The effects of alveolar bone loss and miniscrew position on initial tooth displacement during intrusion of the maxillary anterior teeth: Finite element analysis
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.[Korean J Orthod 2016;46(5):310-322]
Abstract
Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.[Korean J Orthod 2016;46(5):310-322]
참고문헌 (28)
- Kang DY, "Interdisciplinary treatment for an adult patient with anterior open bite, severe periodontitis, and intellectual disability", J Craniofac Surg, 26, pp.e240~e244 (2015)
- Serio FG, "Periodontal trauma and mobility. Diagnosis and treatment planning", Dent Clin North Am, 43, pp.37~44 (1999)
- Rohatgi S, "A study on clinical attachment loss and gingival inflammation as etiologic factors in pathologic tooth migration", Niger J Clin Pract, 14, pp.449~453 (2011)
- Towfighi PP, "Pathologic migration of anterior teeth in patients with moderate to severe periodontitis", J Periodontol, 68, pp.967~972 (1997)
- Kanomi R, "Mini-implant for orthodontic anchorage", J Clin Orthod, 31, pp.763~767 (1997)
- Nishimura M, "Nonextraction treatment with temporary skeletal anchorage devices to correct a Class II Division 2 malocclusion with excessive gingival display", Am J Orthod Dentofacial Orthop, 145, pp.85~94 (2014)
- Jin Hwan Choi, "Three-dimensional evaluation of maxillary anterior alveolar bone for optimal placement of miniscrew implants", 대한치과교정학회지, 44(2), pp.54~61 (2014), 대한치과교정학회
- Lee KJ, "Displacement pattern of the maxillary arch depending on miniscrew position in sliding mechanics", Am J Orthod Dentofacial Orthop, 140, pp.224~232 (2011)
- Cobo J, "Dentoalveolar stress from bodily tooth movement at different levels of bone loss", Am J Orthod Dentofacial Orthop, 110, pp.256~262 (1996)
- Cobo J, "Initial stress induced in periodontal tissue with diverse degrees of bone loss by an orthodontic force: tridimensional analysis by means of the finite element method", Am J Orthod Dentofacial Orthop, 104, pp.448~454 (1993)
- Cattaneo PM, "The finite element method: a tool to study orthodontic tooth movement", J Dent Res, 84, pp.428~433 (2005)
- Coolidge ED, "The thickness of the human periodontal membrane", J Am Dent Assoc, 24, pp.1260~1270 (1937)
- Kronfeld R, "Histologic study of the influence of function on the human periodontal membrane", J Am Dent Assoc, 18, pp.1242~1274 (1931)
- 박현경, "교정용 미니스크류를 이용한 하악 전치 함입 시 변위양상의 3차원 유한요소분석", 대한치과교정학회지, 41(6), pp.384~398 (2011), 대한치과교정학회
- Eui-Hyang Sung, "Distalization pattern of whole maxillary dentition according to force application points", 대한치과교정학회지, 45(1), pp.20~28 (2015), 대한치과교정학회
- Sung SJ, "A comparative evaluation of different compensating curves in the lingual and labial techniques using 3D FEM", Am J Orthod Dentofacial Orthop, 123, pp.441~450 (2003)
- Vollmer D, "Determination of the centre of resistance in an upper human canine and idealized tooth model", Eur J Orthod, 21, pp.633~648 (1999)
- Reimann S, "Biomechanical finite-element investigation of the position of the centre of resistance of the upper incisors", Eur J Orthod, 29, pp.219~224 (2007)
- 이언화, "교정용 미니스크류를 이용한 연속호선과 분절호선의 유한요소분석", 대한치과교정학회지, 41(4), pp.227~253 (2011), 대한치과교정학회
- 모성서, "Torque control during lingual anterior retraction without posterior appliances", 대한치과교정학회지, 43(1), pp.3~14 (2013), 대한치과교정학회
- Burstone CR, "Deep overbite correction by intrusion", Am J Orthod, 72, pp.1~22 (1977)
- Ricketts RM, "Bioprogressive therapy as an answer to orthodontic needs. Part I", Am J Orthod, 70, pp.241~268 (1976)
- Smith RJ, "Mechanics of tooth movement", Am J Orthod, 85, pp.294~307 (1984)
- Polat-Ozsoy O, "Miniscrews for upper incisor intrusion", Eur J Orthod, 31, pp.412~416 (2009)
- Sia S, "Determining the center of resistance of maxillary anterior teeth subjected to retraction forces in sliding mechanics. An in vivo study", Angle Orthod, 77, pp.999~1003 (2007)
- 성상진, "치조골 상실에 따른 상악 치아군 저항중심의 변화에 관한 유한요소해석", 대한치과교정학회지, 39(5), pp.278~288 (2009), 대한치과교정학회
- Dermaut LR, "Apical root resorption of upper incisors caused by intrusive tooth movement:a radiographic study", Am J Orthod Dentofacial Orthop, 90, pp.321~326 (1986)
- Parker RJ, "Directions of orthodontic tooth movements associated with external apical root resorption of the maxillary central incisor", Am J Orthod Dentofacial Orthop, 114, pp.677~683 (1998)