Microhardness of resin cements after light activation through various translucencies of monolithic zirconia

키워드

참고문헌 (49)

1. Akagawa Y, "Comparison between freestanding and tooth-connected partially stabilized zirconia implants after two years’function in monkeys : a clinical and histologic study", J Prosthet Dent, 80, pp.551~558 (1998)
2. Ichikawa Y, "Tissue compatibility and stability of a new zirconia ceramic in vivo", J Prosthet Dent, 68, pp.322~326 (1992)
3. Miyazaki T, "Current status of zirconia restoration", J Prosthodont Res, 57, pp.236~261 (2013)
4. Denry I, "State of the art of zirconia for dental applications", Dent Mater, 24, pp.299~307 (2008)
5. Vagkopoulou T, "Zirconia in dentistry: part 1. Discovering the nature of an upcoming bioceramic", Eur J Esthet Dent, 4, pp.130~151 (2009)
6. Koenig V, "Clinical risk factors related to failures with zirconia-based restorations : an up to 9-year retrospective study", J Dent, 41, pp.1164~1174 (2013)
7. McLaren EA, "New high-translucent cubic-phase-containing zirconia : clinical and laboratory considerations and the effect of air abrasion on strength", Compend Contin Educ Dent, 38, pp.e13~e16 (2017)
8. Xiong Y, "Preparation of transparent 3y-tzp nanoceramics with no low-temperature degradation", J Am Ceram Soc, 97, pp.1402~1406 (2014)
9. Zhang F, "Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation", Acta Biomater, 16, pp.215~222 (2015)
10. Zhang H, "Effect of alumina dopant on transparency of tetragonal zirconia", J Nanomater, 2012, pp.1~5 (2012)
11. Zhang F, "Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations", Dent Mater, 32, pp.e327~e337 (2016)
12. Zhang Y, "Making yttria-stabilized tetragonal zirconia translucent", Dent Mater, 30, pp.1195~1203 (2014)
13. Zhang Y, "Novel zirconia materials in dentistry", J Dent Res, 97, pp.140~147 (2018)
14. Ghosh A, "Nanocrystalline zirconia-yttria system–a raman study", Mater Lett, 60, pp.1170~1173 (2006)
15. Sulaiman TA, "Optical properties and light irradiance of monolithic zirconia at variable thicknesses", Dent Mater, 31, pp.1180~1187 (2015)
16. Shahmiri R, "Optical properties of zirconia ceramics for esthetic dental restorations : A systematic review", J Prosthet Dent, 119, pp.36~46 (2018)
17. Blatz MB, "In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion", Clin Oral Investig, 14, pp.187~192 (2010)
18. Peutzfeldt A, "Adhesive systems : effect on bond strength of incorrect use", J Adhes Dent, 4, pp.233~242 (2002)
19. Re D, "The effect of surface treatment on the adhesion of resin cements to Y-TZP", Eur J Esthet Dent, 3, pp.186~196 (2008)
20. Pekkan G, "Comparative radiopacity of conventional and full-contour Y-TZP ceramics", Dent Mater J, 35, pp.257~263 (2016)
21. Ilie N, "Quantification of the amount of blue light passing through monolithic zirconia with respect to thickness and polymerization conditions", J Prosthet Dent, 113, pp.114~121 (2015)
22. Sulaiman TA, "Degree of conversion of dual-polymerizing cements light polymerized through monolithic zirconia of different thicknesses and types", J Prosthet Dent, 114, pp.103~108 (2015)
23. Sen N, "Microstructural, physical, and optical characterization of high-translucency zirconia ceramics", J Prosthet Dent, 123, pp.761~768 (2020)
24. Church TD, "Translucency and strength of high-translucency monolithic zirconium oxide materials", Gen Dent, 65, pp.48~52 (2017)
25. Manziuc MM, "Optical properties of translucent zirconia : a review of the literature", Eurobiotech J, 3, pp.45~51 (2019)
26. Spitznagel FA, "CAD", CAM ceramic restorative materials for natural teeth, 2018, pp.97, 1082~1091
27. Novais VR, "Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes", J Appl Oral Sci, 25, pp.61~68 (2017)
28. Alovisi M, "Influence of polymerization time on properties of dual-curing cements in combination with high translucency monolithic zirconia", J Prosthodont Res, 62, pp.468~472 (2018)
29. Ferracane JL, "Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins", Dent Mater, 1, pp.11~14 (1985)
30. Hofmann N, "Comparison of photo-activation versus chemical or dual-curing of resin-based luting cements regarding flexural strength, modulus and surface hardness", J Oral Rehabil, 28, pp.1022~1028 (2001)
31. Reges RV, "In-depth polymerization of dual-cured resin cement assessed by hardness", J Biomater Appl, 23, pp.85~96 (2008)
32. De Souza G, "Correlation between clinical performance and degree of conversion of resin cements : a literature review", J Appl Oral Sci, 23, pp.358~368 (2015)
33. Yan YL, "Changes in degree of conversion and microhardness of dental resin cements", Oper Dent, 35, pp.203~210 (2010)
34. Lopes Cde C, "Degree of conversion and mechanical properties of resin cements cured through different all-ceramic systems", Braz Dent J, 26, pp.484~489 (2015)
35. Camposilvan E, "Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications", Dent Mater, 34, pp.879~890 (2018)
36. Barbon FJ, "Inorganic filler content of resin-based luting agents and the color of ceramic veneers", Braz Oral Res, 32, pp.e49~ (2018)
37. Kim KH, "The effect of filler loading and morphology on the mechanical properties of contemporary composites", J Prosthet Dent, 87, pp.642~649 (2002)
38. Rangreez TA, "Applications of nanocomposite materials in dentistry", pp.205~224 (2019), Woodhead Publishing
39. Ciccone-Nogueira JC, "Microhardness of composite resins at different depths varying the post-irradiation time", J Appl Oral Sci, 15, pp.305~309 (2007)
40. Tarumi H, "Post-irradiation polymerization of composites containing bis-GMA and TEGDMA", Dent Mater, 15, pp.238~242 (1999)
41. Craig RG, "Craig’s restorative dental materials", pp.161~198 (2006), Mosby Elsevier
42. Marghalani HY, "Post-irradiation vickers microhardness development of novel resin composites", J Mater Res, 13, pp.81~87 (2010)
43. Braga RR, "Mechanical properties of resin cements with different activation modes", J Oral Rehabil, 29, pp.257~262 (2002)
44. Kumbuloglu O, "A study of the physical and chemical properties of four resin composite luting cements", Int J Prosthodont, 17, pp.357~363 (2004)
45. Lu H, "Influence of polymerization mode on flexural properties of esthetic resin luting agents", J Prosthet Dent, 94, pp.549~554 (2005)
46. Guiraldo RD, "Light energy transmission through composite influenced by material shades", Bull Tokyo Dent Coll, 50, pp.183~190 (2009)
47. Moreno MBP, "Effect of ceramic interposition and post-activation times on knoop hardness of different shades of resin cement", Braz Dent J, 29, pp.76~81 (2018)
48. Bandéca MC, "Changes on degree of conversion of dual-cure luting light-cured with blue LED", Laser Phys, 19, pp.1050~1055 (2009)
49. Fonseca RG, "The influence of chemical activation on hardness of dual-curing resin cements", Braz Oral Res, 18, pp.228~232 (2004)

관련 논문AI추천