교정용 미니스크류를 이용한 하악 전치 함입 시 변위양상의 3차원 유한요소분석
3-D FEA on the intrusion of mandibular anterior segment using orthodontic miniscrews
3
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
교정용 미니스크류를 이용하여 하악 전치의 함입이 가능하다고 알려져 있으나 분절의 크기에 따른 예측가능한 이동 양상에 대하여 보고된 바는 미미하다. 본 연구에서는 하악 4전치와 6전치 분절 모델에서 미니스크류와 훅의 위치를 달리하여 함입력을 적용하였을 때 응력분포와 초기 변위 양상을 분석하고자 하악 전치와 치주인대, 치조골에 대한 3차원 유한요소 모델을 제작하여 미니스크류 및 호선상 훅의 위치에 의해 결정되는 힘 벡터에 따른 치아의 3차원 각 평면에서의 변위량 및 von Mises 응력분포 양상을 비교하였다. 하악 4전치 분절에서는 함입력의 위치에 무관하게 공히 치관의 전방 경사가 발생하였으며 측절치 원심의 미니스크류와 후하방 힘을 가한 경우 경사 정도가 최소인 것으로 나타났다. 6전치 분절의 함입 시 견치 전방에 위치한 미니스크류에 의해 역시 상당한 치관의 전방 경사 및 순측 치경부 치근막에 von Mises stress가 집중되었으며 견치 후방에 위치한 미니스크류와 중절치-측절치 간 훅에 의한 힘에 의해 순수한 함입에 가까운 치아 변위 및 치근막 전체에 균일한 von Mises stress의 분포가 관찰되었다. 이러한 결과를 토대로 하악 전치의 함입이 요구되는 과개교합 증례에서 견치 원심측의 미니스크류와 중절치-측절치 간 훅을 이용한 후하방 힘에 의해 예측가능하게 하악 6전치의 순수한 함입을 유도할 수 있을 것으로 생각된다.
Abstract
Objective: The purpose of this study was to analyze the stress distribution and the displacement pattern of mandibular anterior teeth under various intrusive force vectors according to the position of orthodontic miniscrews and hooks, using three-dimensional finite element analysis. Methods: A three-dimensional finite element model was constructed to simulate mandibular teeth, periodontal ligament, and alveolar bone. The displacement of individual tooth on three-dimensional planes and the von Mises stress distribution were compared when various intrusion force vectors were applied. Results: Intrusive forces applied to 4 mandibular anterior teeth largely resulted in remarkable labial tipping of the segment according to the miniscrew position. All 6 mandibular anterior teeth were labially tipped and the stress concentrated on the labiogingival area by intrusive force from miniscrews placed mesial to the canine. The distointrusive force vector led to pure intrusion and the stress was evenly distributed in the whole periodontal ligament when the hook was placed between the central and lateral incisors and the miniscrew was placed distal to the canine. Conclusions: Within the limits of this study, it can be concluded that predictable pure intrusion of the 6 anterior teeth segment may be accomplished using miniscrews placed distal to the canine and hooks located between the central and lateral incisors.
참고문헌 (38)
- Dermaut LR, "Evaluation of intrusive mechanics of the type "segmented arch" on a macerated human skull using the laser reflection technique and holographic interferometry", Am J Orthod, 89, pp.251~263 (1986)
- Burstone CR, "Deep overbite correction by intrusion", Am J Orthod, 72, pp.1~22 (1977)
- Woods MG, "The mechanics of lower incisor intrusion: experiments in nongrowing baboons", Am J Orthod Dentofacial Orthop, 93, pp.186~195 (1988)
- Clifford PM, "The effects of increasing the reverse curve of Spee in a lower archwire examined using a dynamic photo-elastic gelatine model", Eur J Orthod, 21, pp.213~222 (1999)
- Dake ML, "A comparison of the Ricketts and Tweed-type arch leveling techniques", Am J Orthod Dentofacial Orthop, 95, pp.72~78 (1989)
- Greig DG, "Bioprogressive therapy: overbite reduction with the lower utility arch", Br J Orthod, 10, pp.214~216 (1983)
- Kanomi R, "Mini-implant for orthodontic anchorage", J Clin Orthod, 31, pp.763~767 (1997)
- Melsen B, "Miniscrew implants: the Aarhus anchorage system", Semin Orthod, 11, pp.24~31 (2005)
- Park YC, "Biomechanical principles in miniscrew-driven orthodontic. In: Temporary anchorage devices in orthodontics", pp.93~144 (2009), St Louis: Mosby Elsevier
- Yared KF, "Periodontal status of mandibular central incisors after orthodontic proclination in adults", Am J Orthod Dentofacial Orthop, 130(6), pp.e1~8 (2006)
- Rudolph DJ, "A finite element model of apical force distribution from orthodontic tooth movement", Angle Orthod, 71, pp.127~131 (2001)
- Tanne K, "Three-dimensional finite element analysis for stress in the periodontal tissue by orthodontic forces", Am J Orthod Dentofacial Orthop, 92, pp.499~505 (1987)
- Reimann S, "B Fig 7. 100 times magnification of axis change of 6 anterior teeth. iomechanical finite-element investigation of the position of the centre of resistance of the upper incisors", Eur J Orthod, 29, pp.219~224 (2007)
- Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
- Yang SD, "Evaluation and establishment of occlusal plane in clinical orthodontics", J Korean Found Gnatho-Orthod Res, 5, pp.5~38 (2001)
- Choi B, "Assessment of the relationships among posture, maxillomandibular denture complex, and soft-tissue profile of aesthetic adult Korean women", J Craniofac Surg, 11, pp.586~594 (2000)
- Arnett GW, "Soft tissue cephalometric analysis: diagnosis and treatment planning of dentofacial deformity", Am J Orthod Dentofacial Orthop, 116, pp.239~253 (1999)
- Coolidge ED, "The thickness of the human periodontal mem-brane", J Am Dent Assoc, 24, pp.1260~1267 (1937)
- 정광모, "상악 치아군의 저항중심의 위치에 관한 3차원 유한요소 해석", 대한치과교정학회지, 39(2), pp.83~94 (2009), 대한치과교정학회
- Sung SJ, "A comparative evaluation of different compensating curves in the lingual and labial techniques using 3D FEM", Am J Orthod Dentofacial Orthop, 123, pp.441~450 (2003)
- Andrews LF, "The straight-wire appliance, explained and compared", J Clin Orthod, 10, pp.174~195 (1976)
- 이수경, "하악 피질골과 연조직의 해부학적 두께를 위한 정량적 평가", 대한치과교정학회지, 37(3), pp.212~219 (2007), 대한치과교정학회
- Park YC, "New development in the segmented arch technique", J Korean Dent Assoc, 24, pp.499~505 (1986)
- Shroff B, "Simultaneous intrusion and retraction using a three-piece base arch", Angle Orthod, 67, pp.455~461 (1997)
- 김동우, "분절호선법으로 상하악 절치부 압하 시 순측경사도가 미치는 영향에 관한 3차원 유한요소법적 연구", 대한치과교정학회지, 33(4), pp.259~277 (2003), 대한치과교정학회
- Nauert K, "Evaluation of labio-lingual bony support of lower incisors in orthodontically untreated adults with the help of computed tomography", J Orofac Orthop, 60, pp.321~334 (1999)
- Wainwright WM, "Faciolingual tooth movement: its influence on the root and cortical plate", Am J Orthod, 64, pp.278~302 (1973)
- Hixon EH, "On force and tooth movement", Am J Orthod, 57, pp.476~478 (1970)
- Cobo J, "Initial stress induced in periodontal tissue with diverse degrees of bone loss by an orthodontic force: tridimensional analysis by means of the finite element method", Am J Orthod Dentofacial Orthop, 104, pp.448~454 (1993)
- Matsui S, "Center of resistance of anterior arch segment", Am J Orthod Dentofacial Orthop, 118, pp.171~178 (2000)
- Pedersen E, "Location of centres of resistance for maxillary anterior teeth measured on human autopsy material", Eur J Orthod, 13, pp.452~458 (1991)
- Vanden Bulcke MM, "Location of the centers of resistance for anterior teeth during retraction using the laser reflection technique", Am J Orthod Dentofacial Orthop, 91, pp.375~384 (1987)
- Burstone CJ, "Biomechanics of deep overbite correction", Semin Orthod, 7, pp.26~33 (2001)
- Martinelli FL, "Anatomic variability in alveolar sites for skeletal anchorage", Am J Orthod Dentofacial Orthop, 138(252), pp.e1~9 (2010)
- Choy K, "Effect of root and bone morphology on the stress distribution in the periodontal ligament", Am J Orthod Dentofacial Orthop, 117, pp.98~105 (2000)
- Tanne K, "Patterns of initial tooth displacements associated with various root lengths and alveolar bone heights", Am J Orthod Dentofacial Orthop, 100, pp.66~71 (1991)
- Koenig HA, "Force systems from an ideal arch--large deflection considerations", Angle Orthod, 59, pp.11~16 (1989)
- 이기준, "치아교정용 호선의 굽힘 영향 예측", 한국기계가공학회지, 9(6), pp.95~100 (2010), 한국기계가공학회