Evaluation of translucency of monolithic zirconia and framework zirconia materials
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
PURPOSE. The opacity of zirconia is an esthetic disadvantage that hinders achieving natural and shade-matched restorations. The aim of this study was to evaluate the translucency of non-colored and colored framework zirconia and monolithic zirconia. MATERIALS AND METHODS. The three groups tested were: non-colored framework zirconia, colored framework zirconia with the A3 shade according to Vita Classic Scale, and monolithic zirconia (n=5). The specimens were fabricated in the dimensions of 15×12×0.5 mm. A spectrophotometer was used to measure the contrast ratio, which is indicative of translucency. Three measurements were made to obtain the contrast ratios of the materials over a white background (L*w) and a black background (L*b). The data were analyzed using the one-way analysis of variance and Tukey HSD tests. One specimen from each group was chosen for scanning electron microscope analysis. The determined areas of the SEM images were divided by the number of grains in order to calculate the mean grain size. RESULTS. Statistically significant differences were observed among all groups (P<.05). Non-colored zirconia had the highest translucency with a contrast ratio of 0.75, while monolithic zirconia had the lowest translucency with a contrast ratio of 0.8. The mean grain sizes of the noncolored, colored, and monolithic zirconia were 233, 256, and 361 nm, respectively. CONCLUSION. The translucency of the zirconia was affected by the coloring procedure and the grain size. Although monolithic zirconia may not be the best esthetic material for the anterior region, it may serve as an alternative in the posterior region for the bilayered zirconia restorations.
Abstract
PURPOSE. The opacity of zirconia is an esthetic disadvantage that hinders achieving natural and shade-matched restorations. The aim of this study was to evaluate the translucency of non-colored and colored framework zirconia and monolithic zirconia. MATERIALS AND METHODS. The three groups tested were: non-colored framework zirconia, colored framework zirconia with the A3 shade according to Vita Classic Scale, and monolithic zirconia (n=5). The specimens were fabricated in the dimensions of 15×12×0.5 mm. A spectrophotometer was used to measure the contrast ratio, which is indicative of translucency. Three measurements were made to obtain the contrast ratios of the materials over a white background (L*w) and a black background (L*b). The data were analyzed using the one-way analysis of variance and Tukey HSD tests. One specimen from each group was chosen for scanning electron microscope analysis. The determined areas of the SEM images were divided by the number of grains in order to calculate the mean grain size. RESULTS. Statistically significant differences were observed among all groups (P<.05). Non-colored zirconia had the highest translucency with a contrast ratio of 0.75, while monolithic zirconia had the lowest translucency with a contrast ratio of 0.8. The mean grain sizes of the noncolored, colored, and monolithic zirconia were 233, 256, and 361 nm, respectively. CONCLUSION. The translucency of the zirconia was affected by the coloring procedure and the grain size. Although monolithic zirconia may not be the best esthetic material for the anterior region, it may serve as an alternative in the posterior region for the bilayered zirconia restorations.
참고문헌 (46)
- Joiner A, "Tooth colour: a review of the literature", J Dent, 32, pp.3~12 (2004)
- Dietschi D, "Layering concepts in anterior composite restorations", J Adhes Dent, 3, pp.71~80 (2001)
- Kelly JR, "Ceramics in dentistry:historical roots and current perspectives", J Prosthet Dent, 75, pp.18~32 (1996)
- Spear F, "Which all-ceramic system is optimal for anterior esthetics?", J Am Dent Assoc, 139, pp.19S~24S (2008)
- Raptis NV, "Optical behavior of current ceramic systems", Int J Periodontics Restorative Dent, 26, pp.31~41 (2006)
- Kingery WD, "Introduction to ceramics", pp.646~689 (1976), John Wiley and Sons
- Pecho OE, "Optical behavior of dental zirconia and dentin analyzed by Kubelka-Munk theory", Dent Mater, 31, pp.60~67 (2015)
- Brodbelt RH, "Translucency of dental porcelains", J Dent Res, 59, pp.70~75 (1980)
- Clarke FJ, "Measurement of color of human teeth", Proceedings of the first international symposium on ceramics, pp.441~490 (1983)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Vagkopoulou T, "Zirconia in dentistry: Part 1. Discovering the nature of an upcoming bioceramic", Eur J Esthet Dent, 4, pp.130~151 (2009)
- Fernandez-Oliveras A, "Measurements of scattering anisotropy in dental tissue and zirconia ceramic", Proc SPIE, 8427, pp.48~ (2012)
- Husain Hatim Harianawala, "Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials", The Journal of Advanced of Prosthodontics, 6(6), pp.456~461 (2014), 대한치과보철학회[DOI]
- Aboushelib MN, "Effect of zirconia type on its bond strength with different veneer ceramics", J Prosthodont, 17, pp.401~408 (2008)
- Hjerppe J, "Effect of shading the zirconia framework on biaxial strength and surface microhardness", Acta Odontol Scand, 66, pp.262~267 (2008)
- Pecho OE, "Color and translucency of zirconia ceramics, human dentine and bovine dentine", J Dent, 40, pp.e34~e40 (2012)
- Aboushelib MN, "Microtensile bond strength of different components of core veneered all-ceramic restorations", Dent Mater, 21, pp.984~991 (2005)
- Kim HK, "Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia", Dent Mater, 30, pp.e229~e237 (2014)
- Stawarczyk B, "Zirconia ceramics, their contrast ratio and grain size depending on sintering parameters", Dent Mater J, 33, pp.591~598 (2014)
- "Zirkonzahn web site"[URL]
- Denry I, "State of the art of zirconia for dental applications", Dent Mater, 24, pp.299~307 (2008)
- Rhodes WH, "Controlled transient solid second-phase sintering of yttria", J Am Ceram Soc, 64, pp.13~19 (1981)
- Ebeid K, "Effect of changes in sintering parameters on monolithic translucent zirconia", Dent Mater, 30, pp.e419~e424 (2014)
- Chevalier J, "Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis", Biomaterials, 25, pp.5539~5545 (2004)
- Ruiz L, "Effect of heat treatment on grain size, phase assemblage, and mechanical properties of 3 mol%Y-TZP", J Am Ceram Soc, 79, pp.2331~2340 (1996)
- Scott HG, "Phase relationships in the zirconia-yttria system", J Mater Sci, 10, pp.1527~1535 (1975)
- Casolco SR, "Transparent", translucent polycrystalline nanostructured yttria stabilized zirconia with varying colors, 2008, pp.58, 516~519
- Lee YK, "Layered color of all-ceramic core and veneer ceramics", J Prosthet Dent, 97, pp.279~286 (2007)
- O’Brien WJ, "Double-layer color effects in porcelain systems", J Dent Res, 64, pp.940~943 (1985)
- Stawarczyk B, "The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio", Clin Oral Investig, 17, pp.269~274 (2013)
- Jiang L, "Effects of sintering temperature and particle size on the translucency of zirconium dioxide dental ceramic", J Mater Sci Mater Med, 22, pp.2429~2435 (2011)
- Tekeli S, "A quantitative assessment of cavities in 3 mol% yttria-stabilized tetragonal zirconia specimens containing various grain size", Ceram Int, 28, pp.785~789 (2002)
- Peelen JGJ, "Light scattering by pores in polycrystalline materials: Transmission properties of alumina", J Appl Phys, 45, pp.216~220 (1974)
- Zhang HB, "Optimization of high-pressure sintering of transparent zirconia with nano-sized grains", J Alloy Compd, 508, pp.196~199 (2010)
- 김미진, "Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency", The Journal of Advanced of Prosthodontics, 5(2), pp.161~166 (2013), 대한치과보철학회[DOI]
- Anselmi-Tamburini U, "Transparent nanometric cubic and tetragonal zirconia obtained by highpressure Ppulsed electric current sintering", Adv Funct Mater, 17, pp.3267~3273 (2007)
- Hayashi K, "Transmission optical properties of polycrystalline alumina with submicron grains", Mater Trans JIM, 32, pp.1024~1029 (1991)
- Apetz R, "Transparent alumina: A lightscattering model", J Am Ceram Soc, 86, pp.480~486 (2003)
- Ilkin Tuncel, "The effect of coloring liquids on the translucency of zirconia framework", The Journal of Advanced of Prosthodontics, 5(4), pp.448~451 (2013), 대한치과보철학회[DOI]
- "Prettau data sheet"[URL]
- "ICE Zirkon translucent data sheet"[URL]
- Antonson SA, "Contrast ratio of veneering and core ceramics as a function of thickness", Int J Prosthodont, 14, pp.316~320 (2001)
- Wang F, "Translucency of dental ceramics with different thicknesses", J Prosthet Dent, 110, pp.14~20 (2013)
- Sevcan Kurtulmus-Yilmaz, "Comparison of the translucency of shaded zirconia all-ceramic systems", The Journal of Advanced of Prosthodontics, 6(5), pp.415~422 (2014), 대한치과보철학회[DOI]
- Spyropoulou PE, "Translucency of shaded zirconia core material", J Prosthet Dent, 105, pp.304~307 (2011)
- Liu MC, "Human perception of dental porcelain translucency correlated to spectrophotometric measurements", J Prosthodont, 19, pp.187~193 (2010)