Grain size, crystalline phase and fracture toughness of the monolithic zirconia

키워드

참고문헌 (40)

1. Chu SJ, "Fundamentals of color: shade matching and communication in esthetic dentistry", pp.19~40 (2004), Quintessence Publishing
2. Joiner A, "Tooth colour : a review of the literature", J Dent, 32, pp.3~12 (2004)
3. Walton JN, "A survey of crown and fixed partial denture failures : length of service and reasons for replacement", J Prosthet Dent, 56, pp.416~421 (1986)
4. Zarone F, "From porcelain-fused-to-metal to zirconia : clinical and experimental considerations", Dent Mater, 27, pp.83~96 (2011)
5. Ho GW, "Insights on ceramics as dental materials. Part I: ceramic material types in dentistry", Silicon, 3, pp.109~115 (2011)
6. Della Bona A, "The clinical success of all-ceramic restorations", J Am Dent Assoc, 139, pp.8S~13S (2008)
7. Marquardt P, "Survival rates of IPS empress 2all-ceramic crowns and fixed partial dentures : results of a 5-year prospective clinical study", Quintessence Int, 37, pp.253~259 (2006)
8. Sorensen JA, "A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic", Pract Periodont Aesthet Dent, 11, pp.95~106 (1999)
9. Guazzato M, "Influence of surface and heat treatments on the flexural strength of a glass-infiltrated alumina", zirconia-reinforced dental ceramic, 2005, pp.21, 454~463
10. Church TD, "Translucency and strength of high-translucency monolithic zirconium oxide materials", Gen Dent, 65, pp.48~52 (2017)
11. Dangra Z, "The use of newer high translucency zirconia in aesthetic zone", Case Rep Dent, 2014, pp.432714~ (2014)
12. İblkin Tuncel, "Evaluation of translucency of monolithic zirconia and framework zirconia materials", The Journal of Advanced of Prosthodontics, 8(3), pp.181~186 (2016), 대한치과보철학회[DOI]
13. Madfa A, "Use of zirconia in dentistry : an overview", Open Biomed Eng J, 5, pp.1~9 (2014)
14. Ikesue A, "Progress in ceramic lasers", Annual Review of Materials Research, 36, pp.397~429 (2006)
15. Zhang Y, "Making yttria-stabilized tetragonal zirconia translucent", Dent Mater, 30, pp.1195~1203 (2014)
16. Sen N, "Effect of coloring and sintering on the translucency and biaxial strength of monolithic zirconia", J Prosthet Dent, 119, pp.308~ (2018)
17. Stawarczyk B, "Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear", J Mech Behav Biomed Mater, 59, pp.128~138 (2016)
18. Stawarczyk B, "The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio", Clin Oral Investig, 17, pp.269~274 (2013)
19. Shahmiri R, "Optical properties of zirconia ceramics for esthetic dental restorations : A systematic review", J Prosthet Dent, 119, pp.36~46 (2018)
20. Jitwirachot K, "Wear behavior of different generations of zirconia : present literature", Int J Dent, 2022, pp.9341616~ (2022)
21. Zhang W, "The effect of microstructure control on mechanical properties of 12Ce-TZP via two-step sintering method", J Alloy Compd, 711, pp.686~692 (2017)
22. Moshtaghioun BM, "Grain size dependence of hardness and fracture toughness in pure near fully-dense boron carbide ceramics", J European Ceram Soc, 36, pp.1829~1834 (2016)
23. Anusavice KJ, "Phillps'Science of Dental Materials", pp.2013, Elsevier
24. Gauna M, "Monoclinic-tetragonal zirconia quantification of commercial nanopowder mixtures by XRD and DTA", Ceramics Silikaty, 59, pp.318~325 (2015)
25. Dahl GT, "Alumina-doped zirconia submicro-particles: synthesis, thermal stability, and microstructural characterization", Materials(Basel), 12, pp.2856~ (2019)
26. "EN 623-3: 2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)", ~
27. "ISO 24370. Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method", International Standard Organization (ISO), ~ (2005)
28. Filser F, "Net-shaping of ceramic components by direct ceramic machining", Assembl Autom, 23, pp.382~390 (2003)
29. Manziuc M, "Optical properties of translucent zirconia : A review of the literature", EuroBiotech J, 3, pp.45~51 (2019)
30. Srivastava KK, "Revised phase diagram of the system ZrO2-YOsub(1.5)", Trans J British Ceram Soc, 73, pp.85~91 (1974)
31. Srinivasan R, "Identification of tetragonal and cubic structures of zirconia using synchrotron x-radiation source", J Mater Res, 6, pp.1287~1292 (1991)
32. Harada K, "A comparative evaluation of the translucency of zirconias and lithium disilicate for monolithic restorations", J Prosthet Dent, 116, pp.257~263 (2016)
33. Zhang F, "Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations", Dent Mater, 32, pp.e327~e337 (2016)
34. Tekeli S, "A quantitative assessment of cavities in 3 mol% yttria-stabilized tetragonal zirconia specimens containing various grain size", Ceram Int, 28, pp.785~789 (2002)
35. Theunissen GSAM, "Mechanical properties of ultra-fine grained zirconia ceramics", J Mater Sci, 27, pp.4429~4438 (1992)
36. Tong H, "Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area", Ceram Int, 42, pp.1077~1085 (2016)
37. Chevalier J, "Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis", Biomaterials, 25, pp.5539~5545 (2004)
38. Denry I, "State of the art of zirconia for dental applications", Dent Mater, 24, pp.299~307 (2008)
39. Trunec M, "Effect of grain size on mechanical properties of 3Y-TZP ceramics", Ceramics Silikaty, 52, pp.165~171 (2008)
40. Heuer AH, "Stability of tetragonal ZrO2 particles in ceramic matrices", J American Ceram Soc, 65, pp.642~650 (1982)

관련 논문AI추천