전역 최적화 알고리즘을 이용한 파이버 레이저 용접 열원 모델 구현에 관한 연구 Part I : 다층 용접 열원의 검증
A Study for Heat Source Model for Fiber Laser Welding with Global Optimization AlgorithmPart I. Verification of Multi Layered Heat Source Model
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Welding is the most widely used technology for manufacturing in the automobile, and shipbuilding industries. Fiber laser welding is rapidly introduced into the field to minimize welding distortion and fast welding speed. Although it is advantageous to use finite element analysis to predict welding distortion and find optimized welding conditions, there are various heat source model for fiber laser welding. In this study, a welding heat source was proposed using a multi-layered heat source model that encompasses most of the existing various welding heat source models: conical shape, curved model, exponential model, conical-cylindrical model, and conical-conical model. A case study was performed through finite element analysis using the radius of each layer and the ratio of heat energy of the layer as variables, and the variables were found by comparing them with the actual experimental results. For case study, by applying Adaptive simulated annealing, one of the global optimization algorithms, we were able to find the heat source model more efficiently.
Abstract
Welding is the most widely used technology for manufacturing in the automobile, and shipbuilding industries. Fiber laser welding is rapidly introduced into the field to minimize welding distortion and fast welding speed. Although it is advantageous to use finite element analysis to predict welding distortion and find optimized welding conditions, there are various heat source model for fiber laser welding. In this study, a welding heat source was proposed using a multi-layered heat source model that encompasses most of the existing various welding heat source models: conical shape, curved model, exponential model, conical-cylindrical model, and conical-conical model. A case study was performed through finite element analysis using the radius of each layer and the ratio of heat energy of the layer as variables, and the variables were found by comparing them with the actual experimental results. For case study, by applying Adaptive simulated annealing, one of the global optimization algorithms, we were able to find the heat source model more efficiently.
참고문헌 (24)
- 김종도, "순 티타늄 박판의 파이버 레이저 용접시 결함 억제를 위한 연속의 출력 파형제어 특성(Ⅰ) - 슬롭 업 & 다운 적용에 따른 영향 -", 대한용접접합학회지, 34(6), pp.62~68 (2016), 대한용접접합학회
- J. Kim, "A Study on Fiber Laser Welding of High-Manganese Steel for Cryogenic Tanks", Processes, 8(12), pp.1536~ (2020)
- D. S. Kim, "A Study on Cross-Shaped Structure of Invar Material Using Cold Wire Laser Fillet Welding (PART I: Feasibility Study for Weldability)", Metals, 10(10), pp.1385~ (2020)
- J. Goldak, "A new finite element model for welding heat sources", MTB, 15, pp.299~305 (1984)
- John H. Chujutalli, "Experimental-based methodology for the double ellipsoidal heat source parameters in welding simulations", Marine Systems & Ocean Technology, 15(2), pp.110~123 (2020), Springer Science and Business Media LLC[DOI]
- Z. Gao, "Investigation on the weld bead profile transformation with the keyhole and molten pool dynamic behavior simulation in high power laser welding", International Journal of Heat and Mass Transfer, 116, pp.1304~1313 (2018)
- An overview of the state of art in laser welding simulation, "Optics & Laser Technology", 2016, 2~14
- 김재웅, "A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel PART I : Proposal of a heat source model", International Journal of Naval Architecture and Ocean Engineering, 5(3), pp.348~363 (2013), 대한조선학회
- F. Farrokhi, "A numerical model for full and partial penetration hybrid laser welding of thick-section steels", Optics & Laser Technology, 111, pp.671~686 (2019)
- G. Xu, "Adaptive volumetric heat source models for laser beam and laser + pulsed GMAW hybrid welding processes", The International Journal of Advanced Manufacturing Technology, 57, pp.245~255 (2011)
- A. Evdokimov, "Heat source model for laser beam welding of steel-aluminum lap joints", Int J Adv Manuf Technol, 93, pp.709~716 (2017)
- T. Kik, "Heat Source Models in Numerical Simulations of Laser Welding", Materials, 13(11), pp.2653~ (2020)
- C. Pyo, "Estimation of Heat Source Model’s Parameters for GMAW with Non-linear Global Optimization—Part I : Application of Multi-island Genetic Algorithm", Metals, 10(7), pp.885~ (2020)
- D. Deng, "FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects", Materials & Design, 30(2), pp.359~366 (2009)
- D. Deng, "Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements", Computational Materials Science, 37(3), pp.269~277 (2006)
- Milad Moradi, "A Study on the Influence of Various Welding Sequence Schemes on the Gain in Strength of Square Hollow Section Steel T-Joint", 대한용접접합학회지, 35(4), pp.41~50 (2017), 대한용접접합학회[DOI]
- W. Wang, "Multi-Objective Aerodynamic Optimization Design Method of Compressor Rotor Based on Isight", Procedia Engineering, 15, pp.3699~3703 (2011)
- Y. Hahn, "Design Study of Dovetail Geometries of Turbine Blades Using Abaqus and Isight", Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 7, pp.11~20 (2012)
- L. Zhang, "The mechanical properties and interface bonding mechanism of Molybdenum", SUS304L by laser beam welding with nickel interlayer, 2019, pp.182(15), 108002~
- N. Saunders, "Using JMatPro to model materials properties and behavior", The journal of the minerals, metals & materials society, 55, pp.60~65 (2003)
- H. Lee, "Calculation of Material Properties with JMatPro for the Process Simulation", Proceedings of the Korean Society for Technology of Plasticity Conference, pp.142~145 (2008)
- J. Lin, "Multi-agent simulated annealing algorithm with parallel adaptive multiple sampling for protein structure prediction in AB off-lattice model", Applied Soft Computing, 62, pp.491~503 (2018)
- V. Saini, "Parameter Optimization of SAW in Hardfacing Process Using Hybrid Approach of Adaptive Stimulated Annealing and Neural Networks", Asian Journal of Engineering and applied technology, 1(2), pp.16~20 (2012)
- "AISI Type 304L Stainless Steel" (2021)[URL]