오스테나이트계 스테인리스강과 니켈합금의 해수 농도 변화에 따른 전기화학적 부식 손상 특성
Electrochemical Corrosion Damage Characteristics of Austenite Stainless Steel and Nickel Alloy with Various Seawater Concentrations
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Due to advancement of the industry, operation of a device in a harsh environment is increasing. Especially, the marine environment contains Cl- ions which causes localized corrosion such as pitting and crevice corrosion of stainless steel and various metals. In this study, electrochemical corrosion behaviors of austenitic stainless steel (STS 316L) and nickel alloy (Inconel 600) with different seawater concentrations (fresh water, seawater, mixed water) were investigated. The STS 316L and Inconel 600 were etched in 10% oxalic acid and composed of an austenitic phase. Results of Tafel analysis in seawater showed that STS 316L and Inconel 600 presented the highest corrosion current densities of 7.75 × 10-4 mA/cm2 and 1.11 × 10-4 mA/cm2 and the most negative pitting potentials of 0.94 V and 1.06 V, respectively. The maximum damage depths and surface damage ratio by pitting corrosion increased with chloride concentration. The STS 316L had higher PREN than Inconel 600. However, the surface damage and weight loss of Inconel 600 were superior to STS 316L. It was difficult to compare the pitting resistance of STS 316L based on Fe and Inconel 600 based on Ni with PREN simply.
Abstract
Due to advancement of the industry, operation of a device in a harsh environment is increasing. Especially, the marine environment contains Cl- ions which causes localized corrosion such as pitting and crevice corrosion of stainless steel and various metals. In this study, electrochemical corrosion behaviors of austenitic stainless steel (STS 316L) and nickel alloy (Inconel 600) with different seawater concentrations (fresh water, seawater, mixed water) were investigated. The STS 316L and Inconel 600 were etched in 10% oxalic acid and composed of an austenitic phase. Results of Tafel analysis in seawater showed that STS 316L and Inconel 600 presented the highest corrosion current densities of 7.75 × 10-4 mA/cm2 and 1.11 × 10-4 mA/cm2 and the most negative pitting potentials of 0.94 V and 1.06 V, respectively. The maximum damage depths and surface damage ratio by pitting corrosion increased with chloride concentration. The STS 316L had higher PREN than Inconel 600. However, the surface damage and weight loss of Inconel 600 were superior to STS 316L. It was difficult to compare the pitting resistance of STS 316L based on Fe and Inconel 600 based on Ni with PREN simply.
참고문헌 (19)
- Inamuddin, "Sustainable Corrosion Inhibitors", Materials Research Foundations, 107, pp.206~ (2021)[DOI]
- Go Okamoto, "Passive film of 18-8 stainless steel structure and its function", Corrosion Science, 13(6), pp.471~489 (1973), Elsevier BV[DOI]
- Florian Mansfeld, "An electrochemical and surface analytical study of stainless steels and titanium exposed to natural seawater", Corrosion Science, 33(3), pp.445~456 (1992), Elsevier BV[DOI]
- E. Hanki, "Trend and Prospect of Scrubber Technology for Regulatory on Sulfur Content in Marine Fuel Oil", KIC News, 22(5) (2019)[DOI]
- B. Cai, "An experimental Study of Crevice Corrosion Behaviour of 316L Stainless Steel in Artificial Seawater", Corrosion Science, 52, pp.3235~ (2010)
- S. S. Xin, "Electrochemical corrosion characteristics of type 316L stainless steel in hot concentrated seawater", Corrosion Science, 81, pp.96~ (2014)
- M. Karaminezhaad-Ranjbar, "Pitting Corrosion of Inconel 600 in High Temperature Chloride Solution under Controlled Hydrodynamic Conditions", Corrosion, 41(4), pp.197~204 (1985), Association for Materials Protection and Performance (AMPP)[DOI]
- S.A. Chavez, "High-temperature tensile and creep data for Inconel 600, 304 stainless steel and SA106B carbon steel", Nuclear Engineering and Design, 148(2-3), pp.351~363 (1994), Elsevier BV[DOI]
- Lv Jinlong, "Surface enriched molybdenum enhancing the corrosion resistance of 316L stainless steel", Materials Letters, 171, pp.38~41 (2016), Elsevier BV[DOI]
- S. X. Lin, "Intergranular corrosion of austenitic stainless steel", Applied mechanics and materials, 229-231, pp.14~ (2012)[DOI]
- Helmuth Sarmiento Klapper, "Localized corrosion characteristics of nickel alloys: A Review", Acta Metallurgica Sinica (English Letters), 30(4), pp.296~305 (2017), Springer Science and Business Media LLC[DOI]
- 남기우, "냉간압연률이 다른 STS316L의 침지 특성", 동력시스템공학회지, 24(3), pp.90~97 (2020), 한국동력기계공학회[DOI]
- Yu Zuo, "The effects of some anions on metastable pitting of 316L stainless steel", Corrosion Science, 44(1), pp.13~24 (2002), Elsevier BV[DOI]
- C.J. Semino, "The localized corrosion of resistant alloys in chlolride solutions", Corrosion Science, 19(12), pp.1069~1078 (1979), Elsevier BV[DOI]
- S. Esmailzadeh, "Interpretation of cyclic potentiodynamic polarization test results for study of corrosion behavior of metals: A Review", Protection of Metals and Physical Chemistry of Surfaces, 54(5), pp.976~989 (2018), Pleiades Publishing Ltd[DOI]
- Songkram PIYAMAHANT, "Simulation for corrosion cracking of cover concrete in reinforced concrete structures", Journal of JSCE, 1(1), pp.162~180 (2013), Japan Society of Civil Engineers[DOI]
- Natalia Makuch, "The importance of phase composition for corrosion resistance of borided layers produced on nickel alloys", Materials, 13(22), pp.5131~ (2020), MDPI AG[DOI]
- Dean, John A., "Lange’s Handbook of Chemistry", pp.4~94 (1979), McGraw-Hill
- M. Iannuzzi, "Selecting corrosion resistant alloys for seawater applications", CORROSION, 2014 (2014), ~[DOI]