액화수소 저장 탱크용 STS 304, STS 316L 소재의 레이저 용접 적용을 위한 기초 BOP 연구
A Study on the BOP Test for Laser Welding Application of STS 304 and STS 316L to Liquified Hydrogen Tank
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Liquified hydrogen is considered a new energy resource to replace conventional fossil fuels due to environmental regulations by the IMO. When building tank for the storage and transportation of liquified hydrogen, materials need to withstand temperatures of -253°C, which is even lower than that of LNG (-163°C). Austenitic stainless steel mainly used to build liquified hydrogen tank. When building the tanks, both the base material and welding zone need to have excellent strength in cryogenic condition, however, manual arc welding has several issues due to prolonged exposure of the base material to high temperatures. Laser welding, which has some benefits like short period of exposure time and decrease of thermal affected zone, is used many industries. In this study, laser bead on plate welding was conducted to determine the laser butt welding conditions for STS 304 and STS 316L steels. After the BOP test, cross-section observations were conducted to measure and compare four bead parameters. These tendency result of laser BOP test can be used as conditions laser butt welding of STS 304 and STS 316L steel.
Abstract
Liquified hydrogen is considered a new energy resource to replace conventional fossil fuels due to environmental regulations by the IMO. When building tank for the storage and transportation of liquified hydrogen, materials need to withstand temperatures of -253°C, which is even lower than that of LNG (-163°C). Austenitic stainless steel mainly used to build liquified hydrogen tank. When building the tanks, both the base material and welding zone need to have excellent strength in cryogenic condition, however, manual arc welding has several issues due to prolonged exposure of the base material to high temperatures. Laser welding, which has some benefits like short period of exposure time and decrease of thermal affected zone, is used many industries. In this study, laser bead on plate welding was conducted to determine the laser butt welding conditions for STS 304 and STS 316L steels. After the BOP test, cross-section observations were conducted to measure and compare four bead parameters. These tendency result of laser BOP test can be used as conditions laser butt welding of STS 304 and STS 316L steel.
참고문헌 (10)
- Yang Woosung, "Tensile and Microstructural Behaviors of Austenitic Stainless Steel GTA Welds for Cryogenic Application", 대한용접접합학회지, 38(4), pp.400~408 (2020), 대한용접접합학회[DOI]
- Choi, Y. S, "Design and analysis of liquid hydrogen fuel tank for heavy duty truck", International Journal of Hydrogen Enrgy, 47(32), pp.14687~14702 (2022)
- Hwang, S. K, "Hydrogen Charging Characteristics of Austenitic Stainless Steels for the Storage Vessel of Liquid Hydrogen", pp.2016
- 김재웅, "액체수소탱크용 STS316L 소재 FCAW 용접 실험적 연구 (PART I : 용접 조건 연구)", 한국기계기술학회지, 25(2), pp.176~182 (2023), 한국기계기술학회[DOI]
- Nam, Y. H, "Low-temperature tensile and impact properties of hydrogen-charged high-manganese steel", International Journal of Hydrogen Energy, 44(13), pp.7000~7913 (2019)
- 문경만, "GTAW에 의한 스테인리스강 용접부위의 부식특성에 관한 전기화학적 평가", 한국마린엔지니어링학회지, 34(5), pp.678~685 (2010), 한국마린엔지니어링학회
- Hwang, S. C, "A Study on the Laser Welding Optimum Conditions of STS 304 Thin Sheet", pp.2016
- 모양우, "레이저 이종용접에서의 입열량 변화에 대한 용접특성", 한국생산제조학회지, 15(2), pp.51~58 (2006), 한국생산제조학회
- Bae, K. Y, "An Analysis of Thermal Stress and Angular Distortion in Bead-on-Plate Welding Incorporating Constrained Boundary Conditions", Journal of Welding and Joining, 17(1), pp.104~115 (1999)
- 김지선, "레이저 용접조건이 극저온환경용 금속재료의 용접 비드 형상에 미치는 영향에 대한 연구Part I : 고망간강", 한국기계기술학회지, 22(4), pp.693~698 (2020), 한국기계기술학회[DOI]