라진 흔적이 발견되었다. MIL군에서는 전반적으로 균일한 마모면이 보인 반면, CON군에서는 대합치 운동 방향으로의 뚜렷한 마모 흔적과 다수의 기포가 관찰되었다. 결론: 본 연구의 한계 내에서, 3D 프린팅된 임시 수복용 레진은 치과용으로서 적절한 마모저항성을 보였다.
Abstract
Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to 0° and 100 μm, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, 5°C/55°C). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (α = .05). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.
참고문헌 (38)
- Takamizawa T, "Mechanical properties and simulated wear of provisional resin materials", Oper Dent, 40, pp.603~613 (2015)
- Gough M, "A review of temporary crowns and bridges", Dent Update, 21, pp.203~207 (1994)
- Fisher DW, "Indirect temporary restorations", J Am Dent Assoc, 82, pp.160~163 (1971)
- Melton D, "A comparison of two temporary restorations : light-cured resin versus a self-polymerizing temporary restoration", Oral Surg Oral Med Oral Pathol, 70, pp.221~225 (1990)
- Shillingburg HT, "Fundamentals of fixed prosthodontics", pp.149~163 (2012), Quintessence Publishing
- Nigel Tom T, "Provisional restorations : An overview of materials used", J Adv Clin Res Insights, 3, pp.212~214 (2016)
- van Dijken JW, "Direct resin composite inlays", onlays : an 11year follow-up, 2000, pp.28, 299~306
- 서현수, "완전 무치악에서 즉시 부하시와 표준 부하시 임플란트 생존율에 대한 비교 분석: 후향적 연구", 대한치과의사협회지, 52(12), pp.771~782 (2014), 대한치과의사협회[DOI]
- Bennani V, "Fabrication of an indirect-direct provisional fixed partial denture", J Prosthet Dent, 84, pp.364~365 (2000)
- Song KY, "Marginal adaptation of new provisional materials for fixed prosthodontics", J Dent Rehabil Appl Sci, 13, pp.247~255 (1997)
- 이상호, "의료 3D 프린팅 기술의 전망 및 소아치과분야에서의 활용", 대한소아치과학회지, 43(1), pp.93~108 (2016), 대한소아치과학회[DOI]
- Strub JR, "Computer-aided design and fabrication of dental restorations : current systems and future possibilities", J Am Dent Assoc, 137, pp.1289~1296 (2006)
- 김성준, "수종의 CAD", CAM 시스템으로 제작한 지르코니아 기반 완전도재관의 적합도 비교, 2009, pp.47(2), 148~155[DOI]
- van Noort R, "The future of dental devices is digital", Dent Mater, 28, pp.3~12 (2012)
- Landers R, "Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques", J Mater Sci, 37, pp.3107~3116 (2002)
- Barry B, "3-D printing : The new industrial revolution", Business Horizons, 55, pp.155~162 (2012)
- Santosa RE, "Provisional restoration options in implant dentistry", Aust Dent J, 52, pp.234~242 (2007)
- Givens EJ Jr, "Marginal adaptation and color stability of four provisional materials", J Prosthodont, 17, pp.97~101 (2008)
- Fox CW, "Provisional restorations for altered occlusions", J Prosthet Dent, 52, pp.567~572 (1984)
- Asefi S, "Fissure sealant materials : Wear resistance of flowable composite resins", J Dent Res Dent Clin Dent Prospects, 10, pp.194~199 (2016)
- Suwannaroop P, "In vitro wear resistance, hardness and elastic modulus of artificial denture teeth", Dent Mater J, 30, pp.461~468 (2011)
- Park JM, "Wear resistance of 3D printing resin material opposing zirconia and metal antagonists", Materials(Basel), 11, pp.1043~ (2018)
- Astudillo Rubio D, "Mechanical properties of provisional dental materials : A systematic review and meta-analysis", PLoS One, 13, pp.e0193162~ (2018)
- Tahayeri A, "3D printed versus conventionally cured provisional crown and bridge dental materials", Dent Mater, 34, pp.192~200 (2018)
- Alharbi N, "Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations", J Prosthet Dent, 115, pp.760~767 (2016)
- Digholkar S, "Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods", J Indian Prosthodont Soc, 16, pp.328~334 (2016)
- Alharbi N, "Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology", Int J Prosthodont, 29, pp.503~510 (2016)
- Lambrechts P, "Quantitative in vivo wear of human enamel", J Dent Res, 68, pp.1752~1754 (1989)
- 이현정, "법랑질에 의한 수종의 간접복합레진의 마모에 관한 연구", 대한치과보철학회지, 45(5), pp.611~620 (2007), 대한치과보철학회
- Kern M, "Wear of composite resin veneering materials in a dual-axis chewing simulator", J Oral Rehabil, 26, pp.372~378 (1999)
- Heintze SD, "Wear of ten dental restorative materials in five wear simulators--results of a round robin test", Dent Mater, 21, pp.304~317 (2005)
- DeLong R, "The wear of dental amalgam in an artificial mouth : a clinical correlation", Dent Mater, 1, pp.238~242 (1985)
- Alt V, "Fracture strength of temporary fixed partial dentures : CAD", CAM versus directly fabricated restorations, 2011, pp.27, 339~347
- Albashaireh ZS, "Two-body wear of different ceramic materials opposed to zirconia ceramic", J Prosthet Dent, 104, pp.105~113 (2010)
- Chadwick RG, "Thermocycling-the effects upon the compressive strength and abrasion resistance of three composite resins", J Oral Rehabil, 21, pp.533~543 (1994)
- Mair LH, "Wear: mechanisms, manifestations and measurement. Report of a workshop", J Dent, 24, pp.141~148 (1996)
- Bae EJ, "A comparative study of additive and subtractive manufacturing for dental restorations", J Prosthet Dent, 118, pp.187~193 (2017)
- 박찬, "3D 프린팅 방식의 적층방향에 따른 시제품의 기계적 특성 비교에 관한 연구", 한국생산제조학회지, 24(3), pp.334~341 (2015), 한국생산제조학회[DOI]