Biomechanical analysis for different mandibular total distalization methods with clear aligners: A finite element study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: The purpose of this finite element method (FEM) study was to analyze the biomechanical differences and tooth displacement patterns according to the traction direction, methods, and sites for total distalization of the mandibular dentition using clear aligner treatment (CAT). Methods: A finite element analysis was performed on four FEM models using different traction methods (via a precision cut hook or button) and traction sites (mandibular canine or first premolar). A distalization force of 1.5 N was applied to the traction site by changing the direction from –30 to +30° to the occlusal plane. The initial tooth displacement and von Mises stress on the clear aligners were analyzed. Results: All CAT-based total distalization groups showed an overall trend of clockwise or counterclockwise rotation of the occlusal plane as the force direction varied. Mesiodistal tipping of individual teeth was more prominent than that of bodily movements. The initial displacement pattern of the mandibular teeth was more predominant based on the traction site than on the traction method. The elastic deformation of clear aligners is attributed to unintentional lingual tipping or extrusion of the mandibular anterior teeth. Conclusions: The initial tooth displacement can vary according to different distalization strategies for CAT-based total distalization. Discreet application and biomechanical understanding of traction sites and directions are necessary for appropriate mandibular total distalization.
Abstract
Objective: The purpose of this finite element method (FEM) study was to analyze the biomechanical differences and tooth displacement patterns according to the traction direction, methods, and sites for total distalization of the mandibular dentition using clear aligner treatment (CAT). Methods: A finite element analysis was performed on four FEM models using different traction methods (via a precision cut hook or button) and traction sites (mandibular canine or first premolar). A distalization force of 1.5 N was applied to the traction site by changing the direction from –30 to +30° to the occlusal plane. The initial tooth displacement and von Mises stress on the clear aligners were analyzed. Results: All CAT-based total distalization groups showed an overall trend of clockwise or counterclockwise rotation of the occlusal plane as the force direction varied. Mesiodistal tipping of individual teeth was more prominent than that of bodily movements. The initial displacement pattern of the mandibular teeth was more predominant based on the traction site than on the traction method. The elastic deformation of clear aligners is attributed to unintentional lingual tipping or extrusion of the mandibular anterior teeth. Conclusions: The initial tooth displacement can vary according to different distalization strategies for CAT-based total distalization. Discreet application and biomechanical understanding of traction sites and directions are necessary for appropriate mandibular total distalization.
참고문헌 (27)
- Proffit W, "Contemporary orthodontics" (2018), Elsevier
- Hyoung Seon Baik, "Limitations in Orthopedic and Camouflage Treatment for Class III Malocclusion", Seminars in Orthodontics, 13(3), pp.158~174 (2007), Elsevier BV[DOI]
- Nikia R. Burns, "Class III camouflage treatment: What are the limits?", American Journal of Orthodontics and Dentofacial Orthopedics, 137(1), pp.9.e1~9.e13 (2010), Elsevier BV[DOI]
- Peter Ngan, "Evolution of Class III treatment in orthodontics", American Journal of Orthodontics and Dentofacial Orthopedics, 148(1), pp.22~36 (2015), Elsevier BV[DOI]
- Kim YH, "Anterior openbite and its treatment with multiloop edgewise archwire", Angle Orthod, 57, pp.290~321 (1987)
- Peter W. Ngan, "Esthetics and biomechanics in orthodontics", pp.246~293 (2015), WB Saunders
- W. Eugene Roberts, "Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion", American Journal of Orthodontics and Dentofacial Orthopedics, 148(6), pp.943~955 (2015), Elsevier BV[DOI]
- Jong-Moon Chae, "Biomechanical analysis for total distalization of the mandibular dentition: A finite element study", American Journal of Orthodontics and Dentofacial Orthopedics, 155(3), pp.388~397 (2019), Elsevier BV[DOI]
- Kim TW, "Clear aligner: an efficient, esthetic, and comfortable option for an adult patient", World J Orthod, 8, pp.13~18 (2007)
- M. Shalish, "Adult patients' adjustability to orthodontic appliances. Part I: a comparison between Labial, Lingual, and Invisalign", The European Journal of Orthodontics, 34(6), pp.724~730 (2011), Oxford University Press (OUP)[DOI]
- AArif Yezdani, "Transparent aligners: An invisible approach to correct mild skeletal class III malocclusion", Journal of Pharmacy And Bioallied Sciences, 7(5), pp.301~ (2015), Medknow[DOI]
- Nanda R, "Temporary anchorage devices in orthodontics" (2020), Elsevier
- Elisa Rota, "Lower Molar Distalization Using Clear Aligners: Bodily Movement or Uprighting? A Preliminary Study", Applied Sciences, 12(14), pp.7123~ (2022), MDPI AG[DOI]
- Juan Pablo Gomez, "Initial force systems during bodily tooth movement with plastic aligners and composite attachments: A three-dimensional finite element analysis", The Angle Orthodontist, 85(3), pp.454~460 (2014), The Angle Orthodontist (EH Angle Education & Research Foundation)[DOI]
- Madhur Upadhyay, "Biomechanics of clear aligners: hidden truths & first principles", Journal of the World Federation of Orthodontists, 11(1), pp.12~21 (2022), Elsevier BV[DOI]
- Lu Liu, "Effectiveness of an anterior mini-screw in achieving incisor intrusion and palatal root torque for anterior retraction with clear aligners:", The Angle Orthodontist, 91(6), pp.794~803 (2021), The Angle Orthodontist (EH Angle Education & Research Foundation)[DOI]
- Comba B, "A three-dimensional finite element analysis of upper-canine distalization with clear aligners, composite attachments, and Class II elastics", J Clin Orthod, 51, pp.24~28 (2017)
- Rossini G, "Incisors extrusion with clear aligners technique : a finite element analysis study", Appl Sci, 11, pp.1167~ (2021)
- Cortona A, "Clear aligner orthodontic therapy of rotated mandibular round-shaped teeth : a finite element study", Angle Orthod, 90, pp.247~254 (2020)
- Kawamura J, "A finite element analysis of the effects of archwire size on orthodontic tooth movement in extraction space closure with miniscrew sliding mechanics", Prog Orthod, 20, pp.3~ (2019)
- Cattaneo PM, "The finite element method : a tool to study orthodontic tooth movement", J Dent Res, 84, pp.428~433 (2005)
- Tai S, "Clear aligner technique" (2018), Quintessence
- Eliades T, "Orthodontic aligner treatment" (2021), Thieme
- Eugene Chan, "The Invisalign ® appliance today: A thinking person’s orthodontic appliance", Seminars in Orthodontics, 23(1), pp.12~64 (2017), Elsevier BV[DOI]
- Jun Kawamura, "Biomechanical analysis for total mesialization of the maxillary dentition: A finite element study", American Journal of Orthodontics and Dentofacial Orthopedics, 159(6), pp.790~798 (2021), Elsevier BV[DOI]
- Brezniak N, "The clear plastic appliance : a biomechanical point of view", Angle Orthod, 78, pp.381~382 (2008)
- Madhur Upadhyay, "Force system generated by elastic archwires with vertical V bends: a three-dimensional analysis", The European Journal of Orthodontics, 39, pp.202~208 (2017), Oxford University Press (OUP)[DOI]