선택적 레이저 용융법으로 제조한 316L 스테인리스강의 기계적이방성에 미치는 기공의 영향
Effect of Porosity on Mechanical Anisotropy of 316L Austenitic Stainless Steel Additively Manufactured by Selective Laser Melting
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Selective laser melting (SLM), a type of additive manufacturing (AM) technology, leads a global manufacturing trend by enabling the design of geometrically complex products with topology optimization for optimized performance. Using this method, three-dimensional (3D) computer-aided design (CAD) data components can be built up directly in a layer-by-layer fashion using a high-energy laser beam for the selective melting and rapid solidification of thin layers of metallic powders. Although there are considerable expectations that this novel process will overcome many traditional manufacturing process limits, some issues still exist in applying the SLM process to diverse metallic materials, particularly regarding the formation of porosity. This is a major processing-induced phenomenon, and frequently observed in almost all SLM-processed metallic components. In this study, we investigate the mechanical anisotropy of SLM-produced 316L stainless steel based on microstructural factors and highly-oriented porosity. Tensile tests are performed to investigate the microstructure and porosity effects on mechanical anisotropy in terms of both strength and ductility.
Abstract
Selective laser melting (SLM), a type of additive manufacturing (AM) technology, leads a global manufacturing trend by enabling the design of geometrically complex products with topology optimization for optimized performance. Using this method, three-dimensional (3D) computer-aided design (CAD) data components can be built up directly in a layer-by-layer fashion using a high-energy laser beam for the selective melting and rapid solidification of thin layers of metallic powders. Although there are considerable expectations that this novel process will overcome many traditional manufacturing process limits, some issues still exist in applying the SLM process to diverse metallic materials, particularly regarding the formation of porosity. This is a major processing-induced phenomenon, and frequently observed in almost all SLM-processed metallic components. In this study, we investigate the mechanical anisotropy of SLM-produced 316L stainless steel based on microstructural factors and highly-oriented porosity. Tensile tests are performed to investigate the microstructure and porosity effects on mechanical anisotropy in terms of both strength and ductility.
참고문헌 (27)
- 최중호, "적층 가공된 3차원 조형체의 치밀화에 미치는 단일 melt pool 형상의 영향", 한국분말재료학회지, 24(3), pp.187~194 (2017), 한국분말재료학회[DOI]
- T. D. Ngo, , Composites Part B, 143, pp.172~ (2018)
- L. E. Murr, , J. Mater. Sci. Technol., 28, pp.1~ (2012)
- D. D. Gu, , Int. Mater. Rev., 57, pp.133~ (2012)
- 강민철, "금속 적층제조기술의 국내외 개발동향과 기술적 이슈", 대한용접접합학회지, 34(4), pp.9~16 (2016), 대한용접접합학회[DOI]
- Y. M. Wang, , Nat. Mat., 17, pp.63~ (2018)
- S. Gorsse, , Sci. Technol. Adv. Mater., 18, pp.584~ (2017)
- D. C. Hofmann, , J. Mater. Res., 29, pp.1899~ (2014)
- B. V. Hooreweder, , Acta Biomater., 47, pp.193~ (2017)
- M. Brandt, , Adv. Mater. Res., 633, pp.135~ (2013)
- M. Seabra, , Procedia Struct. Integrity, 1, pp.289~ (2016)
- N. J. Harrison, , Acta. Mater, 94, pp.59~ (2015)
- C. Qiu, , Acta. Mater., 96, pp.72~ (2015)
- M. Xia, , Int. J. Mach. Tools Manuf., 116, pp.96~ (2017)
- G. Kasperovich, , Mater. Des., 105, pp.160~ (2016)
- N. T. Aboulkhair, , Addit. Manuf., 1(4), pp.77~ (2014)
- R. Li, , J. Mater. Eng. Perform., 19, pp.666~ (2010)
- N. P. Lavery, , Mater. Sci. Eng., A, 693, pp.186~ (2017)
- A. Martens, , Powder Metall., 57, pp.184~ (2014)
- 김정기, "2층 클래드 강재의 유한요소해석을 이용한 이방성지수 계산", 소성∙가공, 23(5), pp.311~316 (2014), 한국소성∙가공학회
- 오지원, "적층식 제조(Additive manufacturing) 기술동향", 한국분말재료학회지, 24(6), pp.494~507 (2017), 한국분말재료학회[DOI]
- T. Niendorf, , Metall. Mater. Trans. B, 44, pp.794~ (2013)
- J. Suryawanshi, , Mater. Sci. Eng., A, 696, pp.113~ (2017)
- M. S. Pham, , Mater. Sci. Eng., A, 704, pp.102~ (2017)
- M. Cloots, , Mater. Sci. Eng., A, 658, pp.68~ (2016)
- S. H. Sun, , Acta. Mater., 64, pp.154~ (2014)
- S. K. Hyun, , Mater. Sci. Eng., A, 299, pp.241~ (2001)