The effect of thickness and translucency of polymer-infiltrated ceramic-network material on degree of conversion of resin cements

키워드

참고문헌 (38)

1. Zimmermann M, "New CAD", CAM materials and blocks for chairside procedures, 2013, pp.16, 173~181
2. Lise DP, "Microtensile bond strength of composite cement to novel CAD", CAM materials as a function of surface treatment and aging, 2017, pp.42, 73~81
3. Della Bona A, "Characterization of a polymer-infiltrated ceramic-network material", Dent Mater, 30, pp.564~569 (2014)
4. Coldea A, "Mechanical properties of polymer-infiltrated-ceramic-network materials", Dent Mater, 29, pp.419~426 (2013)
5. Steinbrenner H, "Multichromatic and highly translucent hybrid ceramic Vita Enamic", Int J Comput Dent, 21, pp.239~250 (2018)
6. Dauti R, "Micro-CT evaluation of marginal and internal fit of cemented polymer infiltrated ceramic network material crowns manufactured after conventional and digital impressions", J Prosthodont Res, 63, pp.40~46 (2019)
7. Xu Z, "A comparative study on the wear behavior of a polymer infiltrated ceramic network(PICN)material and tooth enamel", Dent Mater, 33, pp.1351~1361 (2017)
8. Moraes RR, "Light-activation of resin cement through ceramic : relationship between irradiance intensity and bond strength to dentin", J Biomed Mater Res B Appl Biomater, 85, pp.160~165 (2008)
9. Turp V, "Influence of zirconia base and shade difference on polymerization efficiency of dual-cure resin cement", J Prosthodont, 20, pp.361~365 (2011)
10. Dewaele M, "Volume contraction in photocured dental resins : the shrinkage-conversion relationship revisited", Dent Mater, 22, pp.359~365 (2006)
11. Jung H, "Curing efficiency of different polymerization methods through ceramic restorations", Clin Oral Investig, 5, pp.156~161 (2001)
12. Silva EM, "Long-term degradation of resin-based cements in substances present in the oral environment : influence of activation mode", J Appl Oral Sci, 21, pp.271~277 (2013)
13. Collares FM, "Discrepancies in degree of conversion measurements by FTIR", Braz Oral Res, 27, pp.453~454 (2013)
14. Smith BC, "Fundamentals of Fourier Transform Infrared Spectroscopy", pp.1~17 (2011), Taylor & Francis Group
15. Caprak YO, "Does the translucency of novel monolithic CAD", CAM materials affect resin cement polymerization with different curing modes?, 2019, pp.28, e572~e579
16. Neumann MG, "Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units", J Dent, 33, pp.525~532 (2005)
17. Jung H, "Polymerization efficiency of different photocuring units through ceramic discs", Oper Dent, 31, pp.68~77 (2006)
18. Lopes Cde C, "Degree of conversion and mechanical properties of resin cements cured through different all-ceramic systems", Braz Dent J, 26, pp.484~489 (2015)
19. Calgaro PA, "Influence of the interposition of ceramic spacers on the degree of conversion and the hardness of resin cements", Braz Oral Res, 27, pp.403~409 (2013)
20. Turgut S, "Effect of ultraviolet aging on translucency of resin-cemented ceramic veneers : an in vitro study", J Prosthodont, 23, pp.39~44 (2014)
21. Vichi A, "Translucency of ceramic materials for CEREC CAD", CAM system, 2014, pp.26, 224~231
22. Wang F, "Translucency of dental ceramics with different thicknesses", J Prosthet Dent, 110, pp.14~20 (2013)
23. Peixoto RT, "Light transmission through porcelain", Dent Mater, 23, pp.1363~1368 (2007)
24. Al-Juaila E, "Comparison of translucency for different thicknesses of recent types of esthetic zirconia ceramics versus conventional ceramics", Future Dent J, 4, pp.297~301 (2018)
25. Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
26. Heffernan MJ, "Relative translucency of six all-ceramic systems. Part II: core and veneer materials", J Prosthet Dent, 88, pp.10~15 (2002)
27. Runnacles P, "Degree of conversion of a resin cement lightcured through ceramic veneers of different thicknesses and types", Braz Dent J, 25, pp.38~42 (2014)
28. Cho SH, "Effect of different thicknesses of pressable ceramic veneers on polymerization of light-cured and dual-cured resin cements", J Contemp Dent Pract, 16, pp.347~352 (2015)
29. Novais VR, "Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes", J Appl Oral Sci, 25, pp.61~68 (2017)
30. Passos SP, "Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR", Dent Mater, 29, pp.317~323 (2013)
31. Kilinc E, "The effect of ceramic restoration shade and thickness on the polymerization of light-and dual-cure resin cements", Oper Dent, 36, pp.661~669 (2011)
32. Akgungor G, "Influence of ceramic thickness and polymerization mode of a resin luting agent on early bond strength and durability with a lithium disilicatebased ceramic system", J Prosthet Dent, 94, pp.234~241 (2005)
33. Ilie N, "Correlation between ceramics translucency and polymerization efficiency through ceramics", Dent Mater, 24, pp.908~914 (2008)
34. Yan YL, "Changes in degree of conversion and microhardness of dental resin cements", Oper Dent, 35, pp.203~210 (2010)
35. Kılıçarslan MA, "Influence of ceramic shade and thickness on the polymerization depth of different resin luting cements", Turkiye Klinikleri J Dental Sci, 14, pp.129~136 (2008)
36. Reis AF, "Efficiency of polymerization of bulk-fill composite resins : a systematic review", Braz Oral Res, 31, pp.e59~ (2017)
37. Meng X, "Hardness development of dual-cured resin cements through different thicknesses of ceramics", Dent Mater J, 25, pp.132~137 (2006)
38. Albino LG, "Knoop microhardness and FT-Raman evaluation of composite resins : influence of opacity and photoactivation source", Braz Oral Res, 25, pp.267~273 (2011)

관련 논문AI추천