Palatal en-masse retraction of segmented maxillary anterior teeth: A finite element study
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: The aim of this finite element study was to clarify the mechanics of tooth movement in palatal en-masse retraction of segmented maxillary anterior teeth by using anchor screws and lever arms. Methods: A three-dimensional finite element method was used to simulate overall orthodontic tooth movements. The line of action of the force was varied by changing both the lever arm height and anchor screw position. Results: When the line of action of the force passed through the center of resistance (CR), the anterior teeth showed translation. However, when the line of action was not perpendicular to the long axis of the anterior teeth, the anterior teeth moved bodily with an unexpected intrusion even though the force was transmitted horizontally. To move the anterior teeth bodily without intrusion and extrusion, a downward force passing through the CR was necessary. When the line of action of the force passed apical to the CR, the anterior teeth tipped counterclockwise during retraction, and when the line of action of the force passed coronal to the CR, the anterior teeth tipped clockwise during retraction. Conclusions: The movement pattern of the anterior teeth changed depending on the combination of lever arm height and anchor screw position. However, this pattern may be unpredictable in clinical settings because the movement direction is not always equal to the force direction.
Abstract
Objective: The aim of this finite element study was to clarify the mechanics of tooth movement in palatal en-masse retraction of segmented maxillary anterior teeth by using anchor screws and lever arms. Methods: A three-dimensional finite element method was used to simulate overall orthodontic tooth movements. The line of action of the force was varied by changing both the lever arm height and anchor screw position. Results: When the line of action of the force passed through the center of resistance (CR), the anterior teeth showed translation. However, when the line of action was not perpendicular to the long axis of the anterior teeth, the anterior teeth moved bodily with an unexpected intrusion even though the force was transmitted horizontally. To move the anterior teeth bodily without intrusion and extrusion, a downward force passing through the CR was necessary. When the line of action of the force passed apical to the CR, the anterior teeth tipped counterclockwise during retraction, and when the line of action of the force passed coronal to the CR, the anterior teeth tipped clockwise during retraction. Conclusions: The movement pattern of the anterior teeth changed depending on the combination of lever arm height and anchor screw position. However, this pattern may be unpredictable in clinical settings because the movement direction is not always equal to the force direction.
참고문헌 (20)
- Gjessing P., "Controlled retraction of maxillary incisors", Am J Orthod Dentofacial Orthop, 101, pp.120~131 (1992)
- Park YC, "Lever-arm mechanics in lingual orthodontics", J Clin Orthod, 34, pp.601~605 (2000)
- Chung KR, "Corticotomy-assisted orthodontics", J Clin Orthod, 35, pp.331~339 (2001)
- Hong RK, "Lever-arm and miniimplant system for anterior torque control during retraction in lingual orthodontic treatment", Angle Orthod, 75, pp.129~141 (2005)
- Kim SH, "Severe Class II anterior deep bite malocclusion treated with a C-lingual retractor", Angle Orthod, 74, pp.280~285 (2004)
- Park YC, "Extraction space closure with vacuum-formed splints and miniscrew anchorage", J Clin Orthod, 39, pp.76~79 (2005)
- Chung KR, "Unusual extraction treatment in Class II division 1using C-orthodontic mini-implants", Angle Orthod, 77, pp.155~166 (2007)
- Park YC, "Esthetic segmental retraction of maxillary anterior teeth with a palatal appliance and orthodontic mini-implants", Am J Orthod Dentofacial Orthop, 131, pp.537~544 (2007)
- Chung KR, "Class II malocclusion treated by combining a lingual retractor and a palatal plate", Am J Orthod Dentofacial Orthop, 133, pp.112~123 (2008)
- Jang HJ, "Locating the center of resistance of maxillary anterior teeth retracted by Double J Retractor with palatal miniscrews", Angle Orthod, 80, pp.1023~1028 (2010)
- 이언화, "교정용 미니스크류를 이용한 연속호선과 분절호선의 유한요소분석", 대한치과교정학회지, 41(4), pp.227~253 (2011), 대한치과교정학회
- Park JH, "Esthetic orthodontic treatment with a double J retractor and temporary anchorage devices", Am J Orthod Dentofacial Orthop, 141, pp.796~805 (2012)
- 모성서, "Torque control during lingual anterior retraction without posterior appliances", 대한치과교정학회지, 43(1), pp.3~14 (2013), 대한치과교정학회
- Osipenko MA, "Center of resistance and center of rotation of a tooth : the definitions, conditions of existence, properties", Russ J Biomech, 1, pp.5~15 (1999)
- Kojima Y, "Finite element analysis of the effect of force directions on tooth movement in extraction space closure with miniscrew sliding mechanics", Am J Orthod Dentofacial Orthop, 142, pp.501~508 (2012)
- Kojima Y, "A finite element simulation of initial movement, orthodontic movement, and the centre of resistance of the maxillary teeth connected with an archwire", Eur J Orthod, 36, pp.255~261 (2014)
- Kojima Y, "Numerical simulations of canine retraction with T-loop springs based on the updated moment-to-force ratio", Eur J Orthod, 34, pp.10~18 (2012)
- Kim MJ, "A finite element analysis of the optimal bending angles in a running loop for mesial translation of a mandibular molar using indirect skeletal anchorage", Orthod Craniofac Res, 21, pp.63~70 (2018)
- Goto T., "Experimental study in the physiological mobility of the tooth", Shikwa Gakuho, 71, pp.1415~1444 (1971)
- Osipenko MA, "Center of resistance and center of rotation of a tooth : the definitions, conditions of existence, properties", Russ J Biomech, 1, pp.5~15 (1999)