Parametric optimization in machining of GFRP composite by taguchi grey relational analysis
1
조회
0
다운로드
13
인용
0
참고문헌
키워드
초록
The glass fibre reinforce polymer composites are fabricated using compression molding technique. The epoxy resin is used asthe matrix material and the glass fibres are used as the reinforcing element. The glass fibre with 30 percentage in weightproportion are used as the reinforcing element and the remaining is the epoxy based matrix material. The composite laminatesare tested for its machining characteristics in CNC milling machine using solid carbide end mills. The cutting speed, feed rateand depth of cut are used as the milling process parameters and the responses are delamination factor and surface roughness. Optimal machining parameters are determined by the grey relational analysis (GRA) and discussed.
Abstract
The glass fibre reinforce polymer composites are fabricated using compression molding technique. The epoxy resin is used asthe matrix material and the glass fibres are used as the reinforcing element. The glass fibre with 30 percentage in weightproportion are used as the reinforcing element and the remaining is the epoxy based matrix material. The composite laminatesare tested for its machining characteristics in CNC milling machine using solid carbide end mills. The cutting speed, feed rateand depth of cut are used as the milling process parameters and the responses are delamination factor and surface roughness. Optimal machining parameters are determined by the grey relational analysis (GRA) and discussed.
참고문헌 (12)
- Ramanujam, , INT J PR ENG MAN, 12(4), pp.651~656 (2014)
- K. Palanikumar, , Mater. Manuf. Process, 27(3), pp.297~305 (2012)
- G. Anand, , J Braz Soc Mech Sci, 40(4), pp.1~20 (2018)
- K. Palanikumar, , J. Reinf. Plast. Compos, 25(16), pp.1739~1751 (2006)
- K. Palanikumar, , Mater. Manuf. Process, 21(8), pp.846~852 (2006)
- C. J. Rao, , Procedia Eng, 64, pp.1405~1415 (2013)
- D. K. Das, , Procedia Materials Science, 6, pp.1351~1358 (2014)
- C. -J. Tzeng, , J. Mater. Process. Technol, 209, pp.2753~2759 (2009)
- S. K. Madhavi, , Int. J. Eng. Sci. Technol, 7, pp.1~8 (2016)
- B. Rajeswari, , Measurement, 105, pp.78~86 (2017)
- R. Vinayagamoorthy, "A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite", Journal of Mechanical Science and Technology, 32(5), pp.2011~2020 (2018), 대한기계학회
- Senthil Kumar KM, "Experimental investigation of palm kernel fibre reinforced epoxy based composite", Journal of Ceramic Processing Research, 22(6), pp.731~738 (2021), 청정에너지연구소[DOI]