EFFECT OF RESTORATION TYPE ON THE STRESS DISTRIBUTION OF ENDODONTICALLY TREATED MAXILLARY PREMOLARS; THREE-DIMENSIONAL FINITE ELEMENT STUDY
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to investigate the effects of four restorative materials under various occlusal loading conditions on the stress distribution at the CEJ of buccal, palatal surface and central groove of occlusal surface of endodontically treated maxillary second premolar, using a 3D finte element analysis. A 3D finite element model of human maxillary second premolar was endodontically treated. After endodontic treatment, access cavity was filled with Amalgam, resin, ceramic or gold of different mechanical properties. A static 500N forces were applied at the buccal (Load-1) and palatal cusp (Load-2) and a static 170N forces were applied at the mesial marginal ridge and palatal cusp simultaneously as centric occlusion (Load-3). Under 3-type Loading condition, the value of tensile stress was analyzed after 4-type restoration at the CEJ of buccal and palatal surface and central groove of occlusal surface Excessive high tensile stresses were observed along the palatal CEJ in Load-1 case and buccal CEJ in Load-2 in all of the restorations. There was no difference in magnitude of stress in relation to the type of restorations. Heavy tensile stress concentrations were observed around the loading point and along the central groove of occlusal surface in all of the restorations. There was slight difference in magnitude of stress between different types of restorations. High tensile stress concentrations around the loading points were observed and there was no difference in magnitude of stress between different types of restorations in Load- 3.
Abstract
The purpose of this study was to investigate the effects of four restorative materials under various occlusal loading conditions on the stress distribution at the CEJ of buccal, palatal surface and central groove of occlusal surface of endodontically treated maxillary second premolar, using a 3D finte element analysis. A 3D finite element model of human maxillary second premolar was endodontically treated. After endodontic treatment, access cavity was filled with Amalgam, resin, ceramic or gold of different mechanical properties. A static 500N forces were applied at the buccal (Load-1) and palatal cusp (Load-2) and a static 170N forces were applied at the mesial marginal ridge and palatal cusp simultaneously as centric occlusion (Load-3). Under 3-type Loading condition, the value of tensile stress was analyzed after 4-type restoration at the CEJ of buccal and palatal surface and central groove of occlusal surface Excessive high tensile stresses were observed along the palatal CEJ in Load-1 case and buccal CEJ in Load-2 in all of the restorations. There was no difference in magnitude of stress in relation to the type of restorations. Heavy tensile stress concentrations were observed around the loading point and along the central groove of occlusal surface in all of the restorations. There was slight difference in magnitude of stress between different types of restorations. High tensile stress concentrations around the loading points were observed and there was no difference in magnitude of stress between different types of restorations in Load- 3.
참고문헌 (29)
- Hannig C, "Fracture resistance of endodontically treated maxillary premolars restored with CAD", CAM ceramic inlays, 2005, pp.94, 342~349
- Panitvisai P, "Cuspal deflection in molars in relation to endodontic and restorative procedures", J Endod, 21, pp.57~61 (1995)
- Reeh ES, "Reduction in tooth stiffness as a result of endodontic and restorative procedures", J Endod, 15, pp.512~516 (1989)
- Trope M, "Resistance to fracture of restored endodontically treated premolars", Endod Dent Traumatol, 2, pp.35~38 (1986)
- Reeh ES, "Stiffness of endodontically-treated teeth related to restoration technique", J Dent Res, 68, pp.1540~1544 (1989)
- Sorensen JA, "Intracoronal reinforcement and coronal coverage: a study of endodontically treated teeth", J Prosthet Dent, 51, pp.780~784 (1984)
- Sedgley CM, "Are endodontically treated teeth more brittle?", J Endod, 18, pp.332~335 (1992)
- Hofmann N, "The effect of glass ionomer cement or composite resin bases on restoration of cuspal stiffness of endodontically treated premolars in vitro", Clin Oral Investig, 2, pp.77~83 (1998)
- Hernandez R, "Resistance to fracture of endodontically treated premolars restored with new generation dentine bonding systems", Int Endod J, 27, pp.281~284 (1994)
- Santos MJ, "Fracture Resistance of Maxillary Premolars Restored with Direct and Indirect Adhesive Techniques", J Can Dent Assoc, 71, pp.585~585 (2005)
- Hansen EK, "In vivo cusp fracture of endodontically treated premolars restored with MOD amalgam or MOD resin fillings", Dent Mater, 4, pp.169~173 (1998)
- Katona TR, "Stress analysis of a bulkfilled Class V light-cured composite restoration", J Dent Res, 73, pp.1470~1477 (1974)
- Geramy A, "Abfraction: 3D analysis by means of the finite element method", Quintessence Int, 34, pp.526~533 (2003)
- Lindehe J, "The anatomy of the periodontium, in Textbook of Clinical Periodontology", pp.19~69 (1989), Munksgaard
- Schroeder HE, "The normal periodontium, in Periodontal Diseases", pp.3~52 (1990), Lea & Fabiger
- Couegnat G, "Structural optimization of dental restorations using the principle of adaptive growth", Dent Mater, 22, pp.3~12 (2006)
- Suansuwan S, "New approach for evaluating metal-porcelain interfacial bonding", Int J Prosthodont, 12, pp.547~552 (1999)
- Ichim I, "Mechanical evaluation of cervical glass-ionomer restorations: 3D finite element study", J Dent, 35, pp.28~35 (2007)
- Widmalm SE, "Maximal bite force with centric and eccentric load", J Oral Rehabil, 9, pp.445~450 (1982)
- Litonjua LA, "An assessment of stress analyses in the theory of abfraction", Biomed Mater Eng, 14, pp.311~321 (2004)
- 이형모, "교합하중이 치경부 응력분포에 미치는 영향에 관한 3차원 유한요소법적 연구", Restorative Dentistry and Endodontics, 31(6), pp.427~436 (2006), 대한치과보존학회
- Lewinstein I, "Root dentin hardness of endodontically treated teeth", J Endod, 7, pp.421~422 (1981)
- Yettram AL, "Finite element stress analysis of the crowns of normal and restored teeth", J Dent Res, 55, pp.1004~1011 (1976)
- 박정길, "5급 복합레진수복물의 응력분포에 관한 3차원 유한요소법적 연구", 대한치과보존학회지, 33(1), pp.28~38 (2008), 대한치과보존학회
- 박정길, "탄성계수가 다른 복합레진의 혼합수복이 5급 수복물의 응력분포에 미치는 영향에 관한 3차원 유한요소법적 연구", 대한치과보존학회지, 33(3), pp.184~197 (2008), 대한치과보존학회
- Kuroe T, "Potential for load-induced cervical stress concentration as a function of periodontal support", J Esthet Dent, 11, pp.215~222 (1999)
- Milicich G, "Clinical presentations of stress distribution in teeth and the significance in operative dentistry", Pract Periodontics Aesthet Dent, 12, pp.695~700 (2000)
- Ortega VL, "evaluation of fracture resistance of endodontically treated maxillary premolars, restored with ceromer or heat-pressed ceramic inlays and fixed with dual-resin cements", J Oral Rehabil, 31, pp.393~397 (2004)
- Khera SC, "Anatomy of cusps of posterior teeth and their fracture potential", J Prosthet Dent, 64, pp.139~147 (1990)