Stress distribution in premolars restored with inlays or onlays: 3D finite element analysis
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
PURPOSE. To analyze stress distribution in premolars restored with inlays or onlays using various materials. MATERIALS AND METHODS. Three-dimensional maxillary premolar models of abutments were designed to include the following: 1) inlay with O cavity (O group), 2) inlay with MO cavity (MO group), 3) inlay with MOD cavity (MOD group), and 4) onlay (ONLAY group). A restoration of each inlay or onlay cavity was simulated using gold alloy, e.max ceramic, or composite resin for restoration. To simulate masticatory forces, a total of 140 N static axial force was applied onto the tooth at the occlusal contact areas. A finite element analysis was performed to predict the magnitude and pattern of stresses generated by occlusal loading. RESULTS. Maximum von Mises stress values generated in the abutment teeth of the ONLAY group were ranged from 26.1 to 26.8 MPa, which were significantly lower than those of inlay groups (O group: 260.3-260.7 MPa; MO group: 252.1-262.4 MPa; MOD group: 281.4-298.8 MPa). Maximum von Mises stresses generated with ceramic, gold, and composite restorations were 280.1, 269.9, and 286.6 MPa, respectively, in the MOD group. They were 252.2, 248.0, 255.1 MPa, respectively, in the ONLAY group. CONCLUSION. The onlay design (ONLAY group) protected tooth structures more effectively than inlay designs (O, MO, and MOD groups). However, stress magnitudes in restorations with various dental materials exhibited no significant difference among groups (O, MO, MOD, ONLAY).
Abstract
PURPOSE. To analyze stress distribution in premolars restored with inlays or onlays using various materials. MATERIALS AND METHODS. Three-dimensional maxillary premolar models of abutments were designed to include the following: 1) inlay with O cavity (O group), 2) inlay with MO cavity (MO group), 3) inlay with MOD cavity (MOD group), and 4) onlay (ONLAY group). A restoration of each inlay or onlay cavity was simulated using gold alloy, e.max ceramic, or composite resin for restoration. To simulate masticatory forces, a total of 140 N static axial force was applied onto the tooth at the occlusal contact areas. A finite element analysis was performed to predict the magnitude and pattern of stresses generated by occlusal loading. RESULTS. Maximum von Mises stress values generated in the abutment teeth of the ONLAY group were ranged from 26.1 to 26.8 MPa, which were significantly lower than those of inlay groups (O group: 260.3-260.7 MPa; MO group: 252.1-262.4 MPa; MOD group: 281.4-298.8 MPa). Maximum von Mises stresses generated with ceramic, gold, and composite restorations were 280.1, 269.9, and 286.6 MPa, respectively, in the MOD group. They were 252.2, 248.0, 255.1 MPa, respectively, in the ONLAY group. CONCLUSION. The onlay design (ONLAY group) protected tooth structures more effectively than inlay designs (O, MO, and MOD groups). However, stress magnitudes in restorations with various dental materials exhibited no significant difference among groups (O, MO, MOD, ONLAY).
참고문헌 (23)
- Shillingburg HT, "Fundamentals of fixed prosth- odontics", pp.193~227 (2012), Quintessence
- Reeh ES, "Reduction in tooth stiffness as a result of endodontic and restorative procedures", J Endod, 15, pp.512~516 (1989)[DOI]
- Stappert CF, "All-ceramic partial coverage premolar restorations. Cavity preparation design, reliability and fracture resistance after fatigue", Am J Dent, 18, pp.275~280 (2005)
- Arnelund CF, "Five-year evaluation of two resin-retained ceramic systems: a retrospective study in a general practice setting", Int J Prosthodont, 17, pp.302~306 (2004)
- Cubas GB, "Fracture resistance of premolars restored with inlay and onlay ceramic restorations and luted with two different agents", J Prosthodont Res, 55, pp.53~59 (2011)[DOI]
- Kantardzic I, "Influence of cavity design preparation on stress values in maxillary premolar: a finite element analysis", Croat Med J, 53, pp.568~576 (2012)[DOI]
- Christensen GJ, "The coming demise of the cast gold restoration?", J Am Dent Assoc, 127, pp.1233~1236 (1996)[DOI]
- Costa A, "The influence of elastic modulus of inlay materials on stress distribution and fracture of premolars", Oper Dent, 39, pp.E160~E170 (2014)[DOI]
- Mondelli J, "Fracture strength of human teeth with cavity preparations", J Prosthet Dent, 43, pp.419~422 (1980)[DOI]
- Dejak B, "Strength estimation of different designs of ceramic inlays and onlays in molars based on the Tsai-Wu failure criterion", J Prosthet Dent, 98, pp.89~100 (2007)[DOI]
- Yamanel K, "Effects of different ceramic and composite materials on stress distribution in inlay and onlay cavities: 3-D finite element analysis", Dent Mater J, 28, pp.661~670 (2009)[DOI]
- Jiang W, "Stress distribution in molars restored with inlays or onlays with or without endodontic treatment: a three-dimensional finite element analysis", J Prosthet Dent, 103, pp.6~12 (2010)[DOI]
- Zarone F, "Evaluation of the biomechanical behavior of maxillary central incisors restored by means of endocrowns compared to a natural tooth: a 3D static linear finite elements analysis", Dent Mater, 22, pp.1035~1044 (2006)[DOI]
- Ereifej N, "Experimental and FE shear-bonding strength at core", veneer interfaces in bilayered ceramics, 2011, pp.27, 590~597
- 문세영, "Three-dimensional finite element analysis of platform switched implant", The Journal of Advanced of Prosthodontics, 9(1), pp.31~37 (2017), 대한치과보철학회[DOI]
- 송호용, "A two-short-implant-supported molar restoration in atrophic posterior maxilla: A finite element analysis", The Journal of Advanced of Prosthodontics, 8(4), pp.304~312 (2016), 대한치과보철학회[DOI]
- Ausiello P, "Numerical fatigue 3D-FE modeling of indirect composite-restored posterior teeth", Dent Mater, 27, pp.423~430 (2011)[DOI]
- St-Georges AJ, "Fracture resistance of prepared teeth restored with bonded inlay restorations", J Prosthet Dent, 89, pp.551~557 (2003)[DOI]
- Cohen S, "A demographic analysis of vertical root fractures", J Endod, 32, pp.1160~1163 (2006)[DOI]
- Thompson MC, "The all-ceramic, inlay supported fixed partial denture. Part 1. Ceramic inlay preparation design: a literature review", Aust Dent J, 55, pp.120~127 (2010)[DOI]
- Frankenberger R, "Leucite-reinforced glass ceramic inlays and onlays after 12 years", J Adhes Dent, 10, pp.393~398 (2008)
- Tang CB, "Nonlinear finite element analysis of three implantabutment interface designs", Int J Oral Sci, 4, pp.101~108 (2012)[DOI]
- Molin MK, "A randomized 5-year clinical evaluation of 3 ceramic inlay systems", Int J Prosthodont, 13, pp.194~200 (2000)