The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS. RelyX Ultimate Clicker light-cured and dual-cured resin cement specimens with 1.5-mm thicknesses (n=300, 10/group), were placed under four types of crystalline core structure (Vita Enamic, Vita Suprinity, GC Ceresmart, Degudent Prettau Anterior). The specimens were irradiated for 40 seconds with an LED Soft-Start or pulse-delay unit or 20 seconds with a QTH unit. DC ratios were determined by using Fourier transform infrared spectroscopy (FTIR) after curing the specimen at 1 day and 1 month. The data were analyzed using the Mann-Whitney U test (for paired comparison) and the Kruskal-Wallis H test (for multiple comparison), with a significance level of P<.05. RESULTS. DC values were the highest for RelyX Ultimate Clicker light-cure specimens polymerized with the LED Soft-Start unit. The combination of the Vita Suprinity disc and RelyX Ultimate Clicker dual-cure resin cement yielded significantly higher values at both timepoints with all light units (all, P<.05). CONCLUSION. Within the limitations of this study, we conclude that the DC of RelyX Ultimate Clicker dual-cure resin cement was improved significantly by the use of Vita Suprinity and the LED Soft-Start light unit. We strongly recommend the combined use of an LED light unit and dual-cure luting cement for monolithic ceramic restorations.
Abstract
PURPOSE. To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS. RelyX Ultimate Clicker light-cured and dual-cured resin cement specimens with 1.5-mm thicknesses (n=300, 10/group), were placed under four types of crystalline core structure (Vita Enamic, Vita Suprinity, GC Ceresmart, Degudent Prettau Anterior). The specimens were irradiated for 40 seconds with an LED Soft-Start or pulse-delay unit or 20 seconds with a QTH unit. DC ratios were determined by using Fourier transform infrared spectroscopy (FTIR) after curing the specimen at 1 day and 1 month. The data were analyzed using the Mann-Whitney U test (for paired comparison) and the Kruskal-Wallis H test (for multiple comparison), with a significance level of P<.05. RESULTS. DC values were the highest for RelyX Ultimate Clicker light-cure specimens polymerized with the LED Soft-Start unit. The combination of the Vita Suprinity disc and RelyX Ultimate Clicker dual-cure resin cement yielded significantly higher values at both timepoints with all light units (all, P<.05). CONCLUSION. Within the limitations of this study, we conclude that the DC of RelyX Ultimate Clicker dual-cure resin cement was improved significantly by the use of Vita Suprinity and the LED Soft-Start light unit. We strongly recommend the combined use of an LED light unit and dual-cure luting cement for monolithic ceramic restorations.
참고문헌 (29)
- Lee IB, "Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements", Dent Mater, 24, pp.1141~1147 (2008)[DOI]
- Archegas LR, "Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing", J Dent, 39, pp.804~810 (2011)[DOI]
- Kumbuloglu O, "A study of the physical and chemical properties of four resin composite luting cements", Int J Prosthodont, 17, pp.357~363 (2004)
- Kelly JR, "Ceramic materials in dentistry: historical evolution and current practice", Aust Dent J, 56, pp.84~96 (2011)[DOI]
- Flury S, "Light curing through glass ceramics: effect of curing mode on micromechanical properties of dual-curing resin cements", Clin Oral Investig, 18, pp.809~818 (2014)[DOI]
- Nakamura K, "Fracture resistance of monolithic zirconia molar crowns with reduced thickness", Acta Odontol Scand, 73, pp.602~608 (2015)[DOI]
- Pelaez J, "A four-year prospective clinical evaluation of zirconia and metalceramic posterior fixed dental prostheses", Int J Prosthodont, 25, pp.451~458 (2012)
- Halvorson RH, "Energy dependent polymerization of resin-based composite", Dent Mater, 18, pp.463~469 (2002)[DOI]
- Rueggeberg FA, "A predictive model for the polymerization of photo-activated resin composites", Int J Prosthodont, 7, pp.159~166 (1994)
- Yan YL, "Changes in degree of conversion and microhardness of dental resin cements", Oper Dent, 35, pp.203~210 (2010)[DOI]
- Arrais CA, "Kinetic analysis of monomer conversion in auto- and dual-polymerizing modes of commercial resin luting cements", J Prosthet Dent, 101, pp.128~136 (2009)[DOI]
- Burke FJ, "Trends in indirect dentistry: 3. Luting materials", Dent Update, 32, pp.251~ (2005)[DOI]
- Moraes RR, "Light- and time-dependent polymerization of dual-cured resin luting agent beneath ceramic", Acta Odontol Scand, 66, pp.257~261 (2008)[DOI]
- Ernst CP, "In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents", J Prosthet Dent, 93, pp.551~558 (2005)[DOI]
- Asmussen E, "Polymer structure of a light-cured resin composite in relation to distance from the surface", Eur J Oral Sci, 111, pp.277~279 (2003)[DOI]
- Asmussen E, "Influence of pulse-delay curing on softening of polymer structures", J Dent Res, 80, pp.1570~1573 (2001)[DOI]
- Chan KC, "Curing light-activated composite cement through porcelain", J Dent Res, 68, pp.476~480 (1989)[DOI]
- Davidson CL, "Advances in Glass Ionomer Cements", pp.51~65 (1999), Quintessence Publishing Co. Inc.
- Arrais CA, "Microtensile bond strength of dual-polymerizing cementing systems to dentin using different polymerizing modes", J Prosthet Dent, 97, pp.99~106 (2007)[DOI]
- Asmussen E, "Polymerization contraction of resin composite vs. energy and power density of light-cure", Eur J Oral Sci, 113, pp.417~421 (2005)[DOI]
- Moraes LG, "Infrared spectroscopy: a tool for determination of the degree of conversion in dental composites", J Appl Oral Sci, 16, pp.145~149 (2008)[DOI]
- Moraes RR, "Dual and self-curing potential of self-adhesive resin cements as thin films", Oper Dent, 36, pp.635~642 (2011)[DOI]
- Souza EJ Jr, "Influence of the curing mode on the degree of conversion of a dual-cured self-adhesive resin luting cement beneath ceramic", Acta Odontol Scand, 71, pp.444~448 (2013)[DOI]
- Tarle Z, "Composite conversion and temperature rise using a conventional, plasma arc, and an experimental blue LED curing unit", J Oral Rehabil, 29, pp.662~667 (2002)[DOI]
- Bala O, "Effect of LED and halogen light curing on polymerization of resin-based composites", J Oral Rehabil, 32, pp.134~140 (2005)[DOI]
- Sulaiman TA, "Degree of conversion of dual-polymerizing cements light polymerized through monolithic zirconia of different thicknesses and types", J Prosthet Dent, 114, pp.103~108 (2015)[DOI]
- Sen N, "Mechanical and optical properties of monolithic CAD-CAM restorative materials", J Prosthet Dent, 119, pp.593~599 (2018)[DOI]
- Acar O, "Color stainability of CAD", CAM and nanocomposite resin materials, 2016, pp.115, 71~75
- van Noort R, "Introduction to dental materials", pp.231~232 (2013), Elsevier Inc.; Mosby Ltd