다중선형회귀법을 활용한 예민화와 환경변수에 따른 AL-6XN강의 공식특성 예측
Prediction of Pitting Corrosion Characteristics of AL-6XN Steel with Sensitization and Environmental Variables Using Multiple Linear Regression Method
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study aimed to predict the pitting corrosion characteristics of AL-6XN super-austenitic steel using multiple linear regression. The variables used in the model are degree of sensitization, temperature, and pH. Experiments were designed and cyclic polarization curve tests were conducted accordingly. The data obtained from the cyclic polarization curve tests were used as training data for the multiple linear regression model. The significance of each factor in the response (critical pitting potential, repassivation potential) was analyzed. The multiple linear regression model was validated using experimental conditions that were not included in the training data. As a result, the degree of sensitization showed a greater effect than the other variables. Multiple linear regression showed poor performance for prediction of repassivation potential. On the other hand, the model showed a considerable degree of predictive performance for critical pitting potential. The coefficient of determination (R2) was 0.7745. The possibility for pitting potential prediction was confirmed using multiple linear regression.
Abstract
This study aimed to predict the pitting corrosion characteristics of AL-6XN super-austenitic steel using multiple linear regression. The variables used in the model are degree of sensitization, temperature, and pH. Experiments were designed and cyclic polarization curve tests were conducted accordingly. The data obtained from the cyclic polarization curve tests were used as training data for the multiple linear regression model. The significance of each factor in the response (critical pitting potential, repassivation potential) was analyzed. The multiple linear regression model was validated using experimental conditions that were not included in the training data. As a result, the degree of sensitization showed a greater effect than the other variables. Multiple linear regression showed poor performance for prediction of repassivation potential. On the other hand, the model showed a considerable degree of predictive performance for critical pitting potential. The coefficient of determination (R2) was 0.7745. The possibility for pitting potential prediction was confirmed using multiple linear regression.
참고문헌 (16)
- Jui-Sheng Chou, "The use of artificial intelligence combiners for modeling steel pitting risk and corrosion rate", Engineering Applications of Artificial Intelligence, 65, pp.471~483 (2017), Elsevier BV[DOI]
- H. Khatak, "Corrosion of austenitic stainless steels: mechanism, mitigation and monitoring", pp.75~80 (2002), Woodhead publishing
- T. Hong, , Corros. Sci, 39, pp.285~293 (1997)[DOI]
- E.A Abd El Meguid, "The effect of some sulphur compounds on the pitting corrosion of type 304 stainless steel", Materials Chemistry and Physics, 63(1), pp.67~74 (2000), Elsevier BV[DOI]
- C. Alonso, "Chloride threshold dependence of pitting potential of reinforcements", Electrochimica Acta, 47(21), pp.3469~3481 (2002), Elsevier BV[DOI]
- A. Pardo, "Pitting corrosion behaviour of austenitic stainless steels – combining effects of Mn and Mo additions", Corrosion Science, 50(6), pp.1796~1806 (2008), Elsevier BV[DOI]
- Helmuth Sarmiento Klapper, "Environmental factors affecting pitting corrosion of type 304 stainless steel investigated by electrochemical noise measurements under potentiostatic control", Corrosion Science, 75, pp.239~247 (2013), Elsevier BV[DOI]
- Yafei Wang, "Effect of pH and chloride on the micro-mechanism of pitting corrosion for high strength pipeline steel in aerated NaCl solutions", Applied Surface Science, 349, pp.746~756 (2015), Elsevier BV[DOI]
- Y. S. Kim, , Corros. Sci. Tech, 9, pp.20~ (2010)
- B. Beverskog, "Revised pourbaix diagrams for chromium at 25–300 °C", Corrosion Science, 39(1), pp.43~57 (1997), Elsevier BV[DOI]
- 김기태, "이음매 없는 304L 스테인리스강관의 부식특성에 미치는 열처리의 영향", CORROSION SCIENCE AND TECHNOLOGY, 16(6), pp.305~316 (2017), 한국부식방식학회[DOI]
- T. O. Kowang, , Appl. Mech. Mater, 789, pp.1201~ (2015)[DOI]
- R. Baboian, "Corrosion tests and standards: application and interpretation", pp.502~ (1995), ASTM International
- Arash Azimi Dastgerdi, "Experimental design to study the influence of temperature, pH, and chloride concentration on the pitting and crevice corrosion of UNS S30403 stainless steel", Corrosion Science, 159, pp.108160~ (2019), Elsevier BV[DOI]
- J. W. Osborne, , Pract. Assess. Res. Evaluation, 7, pp.2~ (2000)
- H. Ezuber, "Effect of Surface Finish on the Pitting Corrosion Behavior of Sensitized AISI 304 Austenitic Stainless Steel Alloys in 3.5% NaCl Solutions", Surface Engineering and Applied Electrochemistry, 54(1), pp.73~80 (2018), Allerton Press[DOI]