STRESS DISTRIBUTION OF ENDODONTICALLY TREATED MAXILLARY SECOND PREMOLARS RESTORED WITH DIFFERENT METHODS: THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The purpose of this study was to evaluate the influence of elastic modulus of restorative materials and the number of interfaces of post and core systems on the stress distribution of three differently restored endodontically treated maxillary second premolars using 3D FE analysis. Model 1, 2 was restored with a stainless steel or glass fiber post and direct composite resin. A PFG or a sintered alumina crown was considered. Model 3 was restored by EndoCrown. An oblique 500 N was applied on the buccal (Load A) and palatal (Load B) cusp. The von Mises stresses in the coronal and root structure of each model were analyzed using ANSYS. The elastic modulus of the definitive restorations rather than the type of post and core system was the primary factor that influenced the stress distribution of endodontically treated maxillary premolars. The stress concentration at the coronal structure could be lowered through the use of definitive restoration of high elastic modulus. The stress concentration at the root structure could be lowered through the use of definitive restoration of low elastic modulus.
Abstract
The purpose of this study was to evaluate the influence of elastic modulus of restorative materials and the number of interfaces of post and core systems on the stress distribution of three differently restored endodontically treated maxillary second premolars using 3D FE analysis. Model 1, 2 was restored with a stainless steel or glass fiber post and direct composite resin. A PFG or a sintered alumina crown was considered. Model 3 was restored by EndoCrown. An oblique 500 N was applied on the buccal (Load A) and palatal (Load B) cusp. The von Mises stresses in the coronal and root structure of each model were analyzed using ANSYS. The elastic modulus of the definitive restorations rather than the type of post and core system was the primary factor that influenced the stress distribution of endodontically treated maxillary premolars. The stress concentration at the coronal structure could be lowered through the use of definitive restoration of high elastic modulus. The stress concentration at the root structure could be lowered through the use of definitive restoration of low elastic modulus.
참고문헌 (38)
- Nagasiri R, "Long-term survival of endodontically treated molars without crown coverage: a retrospective cohort study", J Prosthet Dent, 93, pp.164~170 (2005)
- Teixeira EC, "An in vitro assessment of prefabricated fiber post system", J Am Dent Assoc, 137, pp.1006~1012 (2006)
- Maccari PC, "Fracture resistance of endodontically treated teeth restored with three different prefabricated esthetic posts", J Esthet Restor Dent, 15, pp.25~30 (2003)
- Zalkind M, "Esthetic considerations in restoring endodontically treated teeth with posts and cores", J Prosthet Dent, 79, pp.702~705 (1998)
- Cheung W, "A review of the management of endodontically treated teeth", Post, core and the final restoration J Am Dent Assoc, 136, pp.611~619 (2005)
- Lassila LV, "Flexural properties of fiber reinforced root canal posts", Dent Mater, 20, pp.29~36 (2004)
- Genovese K, "Finite element analysis of a new customized composite post system for endodontically treated teeth", J Biomech, 38, pp.2375~2389 (2005)
- Fernandes AS, "Factors determining post selection: a literature review", J Prosthet Dent, 90, pp.556~562 (2003)
- Baldissara P, "Fatigue resistance of restored endodontically treated teeth: a multiparametric analysis", Int J Prosthodont, 19, pp.25~27 (2006)
- Zarone F, "Evaluation of the biomechanical behavior of maxillary central incisors restored by means of endocrowns compared to a natural tooth: a 3D static linear finite elements analysis", Dent Mater, 22, pp.1035~1044 (2006)
- Ortega VL, "Evaluation of fracture resistance of endodontically treated maxillary premolars, restored with ceromer or heat-pressed ceramic inlays and fixed with dual-resin cements", J Oral Rehabil, 31, pp.393~397 (2004)
- Otto T, "Computer-aided direct all-ceramic crowns: preliminary 1-year results of a prospective clinical study", Int J Periodontics Restorative Dent, 24, pp.446~455 (2004)
- Cohen BI, "Pilot study comparing the photoelastic stress distribution for four endodontic post systems", J Oral Rehabil, 23, pp.679~685 (1996)
- Ross RS, "A comparison of strains generated during placement of five endodontic posts", J Endod, 17, pp.450~456 (1991)
- 이형모, "교합하중이 치경부 응력분포에 미치는 영향에 관한 3차원 유한요소법적 연구", 대한치과보존학회지, 31(6), pp.427~436 (2006), 대한치과보존학회
- Toparli M, "Stress analysis in a post-restored tooth utilizing the finite element method", J Oral Rehabil, 30, pp.470~476 (2003)
- 박정길, "탄성계수가 다른 복합레진의 혼합수복이 5급 수복물의 응력분포에 미치는 영향에 관한 3차원 유한요소법적 연구", 대한치과보존학회지, 33(3), pp.184~197 (2008), 대한치과보존학회
- Lanza A, "3D FEA of cemented steel, glass and carbon posts in a maxillary incisor", Dent Mater, 21, pp.709~715 (2005)
- Rosenstiel, Land, "Fujimoto Textbook of contemporary fixed prostodontics 3rd edition Mosby", pp.216~229 (2001)
- Cheong YK, "A comparison of post and core techniques with finite element analysis", J Kor Acad Cons Dent, 21, pp.70~86 (1996)
- Cormier CJ, "In vitro comparison of the fracture resistance and failure mode of fiber, ceramic, and conventional post systems at various stages of restoration", J Esthet Restor Dent, 15, pp.313~318 (2003)
- Butz F, "Survival rate and fracture strength of endodontically treated maxillary incisors with different post and core system", Int J Prosthodont, 14, pp.58~64 (2001)
- Mannocci F, "Intermittent loading of teeth restored using quartz fiber, and zirconium dioxide ceramic root canal posts", J Adhes Dent, 1, pp.153~158 (1999)
- Rosentritt M, "Comparison of in vitro fracture strength of metallic and tooth-coloured post and cores", J Oral Rehabil, 27, pp.595~601 (2000)
- Akayan B, "Resistance to fracture of endodontically treated teeth restored with different post systems", J Prosthet Dent, 87, pp.431~437 (2002)
- Assif D, "Photoelastic analysis of stress transfer by endodontically treated teeth to the supporting structure using different restorative techniques", J Prosthet Dent, 61, pp.535~543 (1989)
- Akkayan B, "An in vitro study evaluating the effect of ferrule length on fracture resistance of endodontically treated teeth restored with fiber-reinforced and zirconia dowel systems", J Prosthet Dent, 92, pp.155~162 (2004)
- Dietschi D, "Adaptation of adhesive posts and cores to dentin after fatigue testing", Int J Prosthodont, 10, pp.498~507 (1997)
- Hunter AJ, "The restoration of endodontically treated teeth. Part 3. Cores", Aust Dent J, 34, pp.115~121 (1989)
- Pegoretti A, "Finite element analysis of a glass fibre reinforced composite endodontic post", Biomaterials, 23, pp.2667~2682 (2002)
- Stricker EJ, "Influence of different posts and cores on marginal adaptation, fracture resistance, and fracture mode of composite resin crowns on human mandibular premolars. An in vitro study", J Dent, 34, pp.326~335 (2006)
- Oyar P, "The element analysis of stress distribution of 2 different tooth preparation designs in porcelain-fused-to-metal crowns", Int J Prosthodont, 19, pp.85~91 (2006)
- Williams KR, "A finite element stress analysis of an endodontically restored tooth", Eng Med, 13, pp.167~173 (1984)
- Cailleteau JG, "A comparison of intracanal stresses in a post-restored tooth utilizing the finite element method", J Endod, 18, pp.540~544 (1992)
- Albuquerque Rde C, "Stress analysis of an upper central incisor restored with different posts", J Oral Rehabil, 30, pp.936~943 (2003)
- Hayashi M, "Fracture resistance of pulpless teeth restored with post-cores and crowns", Dent Mater, 22, pp.477~485 (2006)
- Gu XH, "Fracture resistance of crowned incisors with different post systems and luting agents", J Oral Rehabil, 33, pp.918~923 (2006)
- Newman MP, "Fracture resistance of endodontically treated teeth restored with composite posts", J Prosthet Dent, 89, pp.360~367 (2003)