Comparison of fracture strength, surface hardness, and color stain of conventionally fabricated, 3D printed, and CAD-CAM milled interim prosthodontic materials after thermocycling

키워드

참고문헌 (48)

1. Shillingburg, HT, "Fundamentals of fixed prosthodontics", pp.225~256 (1997), Quintessence Publishing Co
2. Gupta G, "Evaluation of the effect of various beverages and food material on the color stability of provisional materials-An in vitro study", J Conserv Dent, 14, pp.287~292 (2011)
3. Burns DR, "A review of selected dental literature on contemporary provisional fixed prosthodontic treatment : report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics", J Prosthet Dent, 90, pp.474~497 (2003)
4. Alt V, "Fracture strength of temporary fixed partial dentures : CAD", CAM versus directly fabricated restorations, 2011, pp.27, 339~347
5. Poticny DJ, "CAD", CAM in-office technology : innovations after 25 years for predictable, esthetic outcomes, 2010, pp.141(Suppl 2), 5S~9S
6. Dawood A, "3D printing in dentistry", Br Dent J, 219, pp.521~529 (2015)
7. Abduo J, "Trends in computer-aided manufacturing in prosthodontics : a review of the available streams", Int J Dent, 2014, pp.783948~ (2014)
8. Bitencourt SB, "Long-term stainability of interim prosthetic materials in acidic", staining solutions, 2020, pp.32, 73~80
9. Rayyan MM, "Comparison of interim restorations fabricated by CAD", CAM with those fabricated manually, 2015, pp.114, 414~419
10. Song SY, "Color stability of provisional restorative materials with different fabrication methods", J Adv Prosthodont, 12, pp.259~264 (2020)
11. Alharbi A, "Stain susceptibility of composite and ceramic CAD", CAM blocks versus direct resin composites with different resinous matrices, 2017, pp.105, 162~169
12. Ash Jr, MM, "Wheeler’s dental anatomy, physiology, and occlusion", pp.141~151 (2010), Elsevier Inc
13. Swaney AC, "American Dental Association specification No. 12 for denture base resin : second revision", J Am Dent Assoc, 46, pp.54~66 (1953)
14. Tahayeri A, "3D printed versus conventionally cured provisional crown and bridge dental materials", Dent Mater, 34, pp.192~200 (2018)
15. Da Silva JD, "Clinical performance of a newly developed spectrophotometric system on tooth color reproduction", J Prosthet Dent, 99, pp.361~368 (2008)
16. Sharma G, "The CIEDE2000 color-difference formula : Implementation notes, supplementary test data, and mathematical observations. Color Res", Appl, 30, pp.21~30 (2005)
17. Paravina RD, "Color difference thresholds in dentistry", J Esthet Restor Dent, 27(Suppl 1), pp.S1~S9 (2015)
18. Sadid-Zadeh R, "Fracture strength of interim CAD", CAM and conventional partial fixed dental prostheses, 2021, pp.30, 720~724
19. Abdullah AO, "Comparative in vitro evaluation of CAD", CAM vs conventional provisional crowns, 2016, pp.24, 258~263
20. Abdullah AO, "Comparison between direct chairside and digitally fabricated temporary crowns", Dent Mater J, 37, pp.957~963 (2018)
21. Peñate L, "Comparative study of interim materials for direct fixed dental prostheses and their fabrication with CAD", CAM technique, 2015, pp.114, 248~253
22. Reeponmaha T, "Comparison of fracture strength after thermo-mechanical aging between provisional crowns made with CAD", CAM and conventional method, 2020, pp.12, 218~224
23. Rayyan MM, "Comparison of interim restorations fabricated by CAD", CAM with those fabricated manually, 2015, pp.114, 414~419
24. Karaman T, "Evaluation of the effects of finish line type and width on the fracture strength of provisional crowns", Odontology, 109, pp.76~81 (2021)
25. Nejatidanesh F, "Flexural strength of interim resin materials for fixed prosthodontics", J Prosthodont, 18, pp.507~511 (2009)
26. Lang R, "Fracture resistance of PMMA and resin matrix composite-based interim FPD materials", Int J Prosthodont, 16, pp.381~384 (2003)
27. Karaokutan I, "In vitro study of fracture strength of provisional crown materials", J Adv Prosthodont, 7, pp.27~31 (2015)
28. Basak SS, "Effect of thermocycling on microhardness of CAD-CAM provisional materials", Int J Appl Dent Sci, 6, pp.254~257 (2020)
29. Diaz-Arnold AM, "Microhardness of provisional fixed prosthodontic materials", J Prosthet Dent, 82, pp.525~528 (1999)
30. Digholkar S, "Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods", J Indian Prosthodont Soc, 16, pp.328~334 (2016)
31. Bitencourt SB, "Long-term stainability of interim prosthetic materials in acidic", staining solutions, 2020, pp.32, 73~80
32. Elagra MI, "Color stability and marginal integrity of interim crowns : An in vitro study", Eur J Dent, 11, pp.330~334 (2017)
33. Taşın S, "Comparison of surface roughness and color stainability of 3-dimensionally printed interim prosthodontic material with conventionally fabricated and CAD-CAM milled materials", J Prosthet Dent, 128, pp.1094~1101 (2022)
34. Anusavice KJ, "Phillips’ science of dental materials", pp.108~ (2012), Elsevier Health Sciences
35. Sham AS, "Color stability of provisional prosthodontic materials", J Prosthet Dent, 91, pp.447~452 (2004)
36. Ruyter IE, "Color stability of dental composite resin materials for crown and bridge veneers", Dent Mater, 3, pp.246~251 (1987)
37. Yannikakis SA, "Color stability of provisional resin restorative materials", J Prosthet Dent, 80, pp.533~539 (1998)
38. Anusavice KJ, "Phillips’ science of dental materials", pp.483~ (2012), Elsevier
39. Bayindir F, "The effect of staining solutions on the color stability of provisional prosthodontic materials", J Dent, 40(Suppl 2), pp.e41~e46 (2012)
40. Rosenstiel SF, "Contemporary fixed prosthodontics(E-Book)", pp.856~857 (2015), Elsevier Health Sciences
41. Haselton DR, "Color stability of provisional crown and fixed partial denture resins", J Prosthet Dent, 93, pp.70~75 (2005)
42. Luo MR, "The development of the CIE 2000 colour-difference formula : CIEDE2000", Color Res Appl, 26, pp.340~350 (2001)
43. Yılmaz Savaş T, "Effect of fabrication techniques on the optical properties of zirconia-based systems", J Prosthet Dent, 125, pp.528~ (2021)
44. Stawarczyk B, "Discoloration of manually fabricated resins and industrially fabricated CAD", CAM blocks versus glass-ceramic : effect of storage media, duration, and subsequent polishing, 2012, pp.31, 377~383
45. Revilla-León M, "Additive manufacturing technologies used for processing polymers : current status and potential application in prosthetic dentistry", J Prosthodont, 28, pp.146~158 (2019)
46. Shin JW, "Evaluation of the color stability of 3d-printed crown and bridge materials against various sources of discoloration : an in vitro study", Materials, 13, pp.5359~ (2020)
47. Shin DH, "Degree of conversion and color stability of the light curing resin with new photoinitiator systems", Dent Mater, 25, pp.1030~1038 (2009)
48. Berli C, "Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices", J Prosthet Dent, 124, pp.780~786 (2020)

관련 논문AI추천