개선된 레이저 용접 열원 모델을 활용한 9% 니켈강 최적 열원 모델 도출을 위한 연구
A Study on Estimating Optimal Model with Enhanced Laser Welding Heat Source Model for 9% Nickel Steel
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Due to environmental pollution, regulations on fossil fuels are required. There is a movement for the regulations by using LNG fueled propulsion ships. LNG is an eco-friendly fuel that does not emit NOx or SOx during combustion, but its boiling point is -163°C. Under that condition, the use of metal is restricted, and IMO defined applicable materials through IGC code. Among the metals, 9% nickel steel is one of excellent mechanical properties such as yield strength and tensile strength in cryogenic condition. Thus 9% nickel steel is widely used in cryogenic storage containers for ships. In addition, laser welding, which minimizes thermoelastic distortion by applying a concentrated heat source to a narrow area for a short period of time, is in the spotlight. So, this study is a basic research to predict and respond to thermal distortion during laser welding. Secondary version of the representative heat source model was derived through the author's previous research with STS304L, and the heat source model was derived by applying the heat source model to 9% nickel steel in this study. 9% nickel steel is a material that is in high demand and is widely used in the manufacture of cryogenic containers, so this study is expected to be able to respond immediately to the field.
Abstract
Due to environmental pollution, regulations on fossil fuels are required. There is a movement for the regulations by using LNG fueled propulsion ships. LNG is an eco-friendly fuel that does not emit NOx or SOx during combustion, but its boiling point is -163°C. Under that condition, the use of metal is restricted, and IMO defined applicable materials through IGC code. Among the metals, 9% nickel steel is one of excellent mechanical properties such as yield strength and tensile strength in cryogenic condition. Thus 9% nickel steel is widely used in cryogenic storage containers for ships. In addition, laser welding, which minimizes thermoelastic distortion by applying a concentrated heat source to a narrow area for a short period of time, is in the spotlight. So, this study is a basic research to predict and respond to thermal distortion during laser welding. Secondary version of the representative heat source model was derived through the author's previous research with STS304L, and the heat source model was derived by applying the heat source model to 9% nickel steel in this study. 9% nickel steel is a material that is in high demand and is widely used in the manufacture of cryogenic containers, so this study is expected to be able to respond immediately to the field.
참고문헌 (17)
- Van TC, "Global impacts of recent IMO regulations on marine fuel oil refining processes and ship emissions", Transportation Research Part D: Transport and Environment, 70, pp.123~134 (2019)
- Kim, J, "A Study on Fiber Laser Welding of High-Manganese Steel for Cryogenic Tanks", Processes, 8(12), pp.1536~ (2020)
- Park M, "A Study on Heat Input Control and a Quality Evaluation Algorithm to Prevent Toughness Deterioration of the Heat-Affected Zone in the Fiber Laser Welding Process of ASTM A553-1(9% Nickel Steel)Material", Metals, 12(7), pp.1195~ (2022)[DOI]
- 최해운, "다중 특성을 가지는 레이저 빔 제어를 통한 열영향 해석", 한국기계가공학회지, 21(1), pp.8~14 (2022), 한국기계가공학회[DOI]
- Deng D., "Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plate bead-on joints", Materials & Design, 52, pp.720~729 (2013)
- 윤태종, "GBO를 이용한 9% Ni Steel의 필렛 레이저 용접 공정 최적화", 대한용접접합학회지, 38(5), pp.485~492 (2020), 대한용접접합학회[DOI]
- Farrokhi F., "A numerical model for full and partial penetration hybrid laser welding of thick-section steels", Optics & Laser Technology, 111, pp.671~686 (2019)
- Xu G., "Adaptive volumetric heat source models for laser beam and laser+pulsed GMAW hybrid welding processes", The International Journal of Advanced Manufacturing Technology, 57, pp.245~255 (2011)
- Kik T, "Heat Source Models in Numerical Simulations of Laser Welding", Materials, 13(11), pp.2653~ (2020)
- Wu C.S, "A new heat source model for keyhole plasma arc welding in FEM analysis of the temperature profile", Welding Journal, 85 (2006)
- C. Pyo, "A study for Heat Source Model for Fiber Laser Welding with Global Optimization Algorithm Part Ⅲ : Analysis of the Parameters with Welding Power", Journal of the Korean Society of Mechanical Technology, 97(4), pp.492~498 (2021)
- Pyo C., "A Study on Welding Deformation in Fiber Laser Welding of 9% Nickel Steel through Finite Element Analysis Part I : Implementation of Welding Heat Source Model", Processes, 9, pp.2188~ (2021)[DOI]
- C. Pyo, "A study on a representative heat source model for simulating laser welding for liquid hydrogen storage containers", Marine Structures (2022)[DOI]
- Pyo C., "Estimation of Heat Source Model’s Parameters for GMAW with Non-linear Global Optimization—Part I: Application of Multi-island Genetic Algorithm", Metals, 10(7), pp.885~ (2020)
- Deng D, "FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects", Materials & Design, 30(2), pp.359~366 (2009)
- Wang W., "Multi-Objective Aerodynamic Optimization Design Method of Compressor Rotor Based on Isight", Procedia Engineering, 15, pp.3699~3703 (2011)
- Lin, J., "Multi-agent simulated annealing algorithm with parallel adaptive multiple sampling for protein structure prediction in AB off-lattice model", Applied Soft Computing, 62, pp.491~503 (2018)