불특정 공식손상을 가진 316L 스테인리스강의 기계적 물성치 예측을 위한 다중선형회귀 적용
Application of Multiple Linear Regression to Predict Mechanical Properties of 316L Stainless Steel with Unspecified Pit Corrosion
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The aim of this study was to propose a multiple linear regression (MLR) equation to predict ultimate tensile strength (UTS) of 316L stainless steel with unspecified pit corrosion. Tensile specimens with pit corrosion were prepared using a potentiostatic acceleration test method. Pit corrosion was characterized by measuring ten factors using a confocal laser microscope. Data were collected from 22 tensile tests. At 85% confidence level, total pit volume, maximum pit depth, mean ratio of surface area, and mean area were significant factors showing linear relationships with UTS. The MLR equation using these three significant factors at a 85% confidence level showed considerable prediction performance for UTS. Determination coefficient (R2`) was 0.903 with training and test data sets. The yield strength ratio of 316L stainless steel was found to be around 0.85. All specimens with a pit corrosion presented a yield ratio of approximately 0.85 with R2 of 0.998. Therefore, pit corrosion did not affect the yield ratio.
Abstract
The aim of this study was to propose a multiple linear regression (MLR) equation to predict ultimate tensile strength (UTS) of 316L stainless steel with unspecified pit corrosion. Tensile specimens with pit corrosion were prepared using a potentiostatic acceleration test method. Pit corrosion was characterized by measuring ten factors using a confocal laser microscope. Data were collected from 22 tensile tests. At 85% confidence level, total pit volume, maximum pit depth, mean ratio of surface area, and mean area were significant factors showing linear relationships with UTS. The MLR equation using these three significant factors at a 85% confidence level showed considerable prediction performance for UTS. Determination coefficient (R2`) was 0.903 with training and test data sets. The yield strength ratio of 316L stainless steel was found to be around 0.85. All specimens with a pit corrosion presented a yield ratio of approximately 0.85 with R2 of 0.998. Therefore, pit corrosion did not affect the yield ratio.
참고문헌 (20)
- 박영주, "스테인리스 스틸의 표면 산화피막 성장과 내부식성 상관관계", CORROSION SCIENCE AND TECHNOLOGY, 20(3), pp.152~157 (2021), 한국부식방식학회[DOI]
- 부명환, "해수분위기에서 스테인리스강 배관 소켓 용접부의 선택적 부식", CORROSION SCIENCE AND TECHNOLOGY, 19(4), pp.224~230 (2020), 한국부식방식학회[DOI]
- Mohamed El Amine Ben Seghier, "Prediction of maximum pitting corrosion depth in oil and gas pipelines", Engineering Failure Analysis, 112, pp.104505~ (2020), Elsevier BV[DOI]
- Jing Dai, "Revealing significant effect of nitrogen on prolonging pitting corrosion lifetime of martensitic stainless steel by modelling approach", Corrosion Science, 203, pp.110369~ (2022), Elsevier BV[DOI]
- 조수연, "3 wt% NaCl 수용액에서 알루미늄과 스테인리스강의 부식에 따른 광 반사 거동", CORROSION SCIENCE AND TECHNOLOGY, 19(3), pp.109~114 (2020), 한국부식방식학회[DOI]
- Farzaneh Ahmadi, "Ultimate strength prediction of corroded plates with center-longitudinal crack using FEM and ANN", Ocean Engineering, 206, pp.107281~ (2020), Elsevier BV[DOI]
- Liang Feng, "A parametric study on effects of pitting corrosion on steel plate's ultimate strength", Applied Ocean Research, 95, pp.102026~ (2020), Elsevier BV[DOI]
- Yan Zhang, "Ultimate strength of hull structural plate with pitting corrosion damnification under combined loading", Ocean Engineering, 116, pp.273~285 (2016), Elsevier BV[DOI]
- Zhongwei Zhao, "Tensile strength of Q345 steel with random pitting corrosion based on numerical analysis", Thin-Walled Structures, 148, pp.106579~ (2020), Elsevier BV[DOI]
- Duo Ok, "Artificial neural networks and their application to assessment of ultimate strength of plates with pitting corrosion", Ocean Engineering, 34(17-18), pp.2222~2230 (2007), Elsevier BV[DOI]
- Tatsuro Nakai, "Effect of pitting corrosion on strength of web plates subjected to patch loading", Thin-Walled Structures, 44(1), pp.10~19 (2006), Elsevier BV[DOI]
- Tatsuro Nakai, "Effect of pitting corrosion on local strength of hold frames of bulk carriers (1st report)", Marine Structures, 17(5), pp.403~432 (2004), Elsevier BV[DOI]
- K.M. Deen, "Failure investigation of heat exchanger plates due to pitting corrosion", Engineering Failure Analysis, 17(4), pp.886~893 (2010), Elsevier BV[DOI]
- Robert E. Melchers, "Extreme value statistics and long-term marine pitting corrosion of steel", Probabilistic Engineering Mechanics, 23(4), pp.482~488 (2008), Elsevier BV[DOI]
- A. Rahbar-Ranji, "Stress analysis of a randomly undulated plate due to corrosion in marine structures", pp.2001
- Jie Sheng, "Effect of simulated pitting corrosion on the tensile properties of steel", Construction and Building Materials, 131, pp.90~100 (2017), Elsevier BV[DOI]
- Hai-xuan Yu, "Pitting-corrosion on internal wall of tee-pipe joined with main-pipe for seawater tank-washing system of a tanker", Engineering Failure Analysis, 104, pp.439~447 (2019), Elsevier BV[DOI]
- Nicolas Larché, "Corrosion and corrosion management investigations in seawater reverse osmosis desalination plants", Desalination and Water Treatment, 51(7-9), pp.1744~1761 (2013), Elsevier BV[DOI]
- Mojtaba Mokhtari, "Reliability of the conventional approach for stress", fatigue analysis of pitting corroded pipelines – Development of a safer approach, 2020, pp.85, 101943~[DOI]
- Ren Songbo, "Effects of the corrosion pitting parameters on the mechanical properties of corroded steel", Construction and Building Materials, 272, pp.121941~ (2021), Elsevier BV[DOI]