극저온 소재인 9% 니켈강의 파이버 레이저 용접 공정을 모사하는 유한요소 해석 모델의 연구 Part I. 열전달 해석을 통한 용접 열원 탐색
A Study for FEM Model Describing Fiber Laser Welding of 9% Nickel Steel Part I. Finding Heat Source Model with Heat Transfer Analysis of Bead on Plate Welding
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Due to environmental pollution, regulations on existing petroleum-based fuels are increasing day by day. LNG is in the spotlight as an eco-friendly fuel that does not emit NOx or SOx, but its boiling point is -163°C, so it needs to be handled with care. Materials that can be used at the above temperature are defined by IMO through the IGC Code. Among them, 9% nickel steel has great advantages in yield strength and tensile strength under cryogenic conditions, but it is difficult to use in arc welding such as FCAW for various reasons. This study is a study to apply fiber laser welding to solve this problem. As a previous study, this study conducted a study to find a welding heat source. After performing bead on plate welding, the optimal heat source was derived by analyzing the shape of the bead and adjusting the parameters of the heat source model. In this case, by applying the multi-island genetic algorithm, which is a global optimization algorithm, not the intuition of the researcher, accurate results could be derived in a wide range.
Abstract
Due to environmental pollution, regulations on existing petroleum-based fuels are increasing day by day. LNG is in the spotlight as an eco-friendly fuel that does not emit NOx or SOx, but its boiling point is -163°C, so it needs to be handled with care. Materials that can be used at the above temperature are defined by IMO through the IGC Code. Among them, 9% nickel steel has great advantages in yield strength and tensile strength under cryogenic conditions, but it is difficult to use in arc welding such as FCAW for various reasons. This study is a study to apply fiber laser welding to solve this problem. As a previous study, this study conducted a study to find a welding heat source. After performing bead on plate welding, the optimal heat source was derived by analyzing the shape of the bead and adjusting the parameters of the heat source model. In this case, by applying the multi-island genetic algorithm, which is a global optimization algorithm, not the intuition of the researcher, accurate results could be derived in a wide range.
참고문헌 (20)
- O. Schinas, "Feasibility and commercial considerations of LNG-fueled ships", Ocean Eng, 122, pp.84~96 (2016)
- H. Thomson, "Natural gas as a marine fuel", Energy Policy, 87, pp.153~167 (2015)
- 이진성, "An experimental study on fatigue performance of cryogenic metallic materials for IMO type B tank", International Journal of Naval Architecture and Ocean Engineering, 5(4), pp.580~597 (2013), 대한조선학회
- Huang, Z., "Effects of laser energy allocation on weld formation of 9% Ni steel made by narrow gap laser welding filled with nickel based alloy", J Laser Appl, 30, pp.032013~ (2018)
- Jaewoong Kim, "Laser Welding of ASTM A553-1 (9% Nickel Steel) (PART I: Penetration Shape by Bead on Plate)", Metals, 10(4), pp.484~ (2020), MDPI AG[DOI]
- Jaewoong Kim, "Laser Welding of ASTM A553-1 (9% Nickel Steel) (PART II: Comparison of Mechanical Properties with FCAW)", Metals, 10(8), pp.999~ (2020), MDPI AG[DOI]
- 김재웅, "A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel PART I : Proposal of a heat source model", International Journal of Naval Architecture and Ocean Engineering, 5(3), pp.348~363 (2013), 대한조선학회
- 표창민, "전역 최적화 알고리즘을 이용한 파이버 레이저 용접 열원 모델 구현에 관한 연구 Part I : 다층 용접 열원의 검증", 한국기계기술학회지, 23(2), pp.137~144 (2021), 한국기계기술학회[DOI]
- C. Pyo, "Estimation of Heat Source Model’s Parameters for GMAW with Non-linear Global Optimization—Part I: Application of Multi-island Genetic Algorithm", Metals, 10(7), pp.885~ (2020)
- J. Goldak, "A new finite element model for welding heat sources", MTB, 15, pp.299~305 (1984)
- John H. Chujutalli, "Experimental-based methodology for the double ellipsoidal heat source parameters in welding simulations", Marine Systems & Ocean Technology, 15(2), pp.110~123 (2020), Springer Science and Business Media LLC[DOI]
- Z. Gao, "Investigation on the weld bead profile transformation with the keyhole and molten pool dynamic behavior simulation in high power laser welding", International Journal of Heat and Mass Transfer, 116, pp.1304~1313 (2018)
- An overview of the state of art in laser welding simulation, "Optics & Laser Technology", 2016, 2~14
- F. Farrokhi, "A numerical model for full and partial penetration hybrid laser welding of thick-section steels", Optics & Laser Technology, 111, pp.671~686 (2019)
- G. Xu, "Adaptive volumetric heat source models for laser beam and laser + pulsed GMAW hybrid welding processes", The International Journal of Advanced Manufacturing Technology, 57, pp.245~255 (2011)
- A. Evdokimov, "Heat source model for laser beam welding of steel-aluminum lap joints", Int J Adv Manuf Technol, 93, pp.709~716 (2017)
- T. Kik, "Heat Source Models in Numerical Simulations of Laser Welding", Materials, 13(11), pp.2653~ (2020)
- Milad Moradi, "A Study on the Influence of Various Welding Sequence Schemes on the Gain in Strength of Square Hollow Section Steel T-Joint", 대한용접접합학회지, 35(4), pp.41~50 (2017), 대한용접접합학회[DOI]
- Minho Park, "A Study on Determining Weld Joint Hardening and a Quality Evaluation Algorithm for 9% Nickel Weld Joints Using the Dilution Ratio of the Base Material in Fiber Laser Welding", Metals, 11(8), pp.1308~ (2021), MDPI AG[DOI]
- H. Lee, "Calculation of Material Properties with JMatPro for the Process Simulation", Proceedings of the Korean Society for Technology of Plasticity Conference, pp.142~145 (2008)