Minimization of delamination, surface roughness and thrust force in drilling of Al2O3 ceramic particle filled CFRP composites
0
조회
0
다운로드
17
인용
0
참고문헌
키워드
초록
Present study explores the influence of filler material and drilling parameters on delamination factors, surface roughness andthrust force in the drilling of carbon fiber reinforced epoxy composites (CFRP) using high speed steel (HSS) drill. The CFRPcomposite was fabricated by hand layup technique and the drilling tests were carried out using L27 orthogonal array (OA)design with wt% of Al2O3, spindle speed, point angle and feed rate as input process parameters. Grey Relational Analysis(GRA) is used for multi objective optimization and optimum parameter condition obtained include 4 wt% of Al2O3, 3000 rpmspeed, 100o point angle and 50 mm/min feed. The optimum set of inputs resulted in 1.1469 and 1.2918 as entry and exitdelamination factor values, 1.94 μm surface roughness and 95.29N thrust force. ANOVA is employed to find the influence ofprocess variables on output responses.
Abstract
Present study explores the influence of filler material and drilling parameters on delamination factors, surface roughness andthrust force in the drilling of carbon fiber reinforced epoxy composites (CFRP) using high speed steel (HSS) drill. The CFRPcomposite was fabricated by hand layup technique and the drilling tests were carried out using L27 orthogonal array (OA)design with wt% of Al2O3, spindle speed, point angle and feed rate as input process parameters. Grey Relational Analysis(GRA) is used for multi objective optimization and optimum parameter condition obtained include 4 wt% of Al2O3, 3000 rpmspeed, 100o point angle and 50 mm/min feed. The optimum set of inputs resulted in 1.1469 and 1.2918 as entry and exitdelamination factor values, 1.94 μm surface roughness and 95.29N thrust force. ANOVA is employed to find the influence ofprocess variables on output responses.
참고문헌 (31)
- P. E. Faria, , J. Reinf. Plast. Compos, 28(19), pp.2353~2363 (2009)
- R. Stone, , Int. J. Mac. Tools. Manuf, 36(9), pp.985~1003 (1996)
- L. M. P. Durao, , Comp. Struct, 92(7), pp.1545~1550 (2010)
- B. Ravi Sankar, , J. Bas. App. Eng. Res, 1(3), pp.19~24 (2014)
- S. O. Ismail, , Eng. Sci. Technol. Int. J, 19(4), pp.2043~2052 (2016)
- Y. Turki, , Int. J. Mach. Tools. Manuf, 87, pp.61~72 (2014)
- D. F. Liu, , Compos. Struct, 94(4), pp.1265~1279 (2012)
- R. Baptista, , Procedia Struc Integrity, 1, pp.74~81 (2016)
- T. Rajmohan, , Int. J. Part. Sci. Technol, 37(1), pp.21~30 (2016)
- S. R. Ranganatha, , Int. J. Adv. Eng. Technol, 4(3), pp.105~107 (2013)
- V. Krishnaraj, , Composites, 43(4), pp.1791~1799 (2012)
- H. Zhang, , Key Eng. Mater, 196, pp.43~52 (2001)
- U. Heisel, , Proc CIRP, 1, pp.471~476 (2012)
- L.M.P. Durao, , Proceedings of the 14th European conference on composite materials, pp.1~10 (2010), Budapest University
- A. Krishnamoorthy, , Measurement, 45(5), pp.1286~1296 (2012)
- S. Aravind, , Mater. Today : Procee, 4(3), pp.4188~4195 (2017)
- K. Abhishek, , Int. J. Adv. Manuf. Technol, 76(1-4), pp.401~416 (2015)
- M. P. Jenarthanan, , Ind. J. Eng. Mat. Sci, 22, pp.313~320 (2015)
- A. Noorul Haq, , Int. J. Adv. Manuf. Technol, 37(3-4), pp.250~255 (2008)
- R. Viswanathan, , Measurement, 159, pp.107800~ (2020)
- G. Anand, , J. Braz. Soci. Mech. Sci. Eng, 40(4), pp.214~ (2018)
- W. C. Chen, , Int. J. Mach. Tools. Manuf, 37(8), pp.1097~1108 (1997)
- J. Lin, , Int. J. Mach. Tools. Manuf, 42(2), pp.237~244 (2002)
- D. Julong, , J. Grey System, 1(1), pp.1~24 (1989)
- S. Ramesh, , Measurement, 78, pp.63~72 (2016)
- R. Viswanathan, , Pert. J. Sci. Technol, 25(1), pp.255~262 (2017)
- H. B Kaybal, , Int. J. Inno. Res. Sci. Eng. Technol, 5(12), pp.75~79 (2016)
- A. Mohanty, , Fib. Poly, 16(1), pp.188~195 (2015)
- T. Pridhar, , Int. J. Ceram. Process. Res, 21(2), pp.131~142 (2020)
- C. Chanakyan, , Int. J. Ceram. Process. Res, 21(6), pp.647~655 (2020)
- Y. C. Lin, , Int. J. Ceram. Process. Res, 16(2), pp.249~257 (2015)