개선된 레이저 용접 열원 적용 시 용접 속도에 따른 9% 니켈강의 열원 모델 파라미터 비교에 관한 연구
A Study on Change of Parameters of Laser Welding Heat Source Model Along Welding Speed with Enhanced Model
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
9% nickel steel has remarkable mechanical properties in a cryogenic condition and is widely used in storage containers for LNG fueled ships. Demand for laser welding rather than conventional arc welding has grown to increase manufacturing efficiency. However there are various types of heat sources which are suggested by other researchers. With that, it is difficult to select a proper heat source shape for welding conditions. The author proposed a representative heat source model that can cover most of suggested heat source models through previous studies. Welding power was fixed at 4kW and the speed was changed to 1.0m/min, 1.5m/min, and 2.0m/min respectively. The shapes of the welding heat sources were derived, and the tendency of the main parameters was also deducted. It was observed that the width and depth of the weld bead decreased as the welding speed increased through welding experiment, parameters of welding heat source are changed linearly. Based on this study, it is expected that it will be possible to estimate the shape of the heat source under untested welding conditions.
Abstract
9% nickel steel has remarkable mechanical properties in a cryogenic condition and is widely used in storage containers for LNG fueled ships. Demand for laser welding rather than conventional arc welding has grown to increase manufacturing efficiency. However there are various types of heat sources which are suggested by other researchers. With that, it is difficult to select a proper heat source shape for welding conditions. The author proposed a representative heat source model that can cover most of suggested heat source models through previous studies. Welding power was fixed at 4kW and the speed was changed to 1.0m/min, 1.5m/min, and 2.0m/min respectively. The shapes of the welding heat sources were derived, and the tendency of the main parameters was also deducted. It was observed that the width and depth of the weld bead decreased as the welding speed increased through welding experiment, parameters of welding heat source are changed linearly. Based on this study, it is expected that it will be possible to estimate the shape of the heat source under untested welding conditions.
참고문헌 (20)
- Van TC, "Global impacts of recent IMO regulations on marine fuel oil refining processes and ship emissions", Transportation Research Part D: Transport and Environment, 70, pp.123~134 (2019)
- Kim, J., "A Study on Fiber Laser Welding of High-Manganese Steel for Cryogenic Tanks", Processes, 8(12), pp.1536~ (2020)
- 나기범, "9% Ni강의 Alloy 625 용접재료 적용에서 GTAW와 FCAW의 고온균열 발생 특성 비교", 대한용접접합학회지, 37(4), pp.357~362 (2019), 대한용접접합학회[DOI]
- 김보언, "9 wt.% 니켈강 소재를 활용한 선박용 LNG Fuel Tank 초기 설계 및 용접부 성능 평가", 대한용접접합학회지, 37(6), pp.555~563 (2019), 대한용접접합학회[DOI]
- André Schneider, "Laser Beam Welding of Thick Titanium Sheets in the Field of Marine Technology", Physics Procedia, 56, pp.582~590 (2014)
- 최해운, "다중 특성을 가지는 레이저 빔 제어를 통한 열영향 해석", 한국기계가공학회지, 21(1), pp.8~14 (2022), 한국기계가공학회[DOI]
- Deng D., "Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plate bead-on joints", Materials & Design, 52, pp.720~729 (2013)
- 윤태종, "GBO를 이용한 9% Ni Steel의 필렛 레이저 용접 공정 최적화", 대한용접접합학회지, 38(5), pp.485~492 (2020), 대한용접접합학회[DOI]
- Farrokhi F., "A numerical model for full and partial penetration hybrid laser welding of thick-section steels", Optics & Laser Technology, 111, pp.671~686 (2019)
- Xu G., "Adaptive volumetric heat source models for laser beam and laser+pulsed GMAW hybrid welding processes", The International Journal of Advanced Manufacturing Technology, 57, pp.245~255 (2011)
- Kik T, "Heat Source Models in Numerical Simulations of Laser Welding", Materials, 13(11), pp.2653~ (2020)
- Wu C.S, "A new heat source model for keyhole plasma arc welding in FEM analysis of the temperature profile", Welding Journal, 85 (2006)
- Goldak J, "A new finite element model for welding heat sources", MTB, 15, pp.299~305 (1984)
- C. Pyo, "A study for Heat Source Model for Fiber Laser Welding with Global Optimization Algorithm Part Ⅲ : Analysis of the Parameters with Welding Power", Journal of the Korean Society of Mechanical Technology, 97(4), pp.492~498 (2021)
- Pyo C., "A Study on Welding Deformation in Fiber Laser Welding of 9% Nickel Steel through Finite Element Analysis Part I : Implementation of Welding Heat Source Model", Processes, 9, pp.2188~ (2021)[DOI]
- C. Pyo, "A study on a representative heat source model for simulating laser welding for liquid hydrogen storage containers", Marine Structures (2022)[DOI]
- Deng D, "FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects", Materials & Design, 30(2), pp.359~366 (2009)
- Deng D, "Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements", Computational Materials Science, 37(3), pp.269~277 (2006)
- Wang W., "Multi-Objective Aerodynamic Optimization Design Method of Compressor Rotor Based on Isight", Procedia Engineering, 15, pp.3699~3703 (2011)
- Hahn Y., "Design Study of Dovetail Geometries of Turbine Blades Using Abaqus and Isight", Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 7, pp.11~20 (2012)