LNG연료추진탱크용 ASTM A553M-17 소재의 파이버 레이저 변수에 따른 Bead on Plate 특성 연구(PART II : BOP 속도 & Energy density)
Bead on Plate Characteristics Study According to Fiber Laser Parameters of ASTM A553M-17 Material for LNG Fueled Tank (Part II : BOP Speed & Energy Density)
5
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Due to stricter environmental regulations of the International Maritime Organization (IMO), the number of ships fueled by Liquefied Natural Gas (LNG) is rapidly increasing. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) limits the material of tanks that can store cryogenic substances such as LNG. Among the materials listed in the IGC Code, ASTM A553M-17 has been recently adopted as a material for LNG fuel tank projects because of its excellent mechanical properties at cryogenic temperatures. In shipyards, this material is being used to build tanks through Flux Cored Arc Welding (FCAW). However, there is a problem that magnetization occurs during welding and there is a big difference in welding quality depending on the welding position. In order to overcome this problem, this study intends to conduct basic research to apply laser welding to ASTM A553M-17 material. As a result of analyzing the bead shape according to laser BOP speed and Energy density performed in this study, it was confirmed that the penetration and energy density are proportional but the penetration and BOP speed are inverse proportional to some extent. In addition, a range of suitable welding speed and energy density were proposed for the 6.1mm thickness material performed in this study.
Abstract
Due to stricter environmental regulations of the International Maritime Organization (IMO), the number of ships fueled by Liquefied Natural Gas (LNG) is rapidly increasing. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) limits the material of tanks that can store cryogenic substances such as LNG. Among the materials listed in the IGC Code, ASTM A553M-17 has been recently adopted as a material for LNG fuel tank projects because of its excellent mechanical properties at cryogenic temperatures. In shipyards, this material is being used to build tanks through Flux Cored Arc Welding (FCAW). However, there is a problem that magnetization occurs during welding and there is a big difference in welding quality depending on the welding position. In order to overcome this problem, this study intends to conduct basic research to apply laser welding to ASTM A553M-17 material. As a result of analyzing the bead shape according to laser BOP speed and Energy density performed in this study, it was confirmed that the penetration and energy density are proportional but the penetration and BOP speed are inverse proportional to some extent. In addition, a range of suitable welding speed and energy density were proposed for the 6.1mm thickness material performed in this study.
참고문헌 (11)
- K. Li, "Determinants of ship operators’ options for compliance with IMO 2020", Transportation Research Part D: Transport and Environment, 86, pp.102459~ (2020)
- 이진성, "An experimental study on fatigue performance of cryogenic metallic materials for IMO type B tank", International Journal of Naval Architecture and Ocean Engineering, 5(4), pp.580~597 (2013), 대한조선학회
- J. Kim, "Laser Welding of ASTM A553-1(9% Nickel Steel)(PART I : Penetration Shape by Bead on Plate)", Metals, 10(4), pp.484~ (2020)
- J. Kim, "Laser Welding of ASTM A553-1(9% Nickel Steel)(PART II : Comparison of Mechanical Properties with FCAW)", Metals, 10(8), pp.999~ (2020)
- 김보언, "9 wt.% 니켈강 소재를 활용한 선박용 LNG Fuel Tank 초기 설계 및 용접부 성능 평가", 대한용접접합학회지, 37(6), pp.555~563 (2019), 대한용접접합학회[DOI]
- 김영균, "9% 니켈강 후판 용접부의 강도 및 잔류응력", 동력시스템공학회지, 18(4), pp.85~90 (2014), 한국동력기계공학회
- 한일욱, "Ni가 첨가된 고망간 용접봉의 입열량에 따른 인장 특성과 미세조직의 영향", 대한용접접합학회지, 36(1), pp.10~17 (2018), 대한용접접합학회[DOI]
- 표창민, "선박 극저온 탱크용 고망간강 소재 맞대기 용접부 기계 물성 분석 연구", 한국기계기술학회지, 22(6), pp.1123~1128 (2020), 한국기계기술학회[DOI]
- 김지선, "레이저 용접조건이 극저온환경용 금속재료의 용접 비드 형상에 미치는 영향에 대한 연구 Part II : STS304L, STS316L", 한국기계기술학회지, 22(4), pp.733~739 (2020), 한국기계기술학회[DOI]
- K. Jang, "Welding and environmental test condition effect in weldability and strength of Al alloy", Journal of Materials Processing Technology, 164-165, pp.1038~1045 (2005)
- D. S. Kim, "A Study on Cross-Shaped Structure of Invar Material Using Cold Wire Laser Fillet Welding(PART I : Feasibility Study for Weldability)", Metals, 10(10), pp.1385~ (2020)