본문 바로가기
KERD
논문KCI 등재

압전방식 초음파 치석제거기의 작업조건에 따른 치과주조용 합금의 삭제에 관한 연구

The effect of working parameters on removal of casting gold alloy using a piezoelectric ultrasonic scaler with scaler tip in vitro

1

조회

0

다운로드

1

인용

0

참고문헌

주제분류치의학

초록

Purpose: Ultrasonic scalers have been widely used for removing biofilm which is considered as major etiologic factor of periodontal disease. The purpose of this study was to evaluate the effect of working parameters of piezoeletric ultrasonic scaler with scaler tip (No. 1 tip) on casting gold alloy removal. Methods: Type III dental casting gold alloy (Firmilay ® , Jelenko Inc, CA, USA) was used as substitute for tooth substance. Piezoeletric ultrasonic scaler and No.1 scaler tip (P-Max ® , Satelec, France) were selected. The selected working parameters were mode (P mode, S mode), power setting (2, 4, 8) and lateral force (0.5 N, 1.0 N, 2.0 N). The effect of working parameters was evaluated in terms of ablation depth, ablation width and ablation area. Results: Mode influenced ablation depth and ablation area. Power also influenced ablation depth and ablation area. Especially, Power 2 and power 8 showed statistically significant difference. Lateral force had influence on ablation width, and 0.5 N resulted significant increase compared with 1.0 N and 2.0 N. Ablation depth was influenced by mode, power and lateral force and defect width was influenced by lateral force. Ablation area was influenced by mode and power. Conclusions: It can be concluded that the use of piezoelectric ultrasonic scaler with No. 1 scaler tip in S mode and high power may result in significant loss of tooth substance. (J Korean Acad Periodontol 2009;39:139-148)

Abstract

Purpose: Ultrasonic scalers have been widely used for removing biofilm which is considered as major etiologic factor of periodontal disease. The purpose of this study was to evaluate the effect of working parameters of piezoeletric ultrasonic scaler with scaler tip (No. 1 tip) on casting gold alloy removal. Methods: Type III dental casting gold alloy (Firmilay ® , Jelenko Inc, CA, USA) was used as substitute for tooth substance. Piezoeletric ultrasonic scaler and No.1 scaler tip (P-Max ® , Satelec, France) were selected. The selected working parameters were mode (P mode, S mode), power setting (2, 4, 8) and lateral force (0.5 N, 1.0 N, 2.0 N). The effect of working parameters was evaluated in terms of ablation depth, ablation width and ablation area. Results: Mode influenced ablation depth and ablation area. Power also influenced ablation depth and ablation area. Especially, Power 2 and power 8 showed statistically significant difference. Lateral force had influence on ablation width, and 0.5 N resulted significant increase compared with 1.0 N and 2.0 N. Ablation depth was influenced by mode, power and lateral force and defect width was influenced by lateral force. Ablation area was influenced by mode and power. Conclusions: It can be concluded that the use of piezoelectric ultrasonic scaler with No. 1 scaler tip in S mode and high power may result in significant loss of tooth substance. (J Korean Acad Periodontol 2009;39:139-148)

참고문헌 (34)

  1. Löe H, "Theilade E and Jensen SB. Experimental gingivitis in man", J Periodontol, 36, pp.177~187 (1965)
  2. Costerton JW, "Bacterial biofilms: acommon cause of persistent infections", Science, 284, pp.1318~1322 (1999)
  3. Darveau RP, "The microbial challenge in periodontitis", Periodontol 2000, 14, pp.12~32 (1997)
  4. Socransky SS, "Dental biofilms: difficult therapeutic targets", Periodontol 2000, 28, pp.12~55 (2002)
  5. Stende GW, "A comparison of ultrasonic and hand scaling", J Periodontol, 32, pp.312~ (1961)
  6. Gellin RG, "The effectiveness of the Titan-S sonic scaler versus curettes in the removal of subgingival calculus: a human surgical evaluation", J Periodontol, 57, pp.672~680 (1986)
  7. Breininger DR, "Comparative effectiveness of ultrasonic and hand scaling for the removal of subgingival plaque and calculus", J Periodontol, 8, pp.9~18 (1987)
  8. Caffesse RG, "Scaling and root planning with and without periodontal flap surgery", J Clin Periodontol, 13, pp.205~210 (1986)
  9. Buchanan SA, "Calculus removal by scaling", root planningwith and without surgical access, 1987, pp.58, 159~163
  10. Matia JI, "Efficiency of scalng of the molar furcation area with and without surgical access", Int J Periodontics Restorative Dent, 6, pp.25~35 (1986)
  11. Fleischer HC, "Scaling and root planning efficacy in multirooted teeth", J Periodontol, 60, pp.402~409 (1989)
  12. Parashis AO, "Calculus removal from multirooted teeth with and without surgical access. I. Efficacy on external and furcation surfaces in relation to probing depth", J Clin Periodontol, 20, pp.63~68 (1993)
  13. Zappa U, "Root substance removal by scaling and root planning", J Periodontol, 62, pp.750~754 (1991)
  14. Fogel HM, "Effect of periodontal root planning on dentin permeability", J Clin Periodontol, 20, pp.673~677 (1993)
  15. Fukazawa E, "Superficial cemental curettage: its efficacy in promoting improved cellular attachment on human root surfaces previously damaged by periodontitis", J Periodontol, 65, pp.168~176 (1994)
  16. Kerry GJ, "Roughness of root surfaces after use of ultrasonic instruments and hand curettes", J Periodontol, 38, pp.340~346 (1967)
  17. Wilkinson RF, "Scanning electron microscopy of the root surface following instrumentation", J Periodontol, 44, pp.559~563 (1973)
  18. Aleo JJ, "In vitro attachment of human gingival fibroblasts to root surface", J Periodontol, 46, pp.639~645 (1975)
  19. Nakib NM, "Endotoxin penetration into root cementum of periodontally healthy and diseased human teeth", J Periodontol, 53, pp.368~378 (1982)
  20. Checchi L, "Hand versus ultrasonic instrumentation in the removal of endotoxins from root surfaces in vitro", J Periodontol, 59, pp.398~402 (1988)
  21. Cheetham WA, "Root surface debridement - an in vitro assessment", J Clin Periodontol, 15, pp.288~292 (1988)
  22. Smart GJ, "The assessment of ultrasonic root surface debridement by determination of residual endotoxin levels", J Clin Periodontol, 17, pp.174~178 (1990)
  23. Claffey N, "An overview of nonsurgical and surgical therapy", Periodontol 2000, 36, pp.35~44 (2004)
  24. Trenter SC, "Ultrasonic dental scaler: associated hazards", J Clin Periodontol, 30, pp.95~101 (2003)
  25. Arabaci T, "Sonic and ultrasonic scalers in periodontal treatment: a review", Int J Dent Hyg, 5, pp.2~12 (2007)
  26. Drisko CH, "Root instrumentation: power-driven versus manual scalers, which one Dent", Clin North Am, 42, pp.229~244 (1998)
  27. Flemmig TF, "The effect of working parameters on root substance removal using a piezoelectric ultrasonic scaler in vitro", J Clin Periodontol, 25, pp.158~163 (1998)
  28. Young-kyoo Lee, "Root surface roughness following mechanical instrumentation in vivo and in vitro SEM study", J Korean Acad Periodontol, 28, pp.823~828 (1998)
  29. Young-kyoo Lee, "The Effect of a Piezoelectric Ultrasonic Scaler with Curette Tip on Root Substitute Removal in Vitro", J Korean Acad Periodontol, 30, pp.429~441 (2000)
  30. Young-kyoo Lee, "The Effect of a Piezoelectric Ultrasonic Scaler with Curette Tip on Casting Gold Removal in Vitro", J Korean Acad Periodontol, 31, pp.531~542 (2001)
  31. Craig RG, "Restorative dental materials, 9th ed", pp.89~ (1993), Mosby-Year Book, Inc.
  32. Hildebrand CN, "Periodontic-endodontic interrelationships", Dent Clin North Am, 24, pp.797~812 (1980)
  33. Nyman S, "The role of diseased root cementum in healing following treatment of periodontal disease", J Clin Periodontol, 15, pp.464~468 (1988)

관련 논문AI추천

이 간행물의 다른 논문 (20건)