Effect of labiolingual inclination of a maxillary central incisor and surrounding alveolar bone loss on periodontal stress: A finite element analysis
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force (Mt/F) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations (5o, 10o, 15o, and 20o) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The Mt/F necessary for controlled tipping (Mt/Fcont) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, Mt/Fcont and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in Mt/Fcont and the length of the moment arm. When Mt/F was near Mt/Fcont, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.[Korean J Orthod 2016;46(3):155-162]
Abstract
Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force (Mt/F) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations (5o, 10o, 15o, and 20o) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The Mt/F necessary for controlled tipping (Mt/Fcont) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, Mt/Fcont and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in Mt/Fcont and the length of the moment arm. When Mt/F was near Mt/Fcont, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.[Korean J Orthod 2016;46(3):155-162]
참고문헌 (30)
- Gkantidis N, "The orthodontic-periodontic interrelationship in integrated treatment challenges: a systematic review", J Oral Rehabil, 37, pp.377~390 (2010)
- Towfighi PP, "Pathologic migration of anterior teeth in patients with moderate to severe periodontitis", J Periodontol, 68, pp.967~972 (1997)
- Cobo J, "Dentoalveolar stress from bodily tooth movement at different levels of bone loss", Am J Orthod Dentofacial Orthop, 110, pp.256~262 (1996)
- Cobo J, "Initial stress induced in periodontal tissue with diverse degrees of bone loss by an orthodontic force: tridimensional analysis by means of the finite element method", Am J Orthod Dentofacial Orthop, 104, pp.448~454 (1993)
- Geramy A, "Alveolar bone resorption and the center of resistance modification(3-D analysis by means of the finite element method)", Am J Orthod Dentofacial Orthop, 117, pp.399~405 (2000)
- Geramy A, "Initial stress produced in the periodontal membrane by orthodontic loads in the presence of varying loss of alveolar bone: a three-dimensional finite element analysis", Eur J Orthod, 24, pp.21~33 (2002)
- McLaughlin RP, "Systemized orthodontic treatment mechanics" (2001), Mosby
- Yu-lou Tian, "Alveolar bone thickness around maxillary central incisors of different inclination assessed with cone-beam computed tomography", 대한치과교정학회지, 45(5), pp.245~252 (2015), 대한치과교정학회
- Burstone CJ, "The mechanics of the segmented arch techniques", Angle Orthod, 36, pp.99~120 (1996)
- Cattaneo PM, "Moment-to-force ratio, center of rotation, and force level: a finite element study predicting their interdependency for simulated orthodontic loading regimens", Am J Orthod Dentofacial Orthop, 133, pp.681~689 (2008)
- Brezniak N, "Orthodontically induced inflammatory root resorption. Part II: The clinical aspects", Angle Orthod, 72, pp.180~184 (2002)
- Brezniak N, "Orthodontically induced inflammatory root resorption. Part I: The basic science aspects", Angle Orthod, 72, pp.175~179 (2002)
- Viecilli R, "Optimization of microCT data processing for modelling of dental structures in orthodontic studies", Comput Methods Biomech Biomed Engin, 10, pp.257~263 (2007)
- Viecilli RF, "Three-dimensional mechanical environment of orthodontic tooth movement and root resorption", Am J Orthod Dentofacial Orthop, 133, pp.791.e11~791.e26 (2008)
- Cheng LL, "Physical properties of root cementum: Part 13. Repair of root resorption 4 and 8 weeks after the application of continuous light and heavy forces for 4 weeks: a microcomputedtomography study", Am J Orthod Dentofacial Orthop, 136, pp.320~321 (2009)
- Richardson ER, "Comparative thickness of the human periodontal membrane of functioning versus nonfunctioning teeth", J Oral Med, 22, pp.120~126 (1967)
- Coolidge ED, "The thickness of human periodontal membrane", J Am Dent Assoc, 24, pp.1260~1270 (1937)
- 모성서, "Torque control during lingual anterior retraction without posterior appliances", 대한치과교정학회지, 43(1), pp.3~14 (2013), 대한치과교정학회
- Eui-Hyang Sung, "Distalization pattern of whole maxillary dentition according to force application points", 대한치과교정학회지, 45(1), pp.20~28 (2015), 대한치과교정학회
- Kanjanaouthai A, "Effect of the inclination of a maxillary central incisor on periodontal stress: finite element analysis", Angle Orthod, 82, pp.812~819 (2012)
- Tanne K, "Three-dimensional finite element analysis for stress in the periodontal tissue by orthodontic forces", Am J Orthod Dentofacial Orthop, 92, pp.499~505 (1987)
- Shaw AM, "Mechanical stress generated by orthodontic forces on apical root cementum: a finite element model", Orthod Craniofac Res, 7, pp.98~107 (2004)
- Brunsvold MA, "Pathologic tooth migration", J Periodontol, 76, pp.859~866 (2005)
- Sameshima GT, "Predicting and preventing root resorption: Part I. Diagnostic factors", Am J Orthod Dentofacial Orthop, 119, pp.505~510 (2001)
- Melsen B, "Adult orthodontics", pp.212~ (2012), Blackwell Publishing
- Siatkowski RE, "Optimal orthodontic space closure in adult patients", Dent Clin North Am, 40, pp.837~873 (1996)
- Tanne K, "Patterns of initial tooth displacements associated with various root lengths and alveolar bone heights", Am J Orthod Dentofacial Orthop, 100, pp.66~71 (1991)
- 성상진, "치조골 상실에 따른 상악 치아군 저항중심의 변화에 관한 유한요소해석", 대한치과교정학회지, 39(5), pp.278~288 (2009), 대한치과교정학회
- Parker RJ, "Directions of orthodontic tooth movements associated with external apical root resorption of the maxillary central incisor", Am J Orthod Dentofacial Orthop, 114, pp.677~683 (1998)
- Dermaut LR, "Apical root resorption of upper incisors caused by intrusive tooth movement:a radiographic study", Am J Orthod Dentofacial Orthop, 90, pp.321~326 (1986)