Distalization pattern of whole maxillary dentition according to force application points
2
조회
0
다운로드
17
인용
0
참고문헌
키워드
초록
Objective: The purpose of this study was to observe stress distribution and displacement patterns of the entire maxillary arch with regard to distalizing force vectors applied from interdental miniscrews. Methods: A standard three-dimensional finite element model was constructed to simulate the maxillary teeth, periodontal ligament, and alveolar process. The displacement of each tooth was calculated on x, y, and z axes, and the von Mises stress distribution was visualized using color-coded scales. Results: A single distalizing force at the archwire level induced lingual inclination of the anterior segment, and slight intrusive distal tipping of the posterior segment. In contrast, force at the high level of the retraction hook resulted in lingual root movement of the anterior segment, and extrusive distal translation of the posterior segment. As the force application point was located posteriorly along the archwire, the likelihood of extrusive lingual inclination of the anterior segment increased, and the vertical component of the force led to intrusion and buccal tipping of the posterior segment. Rotation of the occlusal plane was dependent on the relationship between the line of force and the possible center of resistance of the entire arch. Conclusions: Displacement of the entire arch may be dictated by a direct relationship between the center of resistance of the whole arch and the line of action generated between the miniscrews and force application points at the archwire, which makes the total arch movement highly predictable. [Korean J Orthod 2015;45(1):20-28]
Abstract
Objective: The purpose of this study was to observe stress distribution and displacement patterns of the entire maxillary arch with regard to distalizing force vectors applied from interdental miniscrews. Methods: A standard three-dimensional finite element model was constructed to simulate the maxillary teeth, periodontal ligament, and alveolar process. The displacement of each tooth was calculated on x, y, and z axes, and the von Mises stress distribution was visualized using color-coded scales. Results: A single distalizing force at the archwire level induced lingual inclination of the anterior segment, and slight intrusive distal tipping of the posterior segment. In contrast, force at the high level of the retraction hook resulted in lingual root movement of the anterior segment, and extrusive distal translation of the posterior segment. As the force application point was located posteriorly along the archwire, the likelihood of extrusive lingual inclination of the anterior segment increased, and the vertical component of the force led to intrusion and buccal tipping of the posterior segment. Rotation of the occlusal plane was dependent on the relationship between the line of force and the possible center of resistance of the entire arch. Conclusions: Displacement of the entire arch may be dictated by a direct relationship between the center of resistance of the whole arch and the line of action generated between the miniscrews and force application points at the archwire, which makes the total arch movement highly predictable. [Korean J Orthod 2015;45(1):20-28]
참고문헌 (30)
- Lee KJ, "Uprighting mandibular second molars with direct miniscrew anchorage", J Clin Orthod, 41, pp.627~635 (2007)
- Park YC, "Intrusion of posterior teeth using mini-screw implants", Am J Orthod Dentofacial Orthop, 123, pp.690~694 (2003)
- Yamada K, "Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region", Angle Orthod, 79, pp.78~84 (2009)
- Byloff FK, "Distal molar movement using the pendulum appliance. Part 1: Clinical and radiological evaluation", Angle Orthod, 67, pp.249~260 (1997)
- Tominaga JY, "Optimal loading conditions for controlled movement of anterior teeth in sliding mechanics", Angle Orthod, 79, pp.1102~1107 (2009)
- Lee KJ, "Displacement pattern of the maxillary arch depending on miniscrew position in sliding mechanics", Am J Orthod Dentofacial Orthop, 140, pp.224~232 (2011)
- Chaconas SJ, "Force distribution comparisons of various retraction archwires", Angle Orthod, 59, pp.25~30 (1989)
- Billiet T, "Location of the centre of resistance of the upper dentition and the nasomaxillary complex. An experimental study", Eur J Orthod, 23, pp.263~273 (2001)
- Pedersen E, "Tooth displacement analysed on human autopsy material by means of a strain gauge technique", Eur J Orthod, 13, pp.65~74 (1991)
- Tanne K, "Patterns of initial tooth displacements associated with various root lengths and alveolar bone heights", Am J Orthod Dentofacial Orthop, 100, pp.66~71 (1991)
- Mo SS, "Factors controlling anterior torque with C-implants depend on en-masse retraction without posterior appliances: biocreative therapy type II technique", Am J Orthod Dentofacial Orthop, 139, pp.e183~191 (2011)
- Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
- Coolidge E., "The thickness of the human periodontal membrane", J Am Dent Assoc, 24, pp.1260~1267 (1937)
- Block PL, "Restorative margins and periodontal health: a new look at an old perspective", J Prosthet Dent, 57, pp.683~689 (1987)
- Sung SJ, "A comparative evaluation of different compensating curves in the lingual and labial techniques using 3D FEM", Am J Orthod Dentofacial Orthop, 123, pp.441~450 (2003)
- Reimann S, "Biomechanical finite-element investigation of the position of the centre of resistance of the upper incisors", Eur J Orthod, 29, pp.219~224 (2007)
- Tanne K, "Three-dimensional finite element analysis for stress in the periodontal tissue by orthodontic forces", Am J Orthod Dentofacial Orthop, 92, pp.499~505 (1987)
- Burstone CJ, "Force systems from an ideal arch", Am J Orthod, 65, pp.270~289 (1974)
- Cattaneo PM, "The finite element method: a tool to study orthodontic tooth movement", J Dent Res, 84, pp.428~433 (2005)
- Gröning F, "The effects of the periodontal ligament on mandibular stiffness:a study combining finite element analysis and geometric morphometrics", J Biomech, 44, pp.1304~1312 (2011)
- McGuinness NJ, "A stress analysis of the periodontal ligament under various orthodontic loadings", Eur J Orthod, 13, pp.231~242 (1991)
- Andersen KL, "Material parameters and stress profiles within the periodontal ligament", Am J Orthod Dentofacial Orthop, 99, pp.427~440 (1991)
- 정광모, "상악 치아군의 저항중심의 위치에 관한 3차원 유한요소 해석", 대한치과교정학회지, 39(2), pp.83~94 (2009), 대한치과교정학회
- Volchansky A, "Clinical crown height (length)--a review of published measurements", J Clin Periodontol, 28, pp.1085~1090 (2001)
- Tenenbaum H, "A clinical study of the width of the attached gingiva in the deciduous, transitional and permanent dentitions", J Clin Periodontol, 13, pp.270~275 (1986)
- Bechtold TE, "Distalization pattern of the maxillary arch depending on the number of orthodontic miniscrews", Angle Orthod, 83, pp.266~273 (2013)
- Choy K, "Effect of root and bone morphology on the stress distribution in the periodontal ligament", Am J Orthod Dentofacial Orthop, 117, pp.98~105 (2000)
- Baek MS, "Long-term stability of anterior open-bite treatment by intrusion of maxillary posterior teeth", Am J Orthod Dentofacial Orthop, 138, pp.396~ (2010)
- Park HS, "Nonextraction treatment of an open bite with microscrew implant anchorage", Am J Orthod Dentofacial Orthop, 130, pp.391~402 (2006)
- Park HS, "Nonextraction treatment with microscrew implants", Angle Orthod, 74, pp.539~549 (2004)